Communication Modules
Showing all 9 results
-
Communication Modules, RFID
125KHz EM18 reader module EM-18 build in coil antenna
- Operating voltage of EM-18: +4.5V to +5.5V
- Current consumption:50mA
- Can operate on LOW power
- Operating temperature: 0C to +80C
- Operating frequency:125KHz
- Communication parameter:9600bps
- Reading distance: 10cm, depending on TAG
- Integrated Antenna
SKU: n/a -
Communication Modules, GSM and GPS
GPS Neo 6m U-Blox NEO-6M GPS Module
- 5Hz position update rate
- Operating temperature range: -40 TO 85C UART TTL socket
- EEPROM to save configuration settings
- Rechargeable battery for Backup
- The cold start time of 38 s and Hot start time of 1 s
- Supply voltage: 3.3 V
- Configurable from 4800 Baud to 115200 Baud rates. (default 9600)
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN)
- Separate GPS antenna
SKU: n/a -
Arduino & IOT Boards, Communication Modules, Module, RF Modules
HW-237 2.4GHz NRF24L01+PA+LNA SMA Wireless Transceiver Module with Antenna
Arduino & IOT Boards, Communication Modules, Module, RF ModulesHW-237 2.4GHz NRF24L01+PA+LNA SMA Wireless Transceiver Module with Antenna
- Voltage: 3-3.6V (recommended 3.3V) V.
- Maximum output power: +20dBm.
- Emission mode current(peak): 115mA.
- Receive Mode Current(peak): 45mA.
- Power-down mode current: 4.2uA.
- Sensitivity 2Mbps mode in received: -92dBm.
- Sensitivity 1Mbps mode in received: -95dBm.
- PA gain: 20DbLNA gain: 10Db.
- Sensitivity 250kbps mode in received: -104dBm.
- Operating Range: 1 km
- LNA Noise figure: 2.6 Db.
- Antenna Gain (peak): 2Dbi.
- 2MB rate (Open area): 520m.
- 1MB rate (Open area): 750m.
- 250Kb rate (Open area): 1100m.
- Interface: SPI.
SKU: n/a -
Communication Modules, RF Modules
NRF24L01 Antenna Pair
This is NRF24L01 2.4GHz Antenna Wireless Transceiver Module. The nRF24L01 is a highly integrated, ultra-low power (ULP) 2Mbps RF transceiver IC for the 2.4GHz ISM (Industrial, Scientific, and Medical) band. With peak RX/TX currents lower than 14mA, a sub 26A power down mode, advanced power management, and a 1.9 to 3.6V supply range, the nRF24L01 provides a true ULP solution enabling months to years of battery life when running on coin cells or AA/AAA batteries. These RF modules are very popular among the Arduino tinkerers. The nRF24L01 is used on a wide variety of applications that require wireless control. They are transceivers which this means that each module can transmit and receive data.
SKU: n/a -
Communication Modules, RF Modules
RF 315/433 Transmitter/Receiver Module
Transmitter :
- Working voltage: 3V – 12V for max. power use 12V
- Working current: max Less than 40mA max, and min 9mA
- Resonance mode: (SAW)
- Modulation mode: ASK
- Working frequency: Eve 315MHz Or 433MHz
- Transmission power: 25mW (315MHz at 12V)
- Frequency error: +150kHz (max)
- Velocity: less than 10Kbps
So this module will transmit up to 90m in open area.
Receiver :
- Working voltage: 5.0VDC +0.5V
- Working current: 5.5mA max
- Working method: OOK/ASK
- Working frequency: 315MHz-433.92MHz
- Bandwidth: 2MHz
- Sensitivity: excel 100dBm (50)
- Transmitting velocity: <9.6Kbps (at 315MHz and -95dBm)
SKU: n/a -
Communication Modules, GSM and GPS
Sim 800A GSM
The SIM800A Quad-Band GSM/GPRS Module with RS232 Interface is a complete Quad-band GSM/GPRS solution in an LGA(Land grid array) type which can be embedded in the customer applications. SIM800A support Quad-band 850/900/1800/1900 MHz, it can transmit Voice, SMS and data information with low power consumption
SKU: n/a -
Communication Modules, XBee
XBee Pro 60mW PCB Antenna – Series 1
This is the very popular 2.4GHz XBee XBP24-ACI-001 module from Digi. The Pro series have the same pinout and command set of the basic series with an increase output power of 60mW! These modules take the 802.15.4 and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
SKU: n/a -
Communication Modules, XBee
XBee Pro 60mW Wire Antenna
INTRODUCTION
This is the very popular 2.4GHz XBee XBP24-AWI-001 module from Digi (formerly known as Maxstream). The Pro series have the same pinout and command set of the basic series with an increase output power of 60mW! These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.SKU: WRE675 -
