12V DC Water/Gas Flow Solenoid Valve Normally Closed Subtotal: ₨ 799
-15%
Development Boards, STM32
Core429I, STM32F4 Core Board
Availability:
Out of stock
Waveshare Core429I STM32F4 core board based on the STM32F429IGT6 Cortex-M4 MCU, with SDRAM, USB support, power controls, JTAG/SWD debugging and full I/O expansion for custom embedded prototypes and carrier-board development. Check the official schematic, power requirements and connector pinout before designing expansion hardware.
₨ 15,999 ₨ 18,720
Out of stock
Core429I STM32F4 board Price in Pakistan
The Waveshare Core429I is a compact STM32F429IGT6 core board for high-performance Arm Cortex-M4 embedded development. It exposes MCU I/O through expansion headers and includes supporting memory, power, USB and JTAG/SWD resources for custom carrier boards and laboratory prototypes.
When comparing a Core429I STM32F4 board price in Pakistan, confirm that the connector layout, power arrangement and debugger match your project. Review the official schematic and board documentation before using USB host functions, external power or custom expansion hardware.
- STM32F429IGT6:the high performance STM32 MCU which features:
- Core: Cortex-M4 32-bit RISC
- Feature: single-cycle DSP instructions
- Operating Frequency: 180MHz, 225 DMIPS/1.25 DMIPS/MHz
- Operating Voltage: 1.8V-3.6V
- Package: LQFP176
- Memories: 1024kB Flash, 256+4kB SRAM
- MCU communication Interfaces:
- 6 x SPI, 4 x USART, 4 x UART, 2 x I2S, 1 x SAI, 3 x I2C
- 1 x FMC, 1 x SDIO, 2 x CAN
- 1 x LCD-TFT
- 1 x USB 2.0 HS/FS controller (with dedicated DMA)
- 1 x USB HS ULPI (external PHY required)
- 1 x 10/100 Ethernet MAC
- 1 x 8 to 14-bit camera interface
- AD & DA converters: 3 x AD (12-bit, 1s, shares 24 channels); 2 x DA (12-bit)
- Debugging/Programming: supports JTAG/SWD interfaces, supports IAP
- IS42S16400J: SDRAM 1 Meg Bits x 16 Bits x 4 Banks (64-MBIT)
- AMS1117-3.3: 3.3V voltage regulator
- MIC2075: onboard USB power management device
- Power supply switch, powered from 5Vin or USB connection
- Boot mode selection, for configuring BOOT0 pin
- Power indicator
- VBUS LED
- Reset button
- 8M crystal
- 32.768K crystal, for internal RTC with calibration
- JTAG/SWD interface: for debugging/programming
- USB connector, supports Device and/or Host
- MCU pins expander, VCC, GND and all the I/O pins are accessible on expansion connectors for further expansion
- 5Vin pinheader, 5V power supply is required when using USB HOST/OTG
- USB OTG/HOST jumper
- short the jumper when using USB OTG/HOST
- open the jumper to disconnect from related I/O port
- VBAT selection jumper
- short the jumper to use system power supply
- open the jumper to connect the VBAT to external power, such as battery
- VREF selection jumper
- short the jumper to connect VREF+ to VCC
- open the jumper to connect VREF+ to other custom pin via jumper wire
Browse more STM32 development boards at Robonation Pakistan. For setup limits and technical guidance, review the official Waveshare Core429I wiki.
Frequently Asked Questions
Which microcontroller is used on the Core429I?
The Waveshare Core429I is designed around the STM32F429IGT6 Arm Cortex-M4 microcontroller.
Which debugging interfaces does the Core429I support?
It provides JTAG and SWD connections for programming and debugging.
Does the Core429I include expansion access?
Yes. The board exposes MCU power, ground and I/O pins through expansion connectors for custom hardware integration.
Does the Core429I include external memory?
The listed Core429I includes onboard SDRAM. Confirm the exact memory device and example configuration in the Waveshare documentation.
What should be checked before designing a carrier board?
Verify the expansion-header pinout, power rails, logic levels, boot settings and mechanical dimensions against the official schematic for the supplied revision.
Based on 0 reviews
Be the first to review “Core429I, STM32F4 Core Board”
Related products
-
AVR/Atmel, Development Boards
AVR C51 Development Board
Training and prototyping board for selected 40-pin 8051/C51 devices, including the listed STC89, STC12, AT89C and AT89S variants. Programmer requirements vary by MCU: some compatible STC devices support serial downloading, while AT89S and selected AVR devices require a suitable ISP programmer and adapter. Confirm the exact chip, socket, voltage and programming method before connecting power.
SKU: n/a -
Development Boards, STM32
STM32F401 F411 Black Pill Mini Development Board
- STM32F411CEU6 (100Mhz) with 512KB FLASH & 128KB RAM
- Onboard LDO for 5V to 3.3V DC conversion
- 2x 20 Pin Single Line Header which gives access to all the IOs. The board comes with unsoldered header connectors.
- The header for SWD Programming Interface
- Switches for Reset, Boot Mode, User
- LED for Power and another connected on GPIO(C13)
- 25MHZ high speed crystal, 32.768Khz low speed crystal
- BOOT0 and NRST, releasing NRST to access serial port download, and DFU download, using ST multi-in-one STM32 Cube Programmer burning software.
- Option to solder SPI Memory on the bottom side of the board.
- USB-C type Connector
SKU: n/a -
Development Boards, Other SBCs
Teensy 3.1
The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy 3.1 brings a 32 bit ARM Cortex microprocessor into the mix so you can do some serious number crunching.
The Teensy 3.1 comes pre-flashed with a bootloader so you can program it using the on-board USB connection: No external programmer needed! You can program for the Teensy in your favorite program editor using C or you can install the Teensyduino add-on for the Arduino IDE and write Arduino sketches for Teensy!
The processor on the Teensy also has access to the USB and can emulate any kind of USB device you need it to be, making it great for USB-MIDI and other HID projects. The 32 bit processor brings a few other features to the table as well, such as multiple channels of Direct Memory Access, several high-resolution ADCs and even an I2S digital audio interface! There are also 4 separate interval timers plus a delay timer! Oh yeah, and all pins have interrupt capability. Also, it can provide system voltage of 3.3V to other devices at up to 100mA.
SKU: n/a -
Development Boards, STM32
STM32F103C8T6 Blue Pill STM32f103 Arm Cortex Dev Board
- 100% Brand new and high-quality STM32 Board
- 72MHz work frequency.
- 64K flash memory, 20K SRAM.
- 2.0-3.6V power, I/O.
- Reset(POR/PDR).
- 4-16MHz crystal.
- Onboard Mini USB interface, you can give the board power supply and USB communication.
SKU: n/a
There are no reviews yet.