Arduino Nano V3
Arduino Nano V3 is a microcontroller board which is designed by Arduino. The same microcontroller Atmega328 is used for Arduino NANO Micro-controller and Arduino UNO. We can do a wide range of applications. It is the major microcontroller board because its size is small and it is flexible.
It has the same functionality as Arduino Duemilanove but it has a different pin package. It does not have a DC power jack. If we look at the Arduino Nano schematic, then we know that it works with a mini-B USB cable instead of the standard one.
Feature Of Arduino Nano V3:
- Microcontroller: Atmel ATmega168 or ATmega328.
- Operating Voltage (logic level): l5 V.
- Input Voltage (recommended): 7-12 V.
- Input Voltage (limits): 6-20 V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 8.
- DC Current per I/O Pin: 40 mA.
- Flash Memory: 16 KB (ATmega168) or 32 KB (ATmega328) of which 2 KB is used by the boot loader.
- SRAM : 1 KB (ATmega168) or 2 KB (ATmega328).
- EEPROM : 512 bytes (ATmega168) or 1 KB (ATmega328).
- Clock Speed: 16 MHz.
- Dimensions : 0.73 x 1.70
- Length: 45 mm.
| Microcontroller |
Atmel ATmega168 or ATmega328 |
| Operating Voltage (logic level) |
5 V |
| Input Voltage (recommended) |
7-12 V |
| Input Voltage (limits) |
6-20 V |
| Digital I/O Pins |
14 (of which 6 provide PWM output) |
| Analog Input Pins |
8 |
| DC Current per I/O Pin |
40 mA |
| Flash Memory |
16 KB (ATmega168) or 32 KB (ATmega328) of which 2 KB used by bootloader |
| SRAM |
1 KB (ATmega168) or 2 KB (ATmega328) |
| EEPROM |
512 bytes (ATmega168) or 1 KB (ATmega328) |
| Clock Speed |
16 MHz |
| Dimensions |
0.73″ x 1.70″ |
| Length |
45 mm |
| Width |
18 mm |
| Weigth |
5 g |
Arduino Sensor Shield
1 × ₨ 299 
4x4 Flat Matrix Keypad
1 × ₨ 149 
D1 Mini V3 Nodemcu Wifi Esp8266ex Usb Ch340c.
1 × ₨ 599 
BC134
1 × ₨ 26 
SUDER Soldering Iron 30W With Soldering Flux Soldering Wire 50g Soldering Foam Desoldering pump
1 × ₨ 1,299 
KY-021 Mini Magnetic Reed Module for Arduino
1 × ₨ 149 
There are no reviews yet.