Wireless 24 Key RGB LED Remote Control with 16 color options, dimmable brightness, and dynamic modes including Flash, Strobe, Fade, and Smooth. Ideal replacement remote for RGB LED lights and LED furniture.
Special Offer
save 37%
Soldering Wick
₨ 189-
Arduino & IOT Boards, Boards
Arduino UNO R3 SMD – Economic
- ATmega328-AU microcontroller with UNO Bootloader Installed.
- USB Programming Facilitated by the CH340G.
- Input voltage – 7-15V.
- 0-5V outputs with 3.3V compatible inputs.
- 14 Digital I/O Pins (6 PWM outputs).
- 6 Analog Inputs.
- ISP Header.
- 32k Flash Memory.
- 16MHz Clock Speed.
- All SMD Construction.
- R3 Shield Compatible
SKU: ARD-317-1 -
-
Arduino & IOT Boards, Kits
Beginner Arduino Uno Starter Kit
In Pakistan, the Arduino Starter Kit Arduino Basic Kit Arduino Beginner Kit is the finest educational option for learning how to utilize the Arduino platform. It includes an Arduino Uno SMD board, an enhanced version of the R3, a variety of sensors and, Motor, led’s Dot-matrix, Lcd, and many other components required for the very first steps with electronics into the realm of interactive and sensing objects. The Arduino Starter Kit is an excellent present for children aged 9 to 99. The Arduino starter kit is an open-source electronics prototyping platform built on adaptable, user-friendly hardware and software. It includes all of the necessary components to begin programming with the Arduino Uno board.
SKU: n/a -
Arduino & IOT Boards, Boards
Arduino MEGA 2560 PRO Mini
- Microcontroller ATmega2560
- USB-TTL converter: CH340
- Power Out:5V-800mA
- Power IN.: 5V
- Power IN. VIN/DC Jack:5V
- Power Consumption: 5V 220mA
- Logic Level: 5V
- USB: Micro USB
- Clock Frequency: 16MHz
- Operating Supply Voltage: 5V
- Digital I/O: 54
- Analog I/O: 16
- Memory Size: 256kb
- Data RAM Type/Size: 8Kb
- Data ROM Type/Size: 4Kb
- Interface Type : ISP
- Operating temperature 40C/+85C
- Length x Width:38mmx54mm
SKU: n/a -
Bread Board, circuit boards
Half Size Breadboard 400 Points For Electronics
Half Size MB102 Solderless Breadboard Prototyping Board is commonly used by students and hobbyists to quickly assemble an electronics project without using a soldering station. These Breadboard Project Board MB102 can be connected with one-another to make a larger board for complex projects
SKU: n/a -
Bread Board, circuit boards
OTH20 170 Tie Points Mini Breadboard
- This is a tiny breadboard, measuring approximately 1.8″ x 1.4″ (46mm x 36mm).
- It is half the size of a regular half-size breadboard.
- The mini breadboard is perfect for small projects and can be easily attached to the top of an Arduino proto shield.
SKU: n/a -
Keyboards, Raspberry Pi
Wireless Mini Keyboard 2.4GHz with Touchpad & Mouse
Mini 2.4 GHz Wireless Keyboard with Touchpad for Raspberry Pi Specifications and details
- Color: Black.
- LED colors Blue, Red, Green
- Operating range Up to 32ft
- Power transmission p + 5db Max.
- Operating voltage 3.3 V.
- Operating current <50 mA.
- Load current <300 mA.
- Sleep current <1 mA.
- Windows 2000 / XP / Vista / CE / Win7 / Win8 / Win10 / Linux system requirement
- Dimensions: 5.71 x 3.94 x 0.39 inches.
SKU: n/a
-
Accessories
Mastech MS6812 Cable Tracker & Network Tester
The Mastech MS6812 Cable Tracker is a professional-grade handheld network and telephone cable tester designed for technicians, installers, and IT professionals. This versatile tool combines multiple diagnostic functions in one compact unit, making it ideal for testing RJ11 telephone lines, RJ45 Ethernet network cables, and continuity checks on a wide range of wire connections.
SKU: n/a -
Optical Sensors/Photo Transistors
Baumer O300-GR (11110414) Diffuse Photoelectric Sensor
Baumer O300-GR (11110414) diffuse photoelectric sensor offering reliable non-contact object detection, high precision sensing, and stable performance for industrial automation, material handling, and manufacturing systems.
SKU: n/a -
-
Accessories
CW2000 Nickel Conductive Pen | CircuitWorks / Chemtronics – 9 g (0.32 oz) – Trace Repair & Prototyping
AccessoriesCW2000 Nickel Conductive Pen | CircuitWorks / Chemtronics – 9 g (0.32 oz) – Trace Repair & Prototyping
The CW2000 Nickel Conductive Pen by CircuitWorks (Chemtronics) is the perfect tool for repairing PCB traces, creating conductive paths, and prototyping circuits. Its nickel-based conductive ink provides excellent electrical conductivity, quick drying, and strong adhesion to most surfaces. Ideal for engineers, technicians, and students, this 9g pen offers precise, mess-free application for electronic repairs and custom circuits. No heating required—simply apply and let it dry at room temperature.
Available now at Robonation Pakistan, your trusted source for original CircuitWorks and Chemtronics products.SKU: n/a -
Digital Meter, Multi Meters
Mini DC 100V 10A Digital Voltmeter Ammeter Blue Red LED Volt Amp Meter Gauge
Digital Meter, Multi MetersMini DC 100V 10A Digital Voltmeter Ammeter Blue Red LED Volt Amp Meter Gauge
- Operating voltage: DC 4.5 – 30V
- Measure voltage: DC 0 – 100V
- Minimum resolution(V): 0.1V
- Measure current :10A (measure directly, built-in shunt)
- Minimum resolution(A): 0.01A
- Operating current:
- Dimensions: 48 x 29 x 21mm
- Mounting cutout: 45.5 x 26.5mm
- Refresh rate: about 500mS / times
- Measure accuracy: 1% (± 1 digit)
- Operating temperature: -10 to 65° c
- Operating Humidity: 10 to 80% (non-condensing)
SKU: n/a -
DIY Kits, Edison
EdSTEM Home Edison robots and EdCreate kit
Bring coding, robotics, and engineering to life with the powerful Edison Robot V3 and the interactive EdCreate Creator’s Kit – now available in Pakistan!
Perfect for students, hobbyists, and classrooms, this dynamic duo offers hands-on learning experiences that develop real-world problem-solving skills while making learning fun and engaging.
SKU: n/a
-
Solder Paste, Soldering Accessories & Tools
Soldering Paste JYD 80 grams
This Soldering Paste is Environmentally Friendly and helps create higher quality solder joints. This 80g pack will last for a long time.
Specification :
- Non-poisonous
- Non-corrosive: safe for IC and PCB.
- Smoother welding surface.
- High joint quality
- Good insulation.
- Neutral PH : 7 0.3
SKU: n/a -
Digital Meter, Multi Meters
Digital Multimeter DT9205A
- Type: Digital Multimeter
- Model:DT9205A
- Color: Yellow
- DC Voltage Range: 200mV/20V/200V/1000V
- AC Voltage Range: 200mV/2V/20V/200V/750V
- DC Current Range: 20μA/200μA/2mA/20mA/200mA/10A
- AC Current Range: 20μA/200μA/2mA/20mA/200mA/10A
- Resistance Range: 200Ω/2KΩ/20KΩ/200KΩ/2MΩ/20MΩ/200MΩ
- Capacitance Range: 2nF/20nF/200nF/2μF/20μF/100μF
- Battery :1*6F22 9V Battery(Not included)
- Size:19cmx9cmx3cm
SKU: n/a -
Adapters/Power Supply Modules, Mega Payday Sale
5A XL4015 Module Adjustable Step Down Buck Converter
- Module nature: non-isolated step-down module
- Rectification: Non-synchronous rectification
- Input voltage: 5V-32V
- Output voltage: 0.8V-30V
- Output current: adjustable Z large 5A
- Conversion efficiency: 95% (Z high)
- Switching frequency: 300KHz
- Output ripple: 50mV (Z large) 20M bandwidth
- Load regulation: 0.5% Voltage regulation: 2.5%
- Operating temperature: -40 C to + 85 C
SKU: n/a -
Products Grid
-
Arduino & IOT Boards, Boards
Arduino UNO R3 Dip WITH CABLE
- ATmega328 microcontroller
- Input voltage – 7-12V
- 14 Digital I/O Pins (6 PWM outputs)
- 6 Analog Inputs
- 32k Flash Memory
- 16Mhz Clock Speed
- ATmega328
- Operating Voltage 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) 6-20V
- Digital I/O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins 6
- DC Current per I/O Pin 40 mA
- DC Current for 3.3V Pin 150 mA
- Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader SRAM
- 2 KB (ATmega328) EEPROM
- 1 KB (ATmega328)
- Clock Speed 16 MHz
SKU: ARD-002 -
Mega Payday Sale, Module, Relay Modules, Relay Modules, Relays & Interface Module
1 Channel Relay Module
Mega Payday Sale, Module, Relay Modules, Relay Modules, Relays & Interface Module1 Channel Relay Module
- VCC: Power interface,5V
- GND: Ground
- IN: Control interface.
- Drive Current: At least 4mA
- COM: Control circuit ground, connect to GND
- Size: approx. 41 x 16 x 16mm/ 1.61 x 0.62 x 0.62”
- Weight: Approx. 12g
SKU: n/a -
Wires & Connectors
Arduino Jumper Wire M/M 40Pcs
- Compatible with 2.54 mm spacing pin headers.
- 120 pcs chromatic color jump wire.
- High quality and in good working condition.
- Durable and reusable.
- Easy to install and use.
- A popular choice for construction or repair.
- Be used for the electronic project and Genuine Arduino product.
- Flexible Breadboard Jumper Cable Wire allows you to plug and unplug easily for prototyping.
SKU: n/a -
Bread Board, circuit boards
Breadboard GL-12
- Solder less breadboard with 840 tie points.
- Self-adhesive tape is included on the back, One Terminal Strips Tie-point 640
- Two distribution strips tie-point 200.
- White ABS plastic body with printed legend. The color legend on distribution strips.
- Accept resistors, transistors, diodes, LEDS, capacitors and other types of electronic components.
- Wire size: Suitable for 29-20 AWG wires.
- Size: 175 x 67 x 8 mm
SKU: n/a
-
IR & Vision, Mega Payday Sale, SensorsIR Infrared sensor Two way Obstacle Sensor
- Reliable and accurate: Infrared obstacle avoidance sensors are a reliable and accurate way to detect objects in the environment. They are not affected by ambient light, making them a good choice for applications where there is a lot of light.
- Inexpensive: Infrared obstacle avoidance sensors are relatively inexpensive, making them a cost-effective solution for many applications.
- Easy to use: Infrared obstacle avoidance sensors are easy to use and can be integrated into a variety of applications.
- Durable: Infrared obstacle avoidance sensors are durable and can withstand harsh environments.
SKU: n/a
-
Batteries & Chargers
Powerplus Battery 9V
- Power Plus 9 Volt batteries power everyday devices
- Power for your nonstop family’s must-have devices like toys, flashlights, remotes, and more
- Nominal voltage: 9 V
- Impedance: 1,700 m-ohm @ 1 kHz
- Typical weight: 45 g (1.6 oz)
- Typical volume: 22.8 cm (1.4 in)
- Terminals: Miniature snap
- Operating temperature range: -20ºC to 54ºC (-4ºF to 130ºF)
SKU: n/a -
Distance & Proximity, Sensors
Ultrasonic Sensor HC-SR04
- Power Supply : 5V DC
- Quiescent Current : <2mA
- Working Currnt: 15mA
- Effectual Angle: <15
- Ranging Distance : 2cm 400 cm/1x13ft
- Resolution : 0.3 cm
- Measuring Angle: 30 degree
- Trigger Input Pulse width: 10uS minimum
- Dimension: 45mm x 20mm x 15mm
SKU: n/a -
Arduino & IOT Boards, Boards
Arduino UNO R3 SMD – Economic WITH CABLE
- ATmega328-AU microcontroller with UNO Bootloader Installed.
- USB Programming Facilitated by the CH340G.
- USB-B Connector and cable included.
- Input voltage – 7-15V.
- 0-5V outputs with 3.3V compatible inputs.
- 14 Digital I/O Pins (6 PWM outputs).
- 6 Analog Inputs.
- ISP Header.
- 32k Flash Memory.
- 16MHz Clock Speed.
- All SMD Construction.
- R3 Shield Compatible
SKU: ARD-317 -
Arduino & IOT Boards, Boards
Arduino Leonardo R3
he Arduino Leonardo is a microcontroller board based on the ATmega32u4 (datasheet). It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
SKU: ARD-452
Best Sellers
-
Batteries & ChargersNew 18650 Lithium Ion Battery Cell 3.7V 1500mAh – 7500mAh
Price range: ₨ 179 through ₨ 249 This product has multiple variants. The options may be chosen on the product page -
-
-
Diodes, LED Lights & Bulbs3mm Frosted LEDs
₨ 3₨ 6This product has multiple variants. The options may be chosen on the product page
-
Arduino & IOT Boards, Light, SensorsAutomatic Photocell Street Light Sun Switch Sensor 12V or 220V
₨ 399₨ 624This product has multiple variants. The options may be chosen on the product page
-
Incubator, Temperature & Humidity ControllersW3230 Temperature Controller
₨ 999₨ 1,758This product has multiple variants. The options may be chosen on the product page
Recenly Added
Solder Paste, Soldering Accessories & Tools
Soldering Paste JYD 80 grams
This Soldering Paste is Environmentally Friendly and helps create higher quality solder joints. This 80g pack will last for a long time.
Specification :
Non-poisonous
Non-corrosive: safe for IC and PCB.
Smoother welding surface.
High joint quality
Good insulation.
Neutral PH : 7 0.3
SKU: n/a
Digital Meter, Multi Meters
Digital Multimeter DT9205A
Type: Digital Multimeter
Model:DT9205A
Color: Yellow
DC Voltage Range: 200mV/20V/200V/1000V
AC Voltage Range: 200mV/2V/20V/200V/750V
DC Current Range: 20μA/200μA/2mA/20mA/200mA/10A
AC Current Range: 20μA/200μA/2mA/20mA/200mA/10A
Resistance Range: 200Ω/2KΩ/20KΩ/200KΩ/2MΩ/20MΩ/200MΩ
Capacitance Range: 2nF/20nF/200nF/2μF/20μF/100μF
Battery :1*6F22 9V Battery(Not included)
Size:19cmx9cmx3cm
SKU: n/a
Adapters/Power Supply Modules, Mega Payday Sale
5A XL4015 Module Adjustable Step Down Buck Converter
Module nature: non-isolated step-down module
Rectification: Non-synchronous rectification
Input voltage: 5V-32V
Output voltage: 0.8V-30V
Output current: adjustable Z large 5A
Conversion efficiency: 95% (Z high)
Switching frequency: 300KHz
Output ripple: 50mV (Z large) 20M bandwidth
Load regulation: 0.5% Voltage regulation: 2.5%
Operating temperature: -40 C to + 85 C
SKU: n/a
Flight Controller, Multicopter Accesories
APM2.6 Flight Controller
The ArduPilot Mega 2.6 is a complete open source autopilot system and the bestselling technology that won the prestigious 2012 Outback Challenge UAV competition. This version is ready to use, with no assembly required. It allows the user to turn any fixed, rotary wing or multirotor vehicle (even cars and boats) into a fully autonomous vehicle; capable of performing programmed GPS missions with waypoints.
This revision of the board has no onboard compass, which is designed for vehicles (especially multicopters and rovers) where the compass should be placed as far from power and motor sources as possible to avoid magnetic interference. (On fixed wing aircraft it’s often easier to mount APM far enough away from the motors and ESCs to avoid magnetic interference, so this is not as critical, but APM 2.6 gives more flexibility in that positioning and is a good choice for them, too). This is designed to be used with the 3DR uBlox GPS with Compass, so that the GPS/Compass unit can be mounted further from noise sources than APM itself.
SKU: n/a
Gear Motor, Motors & Drivers
12V DC Motor 350RPM w/Encoder (12kg*cm)
This is a gear motor with encoder. It is a motor with a 34:1 gearbox and an integrated quadrature encoder that provides a resolution of 11 pulse single per round giving a maximum output of 374 within one round. With an Arduino controller and motor driver, applications for this include a closed-loop PID control or PWM motor speed control. This motor is an ideal option for mobile robot projects. The copper output shaft, embedded thread and reinforced connector greatly extends the motor’s service life.
SKU: MOT544
Wires & Connectors
UNI-T Multimeter Probes
Universal multimeter accessory test lead kit
Multimeter test lead kits include 2 module test probes, 2 group long insulated test cable, excellent anti-interference function
Test lead kit adopted with standard diameter plug, suitable for universal measurement
Color: Red with Black as shown in the picture
SKU: n/a
Voltage Regulators
7809 Voltage Regulator
9V Positive Voltage Regulator
Minimum Input Voltage is 11V
Maximum Input Voltage is 35V
Output Current: 1.5 A
PSRR / Ripple Rejection: 55 dB
Output Type: Fixed
Internal Thermal Overload and Short circuit current limiting protection is available.
Junction Temperature maximum of 125 degree Celsius
Available in TO-220, TO-3 and KTE package
SKU: n/a
Module, Relay Modules, Relay Modules, Relays & Interface Module
16 Channel Relay Module
Product Name: 16-Channel Relay Module
Number of Channels: 16
Control Signal voltage: 5V, active low
Load Voltage: AC 250V/10A, AC 125V/15A
DC 30V 10A
Input power: 12V
Each board needs 15-20mA Driver Current
I / O port driver is active in low level.
1-16 channel optionally fully open/closed,
or any channel.
Standard interface that can be controlled directly by microcontroller
Indication LEDs for Relay output status.
Independent common end COM makes the relay convenient for users to access different signals.
Use optocoupler protection with high safety performance
Widely used for all MCU control, industrial sector, PLC control, smart home control.
Size: 8 x 5.7 x 1.2 inches
Weight: 8.8 ounces
SKU: n/a
Sensors, Temperature, Humidity
LM35 Temperature Sensor Module
Calibrated directly in Degree Celsius
Linear + 10.0 mV/C scale factor
0.5C accuracy guarantee-able (at +25C)
Rated for full 55 to +150C range
Operates from 4 to 30 volts
Less than 60mA current drain
Low self-heating, 0.08C in still air
SKU: n/a
Bluetooth, Communication Modules
HC-06 Bluetooth Module
HC-06 is a Bluetooth module designed for establishing short range wireless data communication between two microcontrollers or systems. The module works on Bluetooth 2.0 communication protocol and it can only act as a slave device. This is cheapest method for wireless data transmission and more flexible compared to other methods.
SKU: n/a