EMAX CF2822 Outrunner Brushless Motor
Out of stock
The EMAX CF2822 is a 1200KV brushless outrunner motor for compatible small RC aircraft and foam models. The listed setup references a 3S battery and 9 to 10-inch propellers, but final selection must follow current draw, cooling and airframe requirements.
₨ 1,404
Out of stock
EMAX CF2822 1200KV Motor Price in Pakistan
The EMAX CF2822 1200KV brushless outrunner is intended for compatible lightweight RC aircraft and foam-model propulsion systems. Its outrunner construction provides useful torque for appropriately selected propellers while keeping the motor compact.
Key features and compatibility
- Model: EMAX CF2822
- Motor rating: 1200KV
- Listed motor weight is approximately 39g with wiring
- Nominal shaft diameter is listed as 3mm
- Legacy guidance suggests compatible 3S setups and 9 to 10-inch propellers after current testing
Select the battery, ESC and propeller as one power system. Even a recommended propeller can overload a motor if the battery voltage, propeller pitch or airflow changes. Use measured current and motor temperature to validate the final setup.
Before ordering: Confirm the motor label, shaft, mounting pattern and included prop adapter before ordering. Use an ESC with appropriate voltage support and current headroom, secure the motor mount and remove the propeller during electrical setup.
Browse more brushless motors and drivers at Robonation Pakistan. For additional technical context, review official EMAX product information.
Frequently Asked Questions
What is the KV rating of the EMAX CF2822?
This listing identifies the motor as the 1200KV version. Confirm the marking on the supplied motor.
Which propeller should I use?
The old listing suggests 9 to 10-inch propellers, but the correct size depends on battery voltage, pitch, airframe and measured current.
Does this motor need an ESC?
Yes. It requires a compatible brushless ESC with suitable voltage support and current headroom.
Based on 0 reviews
Be the first to review “EMAX CF2822 Outrunner Brushless Motor”
Related products
-
Flight Controller, Multicopter Accesories
QQ Thunder Flight Controller
The QQ Thunder is a compact multicopter flight controller with integrated gyroscope and accelerometer sensing. It supports selected standard, S-Bus, DSM2 and DSMX receiver configurations. Confirm board revision, receiver wiring, voltage and supported motor layout before installation.
SKU: n/a -
Batteries & Charger, Multicopter Accesories
LiPo 11.1V 900Mah 25C LION POWER
This Lion Power LiPo pack is listed as an 11.1V 3S 900mAh 25C battery for compatible RC models. The previous short description incorrectly mentioned 7.4V, so verify the voltage printed on the supplied pack, connector, dimensions and balance plug before use.
SKU: n/a -
Frame, Multicopter Accesories
Quadcopter Frame – MK X525 V3
The MK X525 V3 is a foldable-style quadcopter frame kit for compatible DIY multicopter projects. Legacy copy conflicts on wheelbase and frame material, so confirm the actual dimensions, centre plates, arms and hardware shown in the current package before ordering.
SKU: n/a -
ESC, Multicopter Accesories
SimonK ESC 30A
The SimonK 30A ESC is a brushless motor speed controller for compatible multicopters and RC aircraft. SimonK firmware is known for fast throttle response, but hardware specifications vary between manufacturers. Confirm the battery-cell range, BEC output, connectors and current rating printed on this unit.
SKU: n/a
There are no reviews yet.