circuit boards
Showing all 19 results
-
circuit boards, Vero Boards
10x10cm Single Sided Universal Printed Circuit Board
Dimension : 10×10 cm / 3.9×3.9 inch (W x L)
Hole ( row x column ) : 37 x 35
Material : glass fiber FR4
Thickness : approx. 1.6mm
Hole Pitch : approx. 2.54 mm
Hole Diameter : approx. 1 mm
Mounting Hole Diameter : approx. 3 mm
Color : green basic,silver toneSKU: n/a -
circuit boards, Vero Boards
10x22cm Single Sided Universal Printed Circuit Board
Dimension : 10×22 cm / 3.9×8.6 inch (W x L)
Hole ( row x column ) : 80 x 38
Material : glass fiber FR4
Metal :Tin-plate
Thickness : approx. 1.6mm
Hole Pitch : approx. 2.54 mm
Hole Diameter : approx. 1 mm
Mounting Hole Diameter : approx. 3 mm
Color : green basic,silver toneSKU: n/a -
Bread Board, circuit boards
1660 Point Bread Board
A breadboard is referred to a solder-less breadboard. These are great units for making temporary circuits and prototyping, and they require absolutely no soldering. You just need to place the component on the breadboard equipped with a power source.
SKU: n/a -
Bread Board, circuit boards
Breadboard GL-12
- Solder less breadboard with 840 tie points.
- Self-adhesive tape is included on the back, One Terminal Strips Tie-point 640
- Two distribution strips tie-point 200.
- White ABS plastic body with printed legend. The color legend on distribution strips.
- Accept resistors, transistors, diodes, LEDS, capacitors and other types of electronic components.
- Wire size: Suitable for 29-20 AWG wires.
- Size: 175 x 67 x 8 mm
SKU: n/a -
-
-
circuit boards, PCB
Ferric Chloride for PCB Etching
1. Suggested only if you know how to etch PCBs with FeCl3.
2. You must use gloves while etching with FeCl3 as it may cause irritation to your skin.
3. Mix etchant in water, do not drop water over the etchant.
4. Do an etching procedure in open space so any chemical gas produced during the process can dissipate in the air easily.
5. Put etchant+water solution in the plastic box only.
Mix the solvent with warm water and your etching solutions is ready. You can also store and re-use the solution.
Note: High corrosive chemical, caution!! Harmful to skin and eyes. Please make sure all precautionary measures are in place like hand gloves, glasses, etc.
SKU: n/a -
Bread Board, circuit boards
Half Size Breadboard 400 Points For Electronics
Half Size MB102 Solderless Breadboard Prototyping Board is commonly used by students and hobbyists to quickly assemble an electronics project without using a soldering station. These Breadboard Project Board MB102 can be connected with one-another to make a larger board for complex projects
SKU: n/a -
Bread Board, circuit boards
OTH20 170 Tie Points Mini Breadboard
- This is a tiny breadboard, measuring approximately 1.8″ x 1.4″ (46mm x 36mm).
- It is half the size of a regular half-size breadboard.
- The mini breadboard is perfect for small projects and can be easily attached to the top of an Arduino proto shield.
SKU: n/a -
circuit boards, Vero Boards
Vero Board Normal Dots
- Easily convert circuit diagrams into working ventures.
- Make a permanent basis for your breadboard templates.
- Built specifically for dealing with DIL or DIP ICs.
- The copper has been stripped from one entire strip.
- Complex circuits can be easily built with a simple strip configuration.
- Copper tracks are electrically disconnected from one another and can be sliced to interrupt current traffic.
- With basic scissors, cutting the SRBP base material to the appropriate size is a breeze.
SKU: n/a -
circuit boards, Vero Boards
Veroboard Normal Line 14.5×6.5cm Stripboard PCB
- Stripboard Just like Veroboard
- Good quality product individually sealed to prevent tarnishing
- This item is of a superior quality to most other boards on offer and is guaranteed to be easier to solder
- This product is manufactured from copper clad laminated board
- This product is ideal for prototyping, educational products etc.
- The product is single-sided PCB prototype stripboard. Size is 65x145mm, pitch of 2.54mm, a pore size of 1.00mm.
- Pre-tinned plated holes on the board make it very handy to solder components and sensors for your projects. Stripboards to meet your demands when designing electronic experiments and DIY projects.
- High quality of durable glass fiber material with 1.3mm thickness makes a very solid and sturdy prototype circuit board, a tin plating process makes the welding component easier.
- The stripboards are easy to weld and can be cut to other sizes as desired.
SKU: n/a
