XBee 1mW Wire Antenna
Out of stock
INTRODUCTION
Pair a couple of these XBees with a Regulated Explorer, and a USB Explorer and you’ve got a great gift for that special electronics geek!
₨ 4,549 ₨ 6,760
Out of stock
SPECIFICATION
- 3.3V @ 50mA
- 250kbps Max data rate
- 1mW output (+0dBm)
- 300ft (100m) range
- Built-in antenna
- Fully FCC certified
- 6 10-bit ADC input pins
- 8 digital IO pins
- 128-bit encryption
- Local or over-air configuration
- AT or API command set
Based on 0 reviews
Be the first to review “XBee 1mW Wire Antenna”
Related products
-
Clearance Sale, Communication Modules, Mega Payday Sale, RFID
RC522 RFID Reader Module 13.56MHz
- Module Name: MF522-ED
- Working current 13 26mA/ DC 3.3V
- Standby current 10-13mA/DC 3.3V
- sleeping current <80uA
- peak current <30mA
- Working frequency 13.56MHz
- Card reading distance 0 60mm mifare1 card
- Protocol SPI
- data communication speed Maximum 10Mbit/s
- Card types supported mifare1 S50 mifare1 S70 mifare UltraLight mifare Pro mifare Desfire
- Dimension 40mm 60mm
- Environment
- Working temperature -20 80 degree
- Storage temperature -40 85 degree
- Humidity relevant humidity 5% 95%
- Max SPI speed: 10Mbit/s
SKU: WRE324 -
Bluetooth, Communication Modules
HC-05 Bluetooth Module
The HC-05 is a very cool module which can add two-way (full-duplex) wireless functionality to your projects. You can use this module to communicate between two microcontrollers like Arduino or communicate with any device with Bluetooth functionality like a Phone or Laptop. There are many android applications that are already available which makes this process a lot easier. The module communicates with the help of USART at 9600 baud rate hence it is easy to interface with any microcontroller that supports USART. We can also configure the default values of the module by using the command mode. So if you looking for a Wireless module that could transfer data from your computer or mobile phone to microcontroller or vice versa then this module might be the right choice for you.
SKU: n/a -
Arduino & IOT Boards, Bluetooth, Communication Modules
HC-12 HC12 Si4463 433MHZ RF Wireless Serial Module With Antenna
Arduino & IOT Boards, Bluetooth, Communication ModulesHC-12 HC12 Si4463 433MHZ RF Wireless Serial Module With Antenna
- Working frequency: 433.4MHz to 473.0MHz
- Supply voltage: 3.2V to 5.5VDC
- Communication distance: 1,000m in the open space
- Serial baud rate: 1.2Kbps to 115.2Kbps（default 9.6Kbps）
- Receiving sensitivity: -117dBm to -100dBm
- Transmit power: -1dBm to 20dBm
- Interface protocol: UART/TTL
- Operating temperature: -40℃ to +85℃
- Dimensions: 27.8mm x 14.4mm x 4mm
SKU: n/a -
Communication Modules, XBee
XBee 2mW PCB Antenna – Series 2 (ZigBee Mesh)
This is the XBee XB24-Z7CIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
These are essentially the same hardware as the older Series 2.5, but have updated firmware. They will work with Series 2.5 modules if you update the firmware through X-CTU.
This Xbee also has a chip antenna which is basically a small chip that acts as an antenna. Quick, easy, cheap, and not in the way.SKU: n/a
There are no reviews yet.