Communication Modules
Showing all 4 results
-
Communication Modules, RF Modules
NRF24L01 2.4GHz Wireless Transceiver Module
- Worldwide 2.4GHz ISM band operation Free license to use.
- 126 RF channels.
- High air data rate: 250kbps, 1 and 2Mbps.
- Transmitter: 11.3mA at 0dBm output power.
- Receiver: Fast AGC for improved dynamic range.
- Receiver: Integrated channel filters.
- Enhanced ShockBurst:1 to 32 bytes dynamic payload length,6 data pipe MultiCeiver for 1:6 star networks.
- Host Interface:4-pin hardware SPI,3 separate 32 bytes TX and RX FIFOs.
- Low Power Management:1.9 to 3.6V supply range.
- GFSK modulation.
- Auto packet transaction handling.
- Easy to design.
- Small size:15mm*29mm.
SKU: WRE335 -
Clearance Sale, Communication Modules, Mega Payday Sale, RFID
RC522 RFID Reader Module 13.56MHz
- Module Name: MF522-ED
- Working current 13 26mA/ DC 3.3V
- Standby current 10-13mA/DC 3.3V
- sleeping current <80uA
- peak current <30mA
- Working frequency 13.56MHz
- Card reading distance 0 60mm mifare1 card
- Protocol SPI
- data communication speed Maximum 10Mbit/s
- Card types supported mifare1 S50 mifare1 S70 mifare UltraLight mifare Pro mifare Desfire
- Dimension 40mm 60mm
- Environment
- Working temperature -20 80 degree
- Storage temperature -40 85 degree
- Humidity relevant humidity 5% 95%
- Max SPI speed: 10Mbit/s
SKU: WRE324 -
Arduino & IOT Boards, Communication Modules, Module, Wifi & Ethernet
W5500 Ethernet Network Module / Shield
Arduino & IOT Boards, Communication Modules, Module, Wifi & EthernetW5500 Ethernet Network Module / Shield
- Operating voltage: 2.97-3.63V
- Current draw: Typical: 128mA, Max: 200mA
- SPI clock frequency: Max: 80MHz
- Ethernet MAC: 10/100BASE-T
- PHY: 10BASE-T and 100BASE-T
- TCP/IP stack: TCP, UDP, IPv4, ICMP, ARP, IGMP, and PPPoE
- Hardware sockets: 8
- Internal buffer: 32KB
- Supports: SPI, WOL, and power down mode
SKU: n/a -
Communication Modules, XBee
ZigBee XCore2530 1500M
ZigBee module, features the CC2530F256 onboard, farther communication distance with PA
Overview
XCore2530 is a ZigBee module based on CC2530F256.
Basically this module can be used in two aspects :
- Develop application with the provided firmware
Combined with our provided firmware, this is a simple ZigBee wireless UART module, just as easy to use as any other UART module, and requires NO knowledge about the complicate ZigBee Specification - Develop your own firmware
In this case, you should start from the very underlying to create your solution, what’s more, debuggers (like CC Debugger) and knowledge about ZigBee Specification are also required
SKU: n/a - Develop application with the provided firmware
