GPS Arduino Shield
Out of stock
This is a GPS module breakout board with SD storage based on the u-blox NEO-6M GPS and its foot print is compatible with arduino boards . This board features an SD card socket, which makes it convenient for building data loggers.
₨ 4,799 ₨ 5,564
Out of stock
NEO-6M GPS Arduino Shield
This GPS Arduino shield combines a u-blox NEO-6M GPS-based positioning interface with onboard microSD storage. It is designed for Arduino-compatible tracking, navigation and location data-logging projects.
Key Features
- NEO-6M GPS-based positioning interface
- UART communication for GPS data
- Onboard microSD card socket for data storage
- 3.3V or 5V digital operation
- Board size: Approximately 56mm × 54mm
- Operating temperature range: -40°C to 85°C
Common Applications
- Vehicle or asset location projects
- GPS data loggers
- Navigation and mapping prototypes
- Arduino-based outdoor monitoring systems
For a compatible controller platform, see the Arduino UNO R3 with cable and confirm the shield UART and microSD pin routing before assembly.
Explore more Arduino shields available from Robonation Pakistan.
When comparing a GPS Arduino Shield price in Pakistan, check the antenna, UART pin routing and microSD requirements for your project. Allow the receiver a clear view of the sky for initial position acquisition, and verify the board revision before applying power. Arduino’s official Serial reference can help with UART data handling.
For technical and safe-use guidance, review the official u-blox NEO-6 series documentation.
Frequently Asked Questions
How does the GPS Arduino Shield communicate with a controller?
The listed NEO-6M-based GPS shield sends positioning data through a serial UART interface.
Does GPS work reliably indoors?
GPS reception is normally strongest outdoors with a clear view of the sky. Indoor use can increase acquisition time or prevent a position fix.
What should be checked before using an Arduino GPS library?
Confirm the supplied module marking, serial voltage, baud rate, antenna connection and pin routing before selecting wiring or example code.
Does the GPS Arduino Shield need a clear view of the sky?
A clear outdoor view of the sky normally provides the best satellite reception and fastest initial fix. Buildings, roofs and other obstructions can reduce performance.
Can GPS data be stored on the shield's microSD card?
The listing includes an onboard microSD socket for data-logging projects. Confirm the card format, chip-select pin and library requirements for the supplied shield revision.
Based on 0 reviews
Be the first to review “GPS Arduino Shield”
Related products
-
Arduino & IOT Boards, Module, Others, Sensors, Shields
Arduino Sensor Shield
- It has a Pin 13 LED pilot.
- It has D0-D13 IO ports.
- A0-A5 analog IO ports.
- It contains a reset button.
- It also contains a Power LED.
- It has an SD card interface.
- It contains an Ultrasonic interface.
- This expansion board has an RS232 interface.
- It has a Bluetooth interface.
- It has an APC220 interface.
- IIC interface.
- 12864 LCD Parallel interfaces.
- It contains 12864 LCD Serial Interface
SKU: n/a -
Arduino & IOT Boards, Module
LM393 Microphone Amplifier
- Detectable sound signal size
- Built-in filter-rectifier circuit, DC signal output
- Good sensitivity, built-in amplifier circuit, adjustable gain
- Voltage signal for sound intensity can be obtained by AD conversion
- Analog voltage signal output, signal amplitude VCC/2
- Compatible for Arduino sensor interface.
SKU: n/a -
Arduino & IOT Boards, Module
Rotary Encoder Module
- Working voltage: 5V
- Pulses per 360-degree revolution: 20
- Push button shaft On/Off switch
- Threaded shaft for panel mounting, also 2 mounting screw holes on the circuit board
- Standard “D” shaft, you can purchase knobs to give it a finished look
SKU: n/a -
Arduino & IOT Boards, Boards, Sensors, WIFI Modules
D1 Mini V3 Nodemcu Wifi Esp8266ex Usb Ch340c.
D1 mini is a breadboard which is compatible with WiFi development board on the ESP8266. It is a mini Arduino with WiFi module and has one analog port and 11 digital ports. t runs from 5V or 3.3V. Logic levels are 3.3V for all ports.
SKU: n/a
There are no reviews yet.