This kit combines an AD8232 single-lead analog signal-conditioning module with a compatible three-lead electrode cable for educational biopotential and signal-processing experiments. The board provides an analog output for a suitable 3.3V microcontroller or data-acquisition input.
When comparing an AD8232 ECG module with leads price in Pakistan, confirm the supplied cable, pad compatibility and board pin labels. Keep the setup battery powered or properly isolated from mains equipment, and expect motion or poor electrode contact to add noise.
Technical details
Supply voltage: DC 3.3V
Analog output
RA, LA and RL lead connections through the listed cable interface
Approximate module size: 36 × 31 × 18 mm
Listed operating-temperature range: -40°C to +85°C
Package contents
One AD8232-based signal-conditioning module
One compatible three-lead cable
Disposable electrode pads are not listed in the package contents and should be treated as separate unless the current package explicitly includes them. This kit is for electronics learning and prototyping only; it is not a medical device and must not be used for diagnosis or patient monitoring.
What is included with the AD8232 module and leads product?
The listed package includes an AD8232-based ECG module and a compatible three-lead cable. Confirm whether disposable pads are included before ordering.
What voltage should power the AD8232 board?
Use a regulated 3.3V supply and follow the pin labels on the supplied module.
Can this kit be used for medical monitoring?
No. It is intended for electronics learning and prototyping only, not diagnosis or patient monitoring.
Are disposable electrode pads included?
The listed package contents mention the module and lead cable; pads should be treated as separate unless the current package explicitly states they are included.
How is the AD8232 signal read by a microcontroller?
Connect the board's analog output to a compatible ADC input and use the lead-off pins if required, following the exact board labels and a properly isolated setup.
USB Security Tester LCD Display
1 × ₨ 699 
SD Card Reader
1 × ₨ 70 
There are no reviews yet.