Robonation Pakistan – Electronics, Robotics Kits & DIY Components

1.8V to 3.6V Supply Voltage

Low power consumption 0.5uA at 1Hz

I2C interface

Max I2C Speed: 3.5Mhz

Very low noise up to 0.02hPa (17cm)

Full calibrated

Pressure Range: 300hPa to 1100hPa (+9000m to -500m)

Weight: 1.18g

Size: 21mm x 18mm

Flight Controller, Multicopter Accesories

APM2.6 Flight Controller

Flight Controller, Multicopter Accesories

The ArduPilot Mega 2.6 is a complete open source autopilot system and the bestselling technology that won the prestigious 2012 Outback Challenge UAV competition. This version is ready to use, with no assembly required. It allows the user to turn any fixed, rotary wing or multirotor vehicle (even cars and boats) into a fully autonomous vehicle; capable of performing programmed GPS missions with waypoints.

This revision of the board has no onboard compass, which is designed for vehicles (especially multicopters and rovers) where the compass should be placed as far from power and motor sources as possible to avoid magnetic interference. (On fixed wing aircraft it’s often easier to mount APM far enough away from the motors and ESCs to avoid magnetic interference, so this is not as critical, but APM 2.6 gives more flexibility in that positioning and is a good choice for them, too). This is designed to be used with the 3DR uBlox GPS with Compass, so that the GPS/Compass unit can be mounted further from noise sources than APM itself.

Gear Motor, Motors & Drivers

12V DC Motor 350RPM w/Encoder (12kg*cm)

Gear Motor, Motors & Drivers

12V DC Motor 350RPM w/Encoder (12kg*cm)

This is a gear motor with encoder. It is a motor with a 34:1 gearbox and an integrated quadrature encoder that provides a resolution of 11 pulse single per round giving a maximum output of 374 within one round. With an Arduino controller and motor driver, applications for this include a closed-loop PID control or PWM motor speed control. This motor is an ideal option for mobile robot projects. The copper output shaft, embedded thread and reinforced connector greatly extends the motor’s service life.

SKU: MOT544

UNI-T Multimeter Probes

UNI-T Multimeter Probes

Universal multimeter accessory test lead kit

Multimeter test lead kits include 2 module test probes, 2 group long insulated test cable, excellent anti-interference function

Test lead kit adopted with standard diameter plug, suitable for universal measurement

Color: Red with Black as shown in the picture

SKU: n/a

ICs

L293D L293-D Dual H-Bridge Motor Driver

ICs

L293D L293-D Dual H-Bridge Motor Driver

Can drive 2 DC motors simultaneously in either direction

Wide voltage supply range: 4.5V to 36V

Separate input-logic supply

Internal ESD protection

High-noise-immunity inputs

Thermal shutdown

Output clamp diodes for inductive transient suppression

Voltage Regulators

7809 Voltage Regulator

Voltage Regulators

7809 Voltage Regulator

9V Positive Voltage Regulator

Minimum Input Voltage is 11V

Maximum Input Voltage is 35V

Output Current: 1.5 A

PSRR / Ripple Rejection: 55 dB

Output Type: Fixed

Internal Thermal Overload and Short circuit current limiting protection is available.

Junction Temperature maximum of 125 degree Celsius

Available in TO-220, TO-3 and KTE package

Module, Relay Modules, Relay Modules, Relays & Interface Module

16 Channel Relay Module

Module, Relay Modules, Relay Modules, Relays & Interface Module

16 Channel Relay Module

Product Name: 16-Channel Relay Module

Number of Channels: 16

Control Signal voltage: 5V, active low

Load Voltage: AC 250V/10A, AC 125V/15A

DC 30V 10A

Input power: 12V

Each board needs 15-20mA Driver Current

I / O port driver is active in low level.

1-16 channel optionally fully open/closed,

or any channel.

Standard interface that can be controlled directly by microcontroller

Indication LEDs for Relay output status.

Independent common end COM makes the relay convenient for users to access different signals.

Use optocoupler protection with high safety performance

Widely used for all MCU control, industrial sector, PLC control, smart home control.

Size: 8 x 5.7 x 1.2 inches

Weight: 8.8 ounces

SKU: n/a

Batteries & Chargers

1s 1800 ma

Batteries & Chargers

1s 1800 ma

BMP180/GY68 Pressure Sensor

Pressure, Sensors

BMP180/GY68 Pressure Sensor

1.8V to 3.6V Supply Voltage

Low power consumption – 0.5uA at 1Hz

I2C interface

Max I2C Speed: 3.5Mhz

Very low noise – up to 0.02hPa (17cm)

Fully calibrated

Pressure Range: 300hPa to 1100hPa (+9000m to -500m)

Size: 13mm x 10mm

3 Pin Crimp Shell Wire | Straight Connector pair

3 Pin Crimp Shell Wire | Straight Connector pair

This is a simple three wire cable. Great for jumping from board to board or just about anything else.

Arduino Cable Blue 1.3m

Arduino Cable Blue 1.3m

It is well designed to be durable during handling and repeated connections.

Cable transfer speed is up to 480Mbps.

USB Type: 2.0

Data transfer rate: up to 480Mbps

Connectors: USB type A tata-USB type B tata

Length: 1.3 m

Color: BLUE

Sensors, Temperature, Humidity

LM35 Temperature Sensor Module

Sensors, Temperature, Humidity

LM35 Temperature Sensor Module

Calibrated directly in Degree Celsius

Linear + 10.0 mV/C scale factor

0.5C accuracy guarantee-able (at +25C)

Rated for full 55 to +150C range

Operates from 4 to 30 volts

Less than 60mA current drain

Low self-heating, 0.08C in still air

Bluetooth, Communication Modules

HC-06 Bluetooth Module

Bluetooth, Communication Modules

HC-06 Bluetooth Module

HC-06 is a Bluetooth module designed for establishing short range wireless data communication between two microcontrollers or systems. The module works on Bluetooth 2.0 communication protocol and it can only act as a slave device. This is cheapest method for wireless data transmission and more flexible compared to other methods.

Crystals and Oscillators

10 MHz Crystal Oscillator

Crystals and Oscillators

10 MHz Crystal Oscillator

A crystal oscillator is an electronic oscillator circuit that uses the mechanical resonance of a vibrating crystal of piezoelectric material to create an electrical signal with a precise frequency. This frequency is often used to keep track of time, as in quartz wristwatches, to provide a stable clock signal for digital integrated circuits, and to stabilize frequencies for radio transmitters and receivers. The most common type of piezoelectric resonator used is the quartz crystal, so oscillator circuits incorporating them became known as crystal oscillators, but other piezoelectric materials including polycrystalline ceramics are used in similar circuits.

Transistors & Mosfet

8N60 N-Channel Power Mosfet Transistor

Transistors & Mosfet

8N60 N-Channel Power Mosfet Transistor

8N60 N-Channel Power Mosfet Transistor

Ultra low gate charge ( typical 28 nC )

Low reverse transfer capacitance ( C_rss= typical 12.0 pF )

Fast switching capability

Avalanche energy specified

Improved dv/dt capability, high ruggedness

Drain Current: I_D= 7.5A at T_C= 25

Drain Source Voltage: V_DSS= 600V

Static Drain-Source On-Resistance: R_DS(on)< 1.2

SKU: n/a

Heat, Sensors

100K NTC Thermistor

Heat, Sensors

100K NTC Thermistor

R (Ω) at 25°C: 100.0K ± 1%

Rated power 10mW at 25°C

B-value 25°-85°C: 4665K ± 1%

Dissipation Factor: 2

Thermal Time Constant: 15

Operating Temperature Range °C: –50°C to +110°C

Mega Payday Sale, Sensors, Water

Raindrop Sensor Module

Mega Payday Sale, Sensors, Water

Raindrop Sensor Module

Provide both digital and analog output

Operating voltage: 5V

Adjustable sensitivity

Output LED indicator

Compatible with Arduino

TTL Compatible

Bolt holes for easy installation

3.2 cm x 1.4 cm x 1.0 cm

Sensors, Weight

Load Cell 20Kg

Sensors, Weight

Load Cell 20Kg

Rated Output: 1.0 ±0.15mV/V

Rated Load: 20Kg

Zero Output: ±0.1mV/V

Cree: 0.03%F.S./30min

Input End: Red+, Black-

Output End: Green+, White-

Input Impedance: 1115±10% Ω

Output Impedance: 1000±10% Ω

Maximum working voltage: 15V DC

Operating temperature range: -20~60°C

Total Size: 80 x 13 x 13mm/3.14 x 0.51 x 0.51″(L x W x H)

130 Ohm 1/4Watt Resistor (5% tolerance)

130 Ohm 1/4Watt Resistor (5% tolerance)

Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.

68K Ohm 1/4 Watt Resistor (5% tolerance)

68K Ohm 1/4 Watt Resistor (5% tolerance)

Resistors are electronic components which have a specific, never-changing electrical resistance. The resistors resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and cant generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.