STM32F746G-DISCO
Out of stock
STM32F746G-DISCO Discovery kit based on the STM32F746NG Arm Cortex-M7 MCU, with a 4.3-inch capacitive touch display, onboard ST-LINK, external memory, audio, Ethernet, USB and Arduino Uno V3 expansion support for advanced embedded development. Review the official board documentation before assigning pins or connecting external hardware.
₨ 16,500 ₨ 20,800
Out of stock
STM32F746G-DISCO Price in Pakistan
The STM32F746G-DISCO is a feature-rich development platform based on the STM32F746NG Arm Cortex-M7 microcontroller. Its integrated colour touch display, ST-LINK debugger, external memory, audio, Ethernet and expansion interfaces support advanced embedded GUI, connectivity and control projects.
If you are comparing an STM32F746G-DISCO price in Pakistan, review the exact board revision, included accessories and required USB cables before ordering. ST provides schematics, user manuals and STM32Cube examples for the kit, which makes the board suitable for structured learning as well as complex prototyping.
Features
- STM32F746NGH6 microcontroller featuring 1 Mbytes of Flash memory and 340 Kbytes of RAM, in BGA216 package
- On-board ST-LINK/V2-1 supporting USB re-enumeration capability
- Mbed-enabled (mbed.org)
- USB functions: virtual COM port, mass storage, debug port
- 4.3-inch 480×272 color LCD-TFT with capacitive touch screen
- Camera connector
- SAI audio codec
- Audio line in and line out jack
- Stereo speaker outputs
- Two ST MEMS microphones
- SPDIF RCA input connector
- Two pushbuttons (user and reset)
- 128-Mbit Quad-SPI Flash memory
- 128-Mbit SDRAM (64 Mbits accessible)
- Connector for microSD card
- RF-EEPROM daughterboard connector
- USB OTG HS with Micro-AB connectors
- USB OTG FS with Micro-AB connectors
- Ethernet connector compliant with IEEE-802.3-2002
- Five power supply options:
- ST LINK/V2-1
- USB FS connector
- USB HS connector
- VIN from Arduino connector
- External 5 V from connector
- Power supply output for external applications: 3.3 V or 5 V
- Arduino Uno V3 connectors
- Comprehensive free software including a variety of examples, part of STM32Cube package
- Supported by a wide choice of integrated development environments
Browse more STM32 development boards at Robonation Pakistan. For setup limits and technical guidance, review the official ST 32F746GDISCOVERY page.
Frequently Asked Questions
Which microcontroller is used on the STM32F746G-DISCO?
The board is based on the STM32F746NG Arm Cortex-M7 microcontroller.
Does the STM32F746G-DISCO include a display?
Yes. It includes a 4.3-inch 480 by 272 colour LCD-TFT with a capacitive touch screen.
Is an external debugger required?
No external debugger is normally required for initial development because the board includes an onboard ST-LINK debugger and programmer.
Can Arduino Uno shields be used with this board?
The board provides Arduino Uno V3-style connectors, but check each shield's voltage, pin use and software compatibility before connecting it.
Where can development resources for STM32F746G-DISCO be found?
ST provides board documentation, schematics and STM32Cube examples for the 32F746GDISCOVERY platform on its official product page.
Based on 0 reviews
Be the first to review “STM32F746G-DISCO”
Related products
-
Development Boards, Other SBCs
Teensy 3.1
The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy 3.1 brings a 32 bit ARM Cortex microprocessor into the mix so you can do some serious number crunching.
The Teensy 3.1 comes pre-flashed with a bootloader so you can program it using the on-board USB connection: No external programmer needed! You can program for the Teensy in your favorite program editor using C or you can install the Teensyduino add-on for the Arduino IDE and write Arduino sketches for Teensy!
The processor on the Teensy also has access to the USB and can emulate any kind of USB device you need it to be, making it great for USB-MIDI and other HID projects. The 32 bit processor brings a few other features to the table as well, such as multiple channels of Direct Memory Access, several high-resolution ADCs and even an I2S digital audio interface! There are also 4 separate interval timers plus a delay timer! Oh yeah, and all pins have interrupt capability. Also, it can provide system voltage of 3.3V to other devices at up to 100mA.
SKU: n/a -
Development Boards, STM32
STM32F4 Discovery – Arm Cortex M4 Processor kit
- STM32F407VGT6 microcontroller featuring 32-bit ARM Cortex-M4F core, 1 MB Flash, 192 KB RAM in an LQFP100 package
- On-board ST-LINK/V2 with selection mode switch to use the kit as a standalone ST-LINK/V2 (with SWD connector for programming and debugging)
- Board power supply: through USB bus or from an external 5 V supply voltage
- External application power supply: 3 V and 5 V
- LIS302DL or LIS3DSH ST MEMS 3-axis accelerometer
- MP45DT02, ST MEMS audio sensor, omni-directional digital microphone
- CS43L22, audio DAC with integrated class D speaker driver
- Eight LEDs:
- LD1 (red/green) for USB communication
- LD2 (red) for 3.3 V power on
- Four user LEDs, LD3 (orange), LD4 (green), LD5 (red) and LD6 (blue)
- 2 USB OTG LEDs LD7 (green) VBus and LD8 (red) over-current
- Two push buttons (user and reset)
- USB OTG FS with micro-AB connector
- Extension header for all LQFP100 I/Os for quick connection to prototyping board and easy probing
SKU: n/a -
Development Boards, STM32
STM32F103C8T6 Blue Pill STM32f103 Arm Cortex Dev Board
- 100% Brand new and high-quality STM32 Board
- 72MHz work frequency.
- 64K flash memory, 20K SRAM.
- 2.0-3.6V power, I/O.
- Reset(POR/PDR).
- 4-16MHz crystal.
- Onboard Mini USB interface, you can give the board power supply and USB communication.
SKU: n/a
There are no reviews yet.