EVK407I, STM32F4 Development Board
Out of stock
Waveshare EVK407I STM32F4 development platform with an XCore407I core board, JTAG/SWD, LCD interface, USB-to-UART, expansion headers, joystick and status LEDs for firmware learning, peripheral evaluation and embedded prototyping. Confirm the included core board, cables, display accessories and power supply because package contents can vary.
₨ 7,540
Out of stock
EVK407I STM32F4 board Price in Pakistan
The Waveshare EVK407I is an STM32F4 development platform combining a motherboard with the XCore407I MCU core board. Its expansion, LCD, USB-to-UART and JTAG/SWD interfaces make it useful for peripheral testing, firmware development and structured embedded-system learning.
If you are checking an EVK407I STM32F4 development board price in Pakistan, verify the included core board, display accessories and power adapter because package contents can vary. Consult the official schematic and demo-code resources before connecting external modules or selecting debugger settings.
EVK407I is an STM32 development board which consists of a mother board and a MCU core board XCore407I.
- MCU core board connector
- MCU pins expander
- JTAG/SWD interface, for debugging/programming
- LCD interface, for connecting touch screen LCD
- USB connector, USB TO UART
- 5V DC jack
- PL2303TA, onboard USB TO UART controller
- PL2303 jumper
- User LED jumper
- Joystick jumper
- 12M crystal, PL2303 clock
- User LEDs, convenient for indicating I/O status and/or program running state
- UART LEDs, UART TX/RX indicator
- Joystick
Browse more STM32 development boards at Robonation Pakistan. For setup limits and technical guidance, review the official Waveshare EVK407I wiki.
Frequently Asked Questions
What boards make up the EVK407I platform?
The EVK407I combines a development motherboard with the Waveshare XCore407I MCU core board.
Which development interfaces are available?
The listed platform includes JTAG or SWD debugging, USB-to-UART, LCD, expansion and other peripheral interfaces.
Are displays and accessories always included?
Package contents can vary, so confirm the included core board, display accessories, cables and power adapter before ordering.
Which MCU is used by the listed EVK407I configuration?
The listed platform uses the XCore407I core board based on an STM32F407-series MCU. Confirm the marking on the supplied core board before loading target-specific firmware.
Is an LCD included with every EVK407I package?
Not necessarily. The motherboard provides an LCD interface, but a display should be treated as separate unless the current package contents explicitly include one.
Based on 0 reviews
Be the first to review “EVK407I, STM32F4 Development Board”
Related products
-
AVR/Atmel, Development Boards
AVR C51 Development Board
Training and prototyping board for selected 40-pin 8051/C51 devices, including the listed STC89, STC12, AT89C and AT89S variants. Programmer requirements vary by MCU: some compatible STC devices support serial downloading, while AT89S and selected AVR devices require a suitable ISP programmer and adapter. Confirm the exact chip, socket, voltage and programming method before connecting power.
SKU: n/a -
Development Boards, STM32
STM32F401 F411 Black Pill Mini Development Board
- STM32F411CEU6 (100Mhz) with 512KB FLASH & 128KB RAM
- Onboard LDO for 5V to 3.3V DC conversion
- 2x 20 Pin Single Line Header which gives access to all the IOs. The board comes with unsoldered header connectors.
- The header for SWD Programming Interface
- Switches for Reset, Boot Mode, User
- LED for Power and another connected on GPIO(C13)
- 25MHZ high speed crystal, 32.768Khz low speed crystal
- BOOT0 and NRST, releasing NRST to access serial port download, and DFU download, using ST multi-in-one STM32 Cube Programmer burning software.
- Option to solder SPI Memory on the bottom side of the board.
- USB-C type Connector
SKU: n/a -
Development Boards, STM32
STM32F103C8T6 Blue Pill STM32f103 Arm Cortex Dev Board
- 100% Brand new and high-quality STM32 Board
- 72MHz work frequency.
- 64K flash memory, 20K SRAM.
- 2.0-3.6V power, I/O.
- Reset(POR/PDR).
- 4-16MHz crystal.
- Onboard Mini USB interface, you can give the board power supply and USB communication.
SKU: n/a -
Development Boards, STM32
STM32F746G-DISCO
STM32F746G-DISCO Discovery kit based on the STM32F746NG Arm Cortex-M7 MCU, with a 4.3-inch capacitive touch display, onboard ST-LINK, external memory, audio, Ethernet, USB and Arduino Uno V3 expansion support for advanced embedded development. Review the official board documentation before assigning pins or connecting external hardware.
SKU: n/a
There are no reviews yet.