-
×
13S 30A 48V Li-ion Battery Protection Board BMS
1 × ₨ 3,499 -
×
12V Solenoid Lock
1 × ₨ 799
Subtotal: ₨ 4,298
-39%
Arms/Grippers/Bipped, Robotics
Robotic Metallic Claw
Availability:
Out of stock
The Kit comes with hardware, un-assemble
Clamp Max open is 55mm
Clamp total length:108mm
Clamp total width:98mm (when the Clamp open)
The plank kit is very light
Compatible with MG995 and SG90 servo motor
₨ 1,199 ₨ 1,975
Out of stock
Specifications and Features of Mechanical Metal Gripper for Robot Mechanical Claw:
- Name: 2 DOF Aluminum Robot Arm Clamp
- DOF: 2
- Paw material: aluminum alloy
- Paw weight: about 68g (without motor)
- Claws overall length: 108mm (overall maximum length when closed paw)
- Claws overall width: 98mm (maximum overall width of the paw when open)
- Paw maximum opening angle: 55mm (without expansion board when the maximum opening angle spacing of 55mm, the largest expansion board after the installation is 95mm)
- The Kit comes with hardware, assembly
- Clamp Max open is 55mm
- Clamp total length:108mm
- Clamp total width:98mm (when the Clamp open)
- Working voltage: 4.8-6V (when the Clamp open)
- The plank kit is very light
- Compatible with HS322, HS422, MG995, SG5010 servo
Based on 0 reviews
Be the first to review “Robotic Metallic Claw”
Related products
-
Arms/Grippers/Bipped, Robotics
6DOF Biped Robot
his 6DOF Biped robot is a professional small humanoid robot consist of full aluminium parts, special non-ferrous oxidation process on surface, smooth edges not hurting hands, the metal is unbleached, beautiful and durable, prevent decoloring for long time using.
The robot you can mount six micro servos, each foot is 3DOF, the robot can both walk forward or backward and crouch, stand up, turn, even can do a lot of forward roll and backward roll.The kit includes six TowerPro MG995 servos.
SKU: ROB608 -
Motor Drivers, Motor Drivers, Motors & Drivers, Robotics
A4988 Stepper driver
- Supply Voltage : 8-35 VDC.
- Current : 1.0A (no heatsink ).
- Current : 2.0A (with heat-sinking).
- logic input : 3 – 5.5V .
- Automatic current decay mode detection/choice.
- Mixed with slow current decay mode.
- The low power dissipation of synchronous rectifier.
- Internal UVLO(ultra voltage lockout).
- Crossover current protection.
- Thermal shutdown circuit.
- Ground fault protection.
- Loading and short circuit protection.
- The optional five-step mode: full, 1/2, 1/4, 1/8 and 1/16.
SKU: n/a -
Motor Drivers, Motor Drivers, Motors & Drivers, Robotics
BTS 7960 Motor Driver 43A
- Double BTS7960 large current (43 A) H bridge driver;
- 5V isolate with MCU, and effectively protect MCU;
- 5V power indicator on board;
- voltage indication of motor driver output end;
- can solder heat sink;
- Just need four lines from MCU to driver module (GND. 5V. PWM1. PWM2);
- isolation chip 5 V power supply (can share with MCU 5 V);
- size: 4 * 5 * 1.2 cm;
SKU: n/a
There are no reviews yet.