4WD Robo Chasis
Features:
– Simple mechanical structure, easy for installation.
– Adopts 4 decelerate DC motors, ensuring flexbility and good direction.
– Large and stable Chassis, easy for expansion.
– speed test encoding disk.
– recommend use L293D 4 motors driver board and 4 Channel Infrared Detector Tracked Photoelectricity Sensor Obstacle Avoidance
₨ 1,549 ₨ 1,872
Specfications:
– Voltage: DC3V DC5V DV6V
– Current:100ma 100ma 120ma
– speed deceleration ratio:48:1
– Tyre Diameter: 6.6cm
– size:70mm*22mm*18mm
Based on 0 reviews
Be the first to review “4WD Robo Chasis”
Related products
-
Motor Drivers, Motor Drivers, Motors & Drivers, Robotics
BTS 7960 Motor Driver 43A
- Double BTS7960 large current (43 A) H bridge driver;
- 5V isolate with MCU, and effectively protect MCU;
- 5V power indicator on board;
- voltage indication of motor driver output end;
- can solder heat sink;
- Just need four lines from MCU to driver module (GND. 5V. PWM1. PWM2);
- isolation chip 5 V power supply (can share with MCU 5 V);
- size: 4 * 5 * 1.2 cm;
SKU: n/a -
Platform Cars, Robotics
Magician Chasis 2WD
The Magician Chassis is our latest robot platform. It features two gearmotors with 65mm wheels and a rear caster. The chassis plates are cut from acrylic with a wide variety of mounting holes for sensors, controllers, power, etc. Simply bolt the two pre-cut platforms together, attach the motors and caster and add your favorite robotics controller.
SKU: n/a -
Gear Motor, Motors & Drivers, Robotics, Wheels
Motor + Wheel DC Geared 5V
- Continuous Current(A):70mA
- Output Power:-
- Protect Feature: Waterproof
- Type: Gear Motor
- Construction: Permanent Magnet
- Certification: CE
- Torque:5500g*cm
- Speed(RPM):125RPM
- Commutation: Brush
- Voltage(V):3 – 6V
- Efficiency: plastic gear motor
SKU: n/a -
Arms/Grippers/Bipped, Robotics
Standard Gripper Kit B – Straight Mount
This is the Standard Gripper Kit B, a simple and durable robotics kit that is great for getting a grip on pretty much any robotics project! Designed for use with any standard size Hitec or Futaba servo, the gripper kit is easy to assemble and requires only a Phillips Head Screwdriver. This Standard Gripper is capable of opening an impressive 6″ wide max, has an overall body length of 5″ long with a 1.3″ wide servo housing body, and offers 6-32 mounting thru-holes along the edges of the servo housing.
SKU: n/a
There are no reviews yet.