STM32F4 Discovery – Arm Cortex M4 Processor kit
- STM32F407VGT6 microcontroller featuring 32-bit ARM Cortex-M4F core, 1 MB Flash, 192 KB RAM in an LQFP100 package
- On-board ST-LINK/V2 with selection mode switch to use the kit as a standalone ST-LINK/V2 (with SWD connector for programming and debugging)
- Board power supply: through USB bus or from an external 5 V supply voltage
- External application power supply: 3 V and 5 V
- LIS302DL or LIS3DSH ST MEMS 3-axis accelerometer
- MP45DT02, ST MEMS audio sensor, omni-directional digital microphone
- CS43L22, audio DAC with integrated class D speaker driver
- Eight LEDs:
- LD1 (red/green) for USB communication
- LD2 (red) for 3.3 V power on
- Four user LEDs, LD3 (orange), LD4 (green), LD5 (red) and LD6 (blue)
- 2 USB OTG LEDs LD7 (green) VBus and LD8 (red) over-current
- Two push buttons (user and reset)
- USB OTG FS with micro-AB connector
- Extension header for all LQFP100 I/Os for quick connection to prototyping board and easy probing
₨ 15,999 ₨ 18,720
STM32F4 Discovery board Price in Pakistan
The STM32F4 Discovery board is an STM32F407-based development kit for learning Arm Cortex-M4 programming, real-time control, audio processing and embedded peripherals. It includes an onboard ST-LINK debugger plus motion, microphone, audio-output, LED, button and USB resources.
When checking an STM32F4 Discovery board price in Pakistan, confirm the board revision and MCU marking because supporting components can vary between revisions. Use ST schematics, user manuals and STM32Cube examples to plan pin usage, clock setup and peripheral access before attaching external hardware.
Features
- STM32F407VGT6 microcontroller featuring 32-bit ARM Cortex-M4F core, 1 MB Flash, 192 KB RAM in an LQFP100 package
- On-board ST-LINK/V2 with selection mode switch to use the kit as a standalone ST-LINK/V2 (with SWD connector for programming and debugging)
- Board power supply: through USB bus or from an external 5 V supply voltage
- External application power supply: 3 V and 5 V
- LIS302DL or LIS3DSH ST MEMS 3-axis accelerometer
- MP45DT02, ST MEMS audio sensor, omni-directional digital microphone
- CS43L22, audio DAC with integrated class D speaker driver
- Eight LEDs:
- LD1 (red/green) for USB communication
- LD2 (red) for 3.3 V power on
- Four user LEDs, LD3 (orange), LD4 (green), LD5 (red) and LD6 (blue)
- 2 USB OTG LEDs LD7 (green) VBus and LD8 (red) over-current
- Two push buttons (user and reset)
- USB OTG FS with micro-AB connector
- Extension header for all LQFP100 I/Os for quick connection to prototyping board and easy probing
Browse more STM32 development boards at Robonation Pakistan. For setup limits and technical guidance, review the official ST STM32F4DISCOVERY page.
Frequently Asked Questions
Which MCU is on the STM32F4 Discovery board?
The listed board uses the STM32F407VGT6 Arm Cortex-M4 microcontroller.
What onboard peripherals are included?
The board includes ST-LINK debugging, a motion sensor, digital microphone, audio DAC, LEDs, buttons and USB connectivity.
Which software can be used with the board?
It is supported by STM32Cube tools and common Arm development environments. Check the exact board revision in the official ST documentation.
Can the onboard ST-LINK program an external target?
Supported board revisions can expose the onboard ST-LINK for external SWD programming, but confirm the jumper or switch arrangement in the manual for the exact board supplied.
Why should the STM32F4 Discovery board revision be checked?
Accelerometer, debugger and connector details can differ between revisions, so match the board marking with the correct ST user manual and schematic.
Based on 0 reviews
Be the first to review “STM32F4 Discovery – Arm Cortex M4 Processor kit”
Related products
-
Development Boards, STM32
STM32L152C-DISCO, STM32L Discovery Kit
STM32L152C-DISCO ultra-low-power Discovery kit based on the STM32L152RC Cortex-M3 MCU, featuring onboard ST-LINK, segment LCD, touch controls, current measurement, LEDs, buttons and accessible I/O for low-power embedded development. Use the official ST manual when configuring power modes, LCD segments, touch inputs or expansion pins.
SKU: n/a -
Development Boards, STM32
STM32F103C8T6 Blue Pill STM32f103 Arm Cortex Dev Board
- 100% Brand new and high-quality STM32 Board
- 72MHz work frequency.
- 64K flash memory, 20K SRAM.
- 2.0-3.6V power, I/O.
- Reset(POR/PDR).
- 4-16MHz crystal.
- Onboard Mini USB interface, you can give the board power supply and USB communication.
SKU: n/a -
Development Boards, STM32
ST Link V2 Programmer For STM8 & STM32 Microcontroller
- PCB installed inside of aluminium alloy U disk shell, portable, safe and reliable!
- The interface definition is directly marked on the shell, which is clear, convenient, and practical!
- 5V, and 3.3V offers at the same time, allowing you to program your target board with both 5V and 3.3V
- Shell characters using laser engraving, never fade off! Permanent clarity!
- 500MA internal resettable fuse, complete protection of your expensive computer motherboard!
- The Red and blue LED indicator allows you to always observe ST-LINK V2 working conditions!
- With 4 DuPont lines, you can easily respond to different target board line orders!
- Use anti-static bag packaging.
SKU: n/a -
Development Boards, STM32
STM Discovery Kit STM32F3 STM32F303VC
- STM32F303VCT6 microcontroller featuring 256 KB Flash, and 48 KB RAM in an LQFP100 package
- On-board ST-LINK/V2 with selection mode switch to use the kit as a standalone ST-LINK/V2 (with SWD connector for programming and debugging)
- Board power supply: through USB bus or from an external 3 V or 5 V supply voltage
- External application power supply: 3 V and 5 V
- L3GD20, ST MEMs motion sensor, 3-axis digital output gyroscope
- LSM303DLHC, ST MEMs system-in-package featuring a 3D digital linear acceleration sensor and a 3D digital magnetic sensor
- Ten LEDs:
- LD1 (red) for 3.3 V power on
- LD2 (red/green) for USB communication
- Eight user LEDS, LD3/10 (red), LD4/9 (blue), LD5/8 (orange) and LD6/7 (green)
- Two pushbuttons (user and reset)
- USB USER with Mini-B connector
- Extension header for all LQFP100 I/Os for quick connection to prototyping board and easy probing
SKU: n/a
There are no reviews yet.