-41%
IOT Boards
NODEMCU LUA WIFI BOARD BASED ON ESP8266 CP2102 MODULE
- Wi-Fi Module The ESP-12E module is similar to the ESP-12 module but with 6 extra GPIOs.
- USB micro USB port for power, programming, and debugging
- Headers 2x 2.54mm 15-pin header with access to GPIOs, SPI, UART, ADC, and power pins
- Misc Reset and Flash buttons
- Power 5V via micro USB port
- Dimensions 49 x 24.5 x 13mm
₨ 669 ₨ 1,143
NODEMCU LUA WIFI BOARD BASED ON ESP8266 CP2102 MODULE
The Development Kit based on ESP8266, integrates GPIO, PWM, IIC, 1-Wire, and ADC all in one board. Power your development in the fastest way combined with NodeMCU Firmware! The R2 version had CP2102 USB-TTL instead, larger current support and the slim board could be put on a breadboard.
Features:
- Wi-Fi Module The ESP-12E module is similar to the ESP-12 module but with 6 extra GPIOs.
- USB micro USB port for power, programming, and debugging
- Headers 2x 2.54mm 15-pin header with access to GPIOs, SPI, UART, ADC, and power pins
- Misc Reset and Flash buttons
- Power 5V via micro USB port
- Dimensions 49 x 24.5 x 13mm
Based on 0 reviews
Be the first to review “NODEMCU LUA WIFI BOARD BASED ON ESP8266 CP2102 MODULE”
Related products
-
IOT Boards
ESP-01 Adapter Module 3.3-5V
- For Arduino series motherboards or compatible motherboards can be used directly.
- Power supply voltage: 5V
- Module operating current: 240mA (max.)
- Baud rate: Default 115200, can be modified by command
- Wireless network mode: station / softAP / SoftAP + station
- Wireless standard: 802.11 b / g / n
- WIFI @ 2.4 GHz, supports WPA / WPA2 security mode
- With a command set, and simple development, start quickly
- Uses: all kinds of DIY, home automation, sensor networks, industrial wireless control, smart cars and other equipment
SKU: n/a -
Arduino & IOT Boards, IOT Boards
ESP32-CAM WiFi + Bluetooth Camera Module
- Module Model: ESP32-CAM
- Package: DIP-16
- Size: 2740.54.5(?0.2)mm
- SPI Flash: Default 32Mbit
- RAM: Internal 520KB + External 4M PSRAM
- Bluetooth: Bluetooth 4.2 BR/EDR and BLE standards
- Wi-Fi: 802.11 b/g/n/e/i
- Support Interfaces: UART, SPI, I2C, PWM
- TF Card Support: Maximum 4G
- IO Port: 9
- Serial Port Rate: Default 115200 bps
- Image Output Format: JPEG (OV2640 only), BMP, GRAYSCALE
- Antenna: Onboard PCB antenna with a gain of 2dBi
- Power Supply Range: 5V
- Operating Temperature: -20°C to 85°C
SKU: n/a -
Arduino & IOT Boards, IOT Boards
ESP32 S3 Wroom 1 Development Board In Pakistan ESP 32 S3
- 512 KiB SRAM, 384 KiB ROM, and 16 KiB RTC SRAM
- Capable of connecting to external PSRAM and Flash via Quad SPI or Octal SPI, and share the same 32 MiB address space
- Ultra-low power RISC-V (RV32IMC) coprocessor clocked at 17.5 MHz approximately
- Ultra-low power FSM coprocessor similar to previous ESP32 and ESP32-S2
- Wi-Fi 2.4 GHz (IEEE 802.11 b/g/n)
- Bluetooth 5 (LE)
- 45 programmable GPIOs
- No integrated ethernet MAC
- 2 × 12-bit SAR ADCs, up to 20 channels
- USB OTG
SKU: n/a -
IOT Boards
ESP-12E WiFi Module
- Added six I/O serial and six SPI serial
- Support wireless 802.11 b/g/n standard
- Support the STA/AP/STA AP three work modes
- Built-in TCP/IP protocol stack, and support multiple TCP Client connection
- Support rich Socket the AT command
- Support UART/GPIO data communication interface
- Support Smart Link intelligent networking
- Support remote firmware update (OTA)
SKU: n/a
There are no reviews yet.