Multicopter Accesories
Showing all 37 results
-
Multicopter Accesories, Propeller
1045 PROPELLER CW/CCW
The 1045 propeller is a 10 × 4.5-inch option for compatible quadcopters and multicopters. CW and CCW rotation versions help form a balanced motor layout. Confirm the selected rotation, hub adapter, package quantity and motor compatibility before ordering.
SKU: n/a -
Multicopter Accesories, Others
3DR mini OSD
The 3DR Mini OSD is a legacy MAVLink-compatible on-screen display module for selected APM FPV systems. It overlays telemetry onto an analogue video feed. Confirm firmware, video standard, supply voltage, connector pinout and flight-controller compatibility before installation.
SKU: n/a -
Propeller
8045 Propeller
Propellers 8045(8X4.5) ABS Props have high quality propellers especially designed for multi copters. Black Propellers 8045(8X4.5) ABS Props has 15 degree angle design in the end of the propeller to avoid whirlpool multi copter flying. The Propellers 8045(8X4.5) ABS Props are light in weight and have high strength propellers. These are used in the drones as well as multi copters . The props have light weight, to help improve the air-powered efficiency and aero foil stability.
SKU: n/a -
Motors, Multicopter Accesories
A2212 1000KV Brushless DC Motor
The A2212 1000KV outrunner brushless motor is suited to compatible RC aircraft and multicopter projects. Legacy copy mixed 1000KV and 1400KV specifications; this listing should be matched to the 1000KV marking on the actual motor. Verify the propeller, battery and ESC combination before use.
SKU: n/a -
BLDC Motor, Motors, Motors & Drivers, Multicopter Accesories
A2212 2200KV Brushless DC Motor BLDC
- Recommended Voltage: 2-12VDC
- Internal Resistance: 90mΩ
- Shaft Size: 3.17mm (1.8″)
- Shaft Length: 11mm
- Motor Diameter: 27.5mm
- Motor Length (Overall): 40mm
- Current Capacity: 12A/60s
- Max Efficiency: 80%
- Max Power: 239W
- Recommended ESC: Minimum Of 18A
- Recommended Model Weight: 300-1000g
- Mounting Holes: M3
- Wire Length: ~70mm
SKU: n/a -
Flight Controller, Multicopter Accesories
APM Power Module
The power module has the ability to provide APM lossless power from a LiPo battery as well as current consumption and voltage measurements through 6-pos cable. The on board regulator switch has the ability of giving outputs 5.3V and a maximum of 2.25A from up to a 4S LiPo battery.
SKU: n/a -
Flight Controller, Multicopter Accesories
APM2.6 Flight Controller
APM 2.6 is a legacy ArduPilot flight controller for compatible aircraft, rovers and multicopters. This revision has no onboard compass and is designed to use a compatible external GPS/compass module. Verify firmware, connectors and peripheral support before building.
SKU: n/a -
Flight Controller, Multicopter Accesories
APM2.8 ArduPilot Mega 2.8 Flight Control Board
APM 2.8 is a legacy ArduPilot-compatible flight controller for fixed-wing aircraft, rovers and multicopters. This revision has no onboard compass, so a compatible external GPS/compass module is required for navigation features. Check current software support and connector orientation before building.
SKU: n/a -
DIY Kits, Multicopter Accesories, Propeller
DC Motor Propeller
Description:
For 4 bladed propeller
- Affordable, lightweight, plastic and 4-bladed propeller.
- It can be connected to the furthest limit of a DC motor.
- Use it to move little vehicles, boats, a fan, or even a wind generator!
- Incredible for use pair with a solar powered cell or a battery pack.
- Viable with a wide assortment of science fair activities.
For 3 bladed propeller:
- Affordable, lightweight, plastic, 3-bladed propeller
- Attaches with ease to any DC motor with standard 2mm shaft
- Propels small cars, boats, fans, wind generators
- Great for science fair projects
- Measures 2.75″ x 2.75″ x 0.5″
- DC motor 3v to 12v high speed
SKU: n/a -
Motors, Multicopter Accesories
EMAX CF2822 Outrunner Brushless Motor
The EMAX CF2822 is a 1200KV brushless outrunner motor for compatible small RC aircraft and foam models. The listed setup references a 3S battery and 9 to 10-inch propellers, but final selection must follow current draw, cooling and airframe requirements.
SKU: n/a -
ESC, Multicopter Accesories
ESC 30A Standard 30A BLDC ESC Electronic Speed Controller
This standard 30A brushless ESC controls a compatible BLDC motor in RC aircraft and multicopter projects. Legacy specifications list conflicting BEC output values, so confirm the rating printed on the supplied ESC. Match battery voltage, motor current, connectors and cooling before use.
SKU: n/a -
Multicopter Accesories, RC Trans. & Recv.
FlySky FS-CT6B 2.4G 6-Channels Remote control Transmitter receiver
Multicopter Accesories, RC Trans. & Recv.FlySky FS-CT6B 2.4G 6-Channels Remote control Transmitter receiver
The FlySky FS-CT6B is a 2.4GHz six-channel radio system for compatible RC aircraft, gliders and helicopters. This listing describes an FS-R6B receiver with the transmitter. Confirm the exact receiver, programming cable, batteries and accessories included in the current package.
SKU: n/a -
Multicopter Accesories, RC Trans. & Recv.
FS-T6 FlySky 6-Channel Quadcopter Transmitter
The FlySky FS-T6 is a programmable 2.4GHz six-channel transmitter for compatible RC aircraft, gliders and helicopters. It offers model memory, an LCD menu and AFHDS radio control. Confirm the receiver model and all included accessories before ordering.
SKU: n/a -
Multicopter Accesories, RC Trans. & Recv.
FS-TH9X 2.4GHz 9CH Transmitter
The FlySky FS-TH9X is a programmable 2.4GHz radio transmitter for RC aircraft, gliders, helicopters and multicopters. It provides up to nine channels, an LCD interface and model-memory functions. Confirm the receiver, RF module and accessories included with the current package before ordering.
SKU: n/a -
Batteries & Charger
IMAX B3 AC Compact Balance Charger
The iMAX B3 compact balance charger is designed for compatible 2S and 3S LiPo packs through their balance connectors. It uses AC input and status LEDs for each cell. Confirm the label, plug type and charge-current rating on the supplied unit before use.
SKU: n/a -
Batteries & Charger, Multicopter Accesories
liPo 11.1V 1000mAH 25C
This 11.1V 3S 1000mAh 25C LiPo battery is intended for compatible RC aircraft and electronics projects. Legacy copy contains conflicting weight, dimensions, burst rating and connector values, so confirm all physical and electrical details from the current pack label before ordering.
SKU: n/a -
Batteries & Charger
LiPo 11.1v 3000mAH 25C – BlackMagic
Features:
For DJI PHANTOM Quadcopter, in no-load and load conditions can be effectively enhanced blank time
Suitable for CX-20, Quanum Nova Quadcopter
Special for DJI PHANTOM 1 and FC40 Quadcopter,improve about 30% flight time than original battery
Well-designed,have a special handle for take out the battery easilySKU: BTY756 -
-
Batteries & Charger
LiPo 11.1v 6000mAH 50 – HRB
Features:
Capable of maximum continuous discharge rates up to 50C,burst rate 60C, placing this battery among the most powerful Li-Po battery packs in its class! It offer an excellent blend of weight, power and performance. Available in a wide variety of capacities and voltages, there?s a battery perfect for almost any application from indoor slow flyer to large-scale sport and aerobatic airplane models, as well as micro to mid-sized helicopter models.
SKU: BTY890 -
Batteries & Charger, Multicopter Accesories
LiPo 11.1V 900Mah 25C LION POWER
This Lion Power LiPo pack is listed as an 11.1V 3S 900mAh 25C battery for compatible RC models. The previous short description incorrectly mentioned 7.4V, so verify the voltage printed on the supplied pack, connector, dimensions and balance plug before use.
SKU: n/a -
Batteries & Charger
LiPo 14.8v 4S 5200mAH 30 LionPower
-
Capable of maximum continuous discharge rates up to 30C, burst rate 60C, placing this battery among the most powerful Li-Po battery packs in its class! It offer an excellent blend of weight, power and performance. Available in a wide variety of capacities and voltages, there’s a battery perfect for almost any application from indoor slow flyer to large-scale sport and aerobatic airplane models, as well as micro to mid-sized helicopter models
SKU: BTY892 -
-
Multicopter Accesories
NAZA M Lite with GPS
DJI NAZA-M Lite is a legacy multicopter flight-control system with stabilization, failsafe and compatible GPS-assisted functions. The title and old copy disagree about whether the GPS module is included, so confirm the exact current package, cables and VU before ordering.
SKU: n/a -
Multicopter Accesories, Others
Power Module for APM 2.8 and quadcopters
This power module is designed to supply clean power and battery-voltage/current sensing to compatible APM flight controllers. Legacy copy contains conflicting input and output ratings, so confirm the label, connectors, calibration values and battery range of the supplied module before use.
SKU: n/a -
Flight Controller, Multicopter Accesories
QQ Thunder Flight Controller
The QQ Thunder is a compact multicopter flight controller with integrated gyroscope and accelerometer sensing. It supports selected standard, S-Bus, DSM2 and DSMX receiver configurations. Confirm board revision, receiver wiring, voltage and supported motor layout before installation.
SKU: n/a -
Frame, Multicopter Accesories
Quadcopter Frame – F450 V3
The F450 V3 is an unassembled quadcopter frame kit for compatible DIY multicopter projects. Its four-arm layout provides space for a flight controller, battery and power system. Motors, ESCs, propellers and electronics are not included unless specifically stated.
SKU: n/a -
Frame, Multicopter Accesories
Quadcopter Frame – MK X525 V3
The MK X525 V3 is a foldable-style quadcopter frame kit for compatible DIY multicopter projects. Legacy copy conflicts on wheelbase and frame material, so confirm the actual dimensions, centre plates, arms and hardware shown in the current package before ordering.
SKU: n/a -
ESC, Multicopter Accesories
SimonK ESC 30A
The SimonK 30A ESC is a brushless motor speed controller for compatible multicopters and RC aircraft. SimonK firmware is known for fast throttle response, but hardware specifications vary between manufacturers. Confirm the battery-cell range, BEC output, connectors and current rating printed on this unit.
SKU: n/a
24C16
TL082 TL082CN Operational Amplifier OPA IC in DIP-8 Package
Potentiometer 22K OHM
IN4002 Diode
DB3 - DIAC DO-35 Glass diode
1N5822 40V 3A Schottky Rectifier Diode
224 Ceramic Capacitor (220nF)
2N4401 NPN Transistor
2N5401 PNP Transistor
2N5551 NPN Transistor
BC327 PNP Transistor
BC337
BF494
BF495
EL4N35 4N35 DIP6 Optocoupler
HER107 HER-107 high efficiency rectifier diode 


































