HCSR04 ultrasonic sensor Bracket
- Blue acrylic right-angle bracket for compatible HC-SR04 ultrasonic sensor modules
- Approximately 3 mm panel thickness
- Openings for the two ultrasonic transducers
- Base mounting points for robots and compatible servo assemblies
- Bracket listing only; confirm whether the sensor and fasteners are included
₨ 69 ₨ 187
HC-SR04 Sensor Bracket Price in Pakistan
The HC-SR04 ultrasonic sensor bracket is a blue acrylic right-angle holder for mounting a compatible distance sensor on robots, servo scanning assemblies and fixed measurement projects. It helps hold the transmitter and receiver in a stable position while providing base mounting points.
When comparing an HC-SR04 sensor bracket price in Pakistan, confirm the sensor board dimensions, transducer spacing and mounting-hole layout because compatible-looking modules can vary. This listing should be treated as the bracket only unless the current package explicitly includes a sensor or fasteners.
Compatibility and assembly
- Designed for HC-SR04-style ultrasonic sensor modules
- Approximately 3 mm acrylic panel thickness
- Right-angle format for fixed or moving robot installations
- Suitable for compatible servo scanning arrangements
Remove any protective film before assembly, align the transducer openings, and tighten fasteners gently to avoid cracking the acrylic. Keep both ultrasonic transducers unobstructed during use.
Browse more distance sensors and mounting accessories at Robonation Pakistan.
Frequently Asked Questions
Does this product include the HC-SR04 sensor?
This listing is for the acrylic mounting bracket. Confirm separately whether an ultrasonic sensor or screws are included.
What material is the bracket made from?
The listed bracket is made from blue acrylic and is designed for a right-angle HC-SR04 mounting position.
How should the acrylic bracket be assembled?
Remove any protective film, align the sensor openings and tighten fasteners gently to avoid cracking or stressing the acrylic.
Will the bracket fit every ultrasonic sensor module?
No. It is intended for HC-SR04-style modules, but board size and hole spacing can vary. Compare the supplied sensor dimensions before assembly.
Can the bracket be mounted on a servo?
It can be used in a compatible servo scanning assembly when the base holes, fasteners and servo horn arrangement match the project.
Based on 0 reviews
Be the first to review “HCSR04 ultrasonic sensor Bracket”
Related products
-
Others, Sensors
Microphone Amplifier – MAX9814 w/ Auto Gain Control
- The default ‘max gain’ is 60dB, but can be set to 40dB or 50dB by jumpering the Gain pin to VCC or ground.
- You can change the Attack/Release ratio, from the default 1:4000 to 1:2000 or 1:500.
- The ouput from the amp is about 2Vpp max on a 1.25V DC bias, so it can be easily used with any Analog/Digital converter that is up to 3.3V input. If you want to pipe it into a Line Input, just use a 1uF blocking capacitor in series.
SKU: n/a -
Flex & Force, Sensors
Flex Sensor 2.2 Inch
2.2-inch resistive flex sensor for measuring relative bend in Arduino-compatible wearables, robotics, controls and motion experiments. Resistance increases as the active strip bends. Secure the base, use a voltage-divider circuit and avoid creasing or repeatedly flexing the connector area.
SKU: n/a -
IR & Vision, Sensors
IR Obstacle Avoidance Sensor
KY-032 infrared obstacle-avoidance sensor with adjustable reflective detection and a digital active-LOW output for Arduino-compatible robotics. Detection distance varies with surface colour, texture, angle and ambient light. Verify the module supply and output logic before connecting it to a 3.3V controller.
SKU: n/a -
Pressure, Sensors
Pressure Sensor MPX5700AP
- On-chip signal conditioned, temperature compensated and calibrated
- 2.5% maximum error over 0°C to 85°C
- Ideally suited for microprocessor or microcontroller-based systems
- Patented silicon shear stress-strain gauge
- Pressure ranges from 15KPa to 700KPa
- Supply voltage ranges from 4.75VDC to 5.25VDC
- Sensitivity of 6.4mV/KPa
- Response time of 1ms
- Durable epoxy unibody element
- Operating temperature ranges from -40°C to 125°C
SKU: n/a
There are no reviews yet.