-17%
IOT Boards
Esp Adaptor with Temp Sensor
Availability:
Out of stock
ESP module is an gives you WiFi connectivity and GPIO pins to connect sensors. This module comes with a temperature sensor through which we can work on application related to temperature detection through WiFi.
₨ 550 ₨ 666
Out of stock
Based on 0 reviews
Be the first to review “Esp Adaptor with Temp Sensor”
Related products
-
IOT Boards
ESP-12E WiFi Module
- Added six I/O serial and six SPI serial
- Support wireless 802.11 b/g/n standard
- Support the STA/AP/STA AP three work modes
- Built-in TCP/IP protocol stack, and support multiple TCP Client connection
- Support rich Socket the AT command
- Support UART/GPIO data communication interface
- Support Smart Link intelligent networking
- Support remote firmware update (OTA)
SKU: n/a -
Arduino & IOT Boards, IOT Boards
ESP32 S3 Wroom 1 Development Board In Pakistan ESP 32 S3
- 512 KiB SRAM, 384 KiB ROM, and 16 KiB RTC SRAM
- Capable of connecting to external PSRAM and Flash via Quad SPI or Octal SPI, and share the same 32 MiB address space
- Ultra-low power RISC-V (RV32IMC) coprocessor clocked at 17.5 MHz approximately
- Ultra-low power FSM coprocessor similar to previous ESP32 and ESP32-S2
- Wi-Fi 2.4 GHz (IEEE 802.11 b/g/n)
- Bluetooth 5 (LE)
- 45 programmable GPIOs
- No integrated ethernet MAC
- 2 × 12-bit SAR ADCs, up to 20 channels
- USB OTG
SKU: n/a -
IOT Boards
R307 Finger Print Sensor (R-307)
- Supply voltage: DC 4.2 ~ 6.0V
- Working current: 50mA (typical)
- Peak current: 80mA
- Fingerprint image input time: <0.3 seconds
- Window area: 14×18 mm
- Comparison method: (1: 1)
- Search method: (1: N)
- Characteristic file: 256 bytes
- Template file: 512 bytes
- Storage capacity: 1000 pieces
- Security Level: Five (from low to high: 1,2,3,4,5)
- Fake rate (FAR): <0.001%
- Refusal rate (FRR): <1.0%
- Search time: <1.0 seconds (1: 1000 hours, mean value)
- Host interface: UART, USB1.1
- Communication baud rate (UART): (9600xN) bps Where N = 1 ~ 12 (default N = 6, ie 57600bps)
- Working environment: Temperature: -20 ℃ – +40 ℃
- Relative humidity: 40% RH-85% RH (no condensation)
- Overall Size: 4.5×2.4x2cm
SKU: n/a -
Arduino & IOT Boards, IOT Boards
ESP32-CAM WiFi + Bluetooth Camera Module
- Module Model: ESP32-CAM
- Package: DIP-16
- Size: 2740.54.5(?0.2)mm
- SPI Flash: Default 32Mbit
- RAM: Internal 520KB + External 4M PSRAM
- Bluetooth: Bluetooth 4.2 BR/EDR and BLE standards
- Wi-Fi: 802.11 b/g/n/e/i
- Support Interfaces: UART, SPI, I2C, PWM
- TF Card Support: Maximum 4G
- IO Port: 9
- Serial Port Rate: Default 115200 bps
- Image Output Format: JPEG (OV2640 only), BMP, GRAYSCALE
- Antenna: Onboard PCB antenna with a gain of 2dBi
- Power Supply Range: 5V
- Operating Temperature: -20°C to 85°C
SKU: n/a
There are no reviews yet.