Subtotal: ₨ 449
-17%
IOT Boards
Esp Adaptor with Temp Sensor
Availability:
Out of stock
ESP module is an gives you WiFi connectivity and GPIO pins to connect sensors. This module comes with a temperature sensor through which we can work on application related to temperature detection through WiFi.
₨ 550 ₨ 666
Out of stock
Based on 0 reviews
Be the first to review “Esp Adaptor with Temp Sensor”
Related products
-
IOT Boards
Nodemcu WROOM ESP32 Wifi Based Microcontroller Development Board
- Universal low power IoT sensor hub.
- Home automation.
- Universal low power IoT recorder.
- Mesh network.
- Video streaming of the camera.
- Industrial wireless control.
- OTT TV box / set-top box device.
- Baby monitor.
- Smart Socket.
- Sensor networks.
- Wi-Fi toys: Counters, toys, Anti-lost device.
- Wearable electronic products.
- Wi-Fi speech recognition device.
- Wi-Fi location-aware devices.
SKU: n/a -
Arduino & IOT Boards, IOT Boards
ESP32 S3 Wroom 1 Development Board In Pakistan ESP 32 S3
- 512 KiB SRAM, 384 KiB ROM, and 16 KiB RTC SRAM
- Capable of connecting to external PSRAM and Flash via Quad SPI or Octal SPI, and share the same 32 MiB address space
- Ultra-low power RISC-V (RV32IMC) coprocessor clocked at 17.5 MHz approximately
- Ultra-low power FSM coprocessor similar to previous ESP32 and ESP32-S2
- Wi-Fi 2.4 GHz (IEEE 802.11 b/g/n)
- Bluetooth 5 (LE)
- 45 programmable GPIOs
- No integrated ethernet MAC
- 2 × 12-bit SAR ADCs, up to 20 channels
- USB OTG
SKU: n/a -
Accessories, Arduino & IOT Boards, IOT Boards
ESP32 CAM MB USB Programmer Board CH340G USB To Serial Port
Accessories, Arduino & IOT Boards, IOT BoardsESP32 CAM MB USB Programmer Board CH340G USB To Serial Port
-
Driver Compatibility: Requires CH340G driver installation for proper operation.
-
Supported Devices: Compatible with all ESP32-CAM boards.
-
Button Types: Includes Reset and Boot buttons.
-
LED Indicators: Power status indication.
SKU: n/a -
-
IOT Boards
ESP8266 ESP-01 WiFi Module
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP Protocol Stack
- Integrated TR switch, balun, LNA, power amplifier, and matching network
- Integrated PLLs, regulators, DCXO, and power management units
- +19.5dBm output power in 802.11b mode
- Power down leakage current of <10uA
- 1 Mb flash memory
- Integrated low-power 32 bit CPU could be used as an application processor
- SDIO 1.1/ 2.0, SPI, UART
- STBC, 1×1 MIMO, 2×1 MIMO
- A-MPDU and A-MSDU aggregation and 0.4ms guard interval
- Wake up and transmit packets in <2ms
- Standby power consumption of <1.0mW(DTIM3)
SKU: n/a
There are no reviews yet.