Communication Modules
Showing all 9 results
-
Arduino & IOT Boards, Bluetooth, Communication Modules, Module
AT-09 HM10 / HM-10 4.0 BLE Bluetooth Serial CC2540 CC2541 Module For IOS 6/Android 4.3
Arduino & IOT Boards, Bluetooth, Communication Modules, ModuleAT-09 HM10 / HM-10 4.0 BLE Bluetooth Serial CC2540 CC2541 Module For IOS 6/Android 4.3
- Ultra Low Standby Power 90uA ~ 400uA
- Communication Distance Range : 100 ft / 60mtr
- Super Fast Reaction Speed : 0.4 Sec.
- Built-in PCB antena
- Power Input : 3.6V To 6V DC (Cannot higher than 6V)
- Size : 43 X 15 mm
- Color : Blue
- Net weight : 4g
SKU: n/a -
Bluetooth, Communication Modules
HC-05 Bluetooth Module
The HC-05 is a very cool module which can add two-way (full-duplex) wireless functionality to your projects. You can use this module to communicate between two microcontrollers like Arduino or communicate with any device with Bluetooth functionality like a Phone or Laptop. There are many android applications that are already available which makes this process a lot easier. The module communicates with the help of USART at 9600 baud rate hence it is easy to interface with any microcontroller that supports USART. We can also configure the default values of the module by using the command mode. So if you looking for a Wireless module that could transfer data from your computer or mobile phone to microcontroller or vice versa then this module might be the right choice for you.
SKU: n/a -
Bluetooth, Communication Modules
HC-06 Bluetooth Module
HC-06 is a Bluetooth module designed for establishing short range wireless data communication between two microcontrollers or systems. The module works on Bluetooth 2.0 communication protocol and it can only act as a slave device. This is cheapest method for wireless data transmission and more flexible compared to other methods.
SKU: n/a -
Arduino & IOT Boards, Bluetooth, Communication Modules
HC-12 HC12 Si4463 433MHZ RF Wireless Serial Module With Antenna
Arduino & IOT Boards, Bluetooth, Communication ModulesHC-12 HC12 Si4463 433MHZ RF Wireless Serial Module With Antenna
- Working frequency: 433.4MHz to 473.0MHz
- Supply voltage: 3.2V to 5.5VDC
- Communication distance: 1,000m in the open space
- Serial baud rate: 1.2Kbps to 115.2Kbps（default 9.6Kbps）
- Receiving sensitivity: -117dBm to -100dBm
- Transmit power: -1dBm to 20dBm
- Interface protocol: UART/TTL
- Operating temperature: -40℃ to +85℃
- Dimensions: 27.8mm x 14.4mm x 4mm
SKU: n/a -
Clearance Sale, Communication Modules, Mega Payday Sale, RFID
RC522 RFID Reader Module 13.56MHz
- Module Name: MF522-ED
- Working current 13 26mA/ DC 3.3V
- Standby current 10-13mA/DC 3.3V
- sleeping current <80uA
- peak current <30mA
- Working frequency 13.56MHz
- Card reading distance 0 60mm mifare1 card
- Protocol SPI
- data communication speed Maximum 10Mbit/s
- Card types supported mifare1 S50 mifare1 S70 mifare UltraLight mifare Pro mifare Desfire
- Dimension 40mm 60mm
- Environment
- Working temperature -20 80 degree
- Storage temperature -40 85 degree
- Humidity relevant humidity 5% 95%
- Max SPI speed: 10Mbit/s
SKU: WRE324 -
Communication Modules, GSM and GPS
SIM800L GSM Module Micro Sim Card Board
- Module models: SIM800L (latest module, performance than SIM900)
- Operating voltage: 3.7 to 4.2 V (peak current is 2A)
- Support network: China mobile, China Unicom
- Module size: 2.2 x 1.8cm
- TTL serial port can directly link to MCU. Don’t need a MAX232
- Power on automatic startup, automatic search network
- Onboard one channel indicator light (with signal slow flash, no signal quickly flash)
SKU: n/a -
Communication Modules, XBee
XBee 1mW Wire Antenna
INTRODUCTION
This is the very popular 2.4GHz XBee module from Digi (formally Maxstream). These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
Pair a couple of these XBees with a Regulated Explorer, and a USB Explorer and you’ve got a great gift for that special electronics geek!SKU: WRE678 -
Communication Modules, XBee
XBee 2mW PCB Antenna – Series 2 (ZigBee Mesh)
This is the XBee XB24-Z7CIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
These are essentially the same hardware as the older Series 2.5, but have updated firmware. They will work with Series 2.5 modules if you update the firmware through X-CTU.
This Xbee also has a chip antenna which is basically a small chip that acts as an antenna. Quick, easy, cheap, and not in the way.SKU: n/a -
Communication Modules, XBee
Xbee shield V03
This shield V03 can achieve a simple two crunodal ZigBee network, achieve wireless communication between Ardu, and allows the Ardu to wireless communicate over a modified ZigBee protocol using the popular XBee module.It is a fully Assembled shield without the XBee module. It works with all XBee modules including the Series 1 and Series 2.5, standard and Pro versions.SKU: ARD593
