Teensy 3.1
Out of stock
The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy 3.1 brings a 32 bit ARM Cortex microprocessor into the mix so you can do some serious number crunching.
The Teensy 3.1 comes pre-flashed with a bootloader so you can program it using the on-board USB connection: No external programmer needed! You can program for the Teensy in your favorite program editor using C or you can install the Teensyduino add-on for the Arduino IDE and write Arduino sketches for Teensy!
The processor on the Teensy also has access to the USB and can emulate any kind of USB device you need it to be, making it great for USB-MIDI and other HID projects. The 32 bit processor brings a few other features to the table as well, such as multiple channels of Direct Memory Access, several high-resolution ADCs and even an I2S digital audio interface! There are also 4 separate interval timers plus a delay timer! Oh yeah, and all pins have interrupt capability. Also, it can provide system voltage of 3.3V to other devices at up to 100mA.
₨ 3,744
Out of stock
Teensy 3.1 Price in Pakistan
The Teensy 3.1 is a compact 32-bit Arm Cortex-M4 development board designed for USB, audio, control and high-speed embedded projects. It can be programmed over USB and supports Arduino-style development through the Teensyduino software environment.
When comparing a Teensy 3.1 price in Pakistan, note that this is a legacy board and confirm the exact version, pinout and voltage limits before connecting peripherals. PJRC documentation should be used for USB modes, analog features and pin capabilities because some pins have special restrictions.
Features:
- 32 bit ARM Cortex-M4 72 MHz CPU (M4 = DSP extensions)
- 256K Flash Memory, 64K RAM, 2K EEPROM
- 21 High Resolution Analog Inputs (13 bits usable, 16 bit hardware)
- 34 Digital I/O Pins (5V tolerance on Digital Inputs)
- 12 PWM outputs
- 7 Timers for intervals/delays, separate from PWM
- USB with dedicated DMA memory transfers
- 3 UARTs (serial ports)
- SPI, I2C, I2S,CAN Bus, IR modulator
- I2S (for high quality audio interface)
- Real Time Clock (with user-added 32.768 crystal and battery)
- 16 DMA channels (separate from USB)
- Touch Sensor Inputs
Browse more microcontroller development boards at Robonation Pakistan. For setup limits and technical guidance, review the official PJRC Teensy 3.1 page.
Based on 0 reviews
Be the first to review “Teensy 3.1”
Related products
-
Development Boards, STM32
ST Link V2 Programmer For STM8 & STM32 Microcontroller
- PCB installed inside of aluminium alloy U disk shell, portable, safe and reliable!
- The interface definition is directly marked on the shell, which is clear, convenient, and practical!
- 5V, and 3.3V offers at the same time, allowing you to program your target board with both 5V and 3.3V
- Shell characters using laser engraving, never fade off! Permanent clarity!
- 500MA internal resettable fuse, complete protection of your expensive computer motherboard!
- The Red and blue LED indicator allows you to always observe ST-LINK V2 working conditions!
- With 4 DuPont lines, you can easily respond to different target board line orders!
- Use anti-static bag packaging.
SKU: n/a -
Development Boards, STM32
STM32F746G-DISCO
STM32F746G-DISCO Discovery kit based on the STM32F746NG Arm Cortex-M7 MCU, with a 4.3-inch capacitive touch display, onboard ST-LINK, external memory, audio, Ethernet, USB and Arduino Uno V3 expansion support for advanced embedded development. Review the official board documentation before assigning pins or connecting external hardware.
SKU: n/a -
Development Boards, STM32
STM Discovery Kit STM32F3 STM32F303VC
- STM32F303VCT6 microcontroller featuring 256 KB Flash, and 48 KB RAM in an LQFP100 package
- On-board ST-LINK/V2 with selection mode switch to use the kit as a standalone ST-LINK/V2 (with SWD connector for programming and debugging)
- Board power supply: through USB bus or from an external 3 V or 5 V supply voltage
- External application power supply: 3 V and 5 V
- L3GD20, ST MEMs motion sensor, 3-axis digital output gyroscope
- LSM303DLHC, ST MEMs system-in-package featuring a 3D digital linear acceleration sensor and a 3D digital magnetic sensor
- Ten LEDs:
- LD1 (red) for 3.3 V power on
- LD2 (red/green) for USB communication
- Eight user LEDS, LD3/10 (red), LD4/9 (blue), LD5/8 (orange) and LD6/7 (green)
- Two pushbuttons (user and reset)
- USB USER with Mini-B connector
- Extension header for all LQFP100 I/Os for quick connection to prototyping board and easy probing
SKU: n/a -
Development Boards, STM32
STM32F401 F411 Black Pill Mini Development Board
- STM32F411CEU6 (100Mhz) with 512KB FLASH & 128KB RAM
- Onboard LDO for 5V to 3.3V DC conversion
- 2x 20 Pin Single Line Header which gives access to all the IOs. The board comes with unsoldered header connectors.
- The header for SWD Programming Interface
- Switches for Reset, Boot Mode, User
- LED for Power and another connected on GPIO(C13)
- 25MHZ high speed crystal, 32.768Khz low speed crystal
- BOOT0 and NRST, releasing NRST to access serial port download, and DFU download, using ST multi-in-one STM32 Cube Programmer burning software.
- Option to solder SPI Memory on the bottom side of the board.
- USB-C type Connector
SKU: n/a
There are no reviews yet.