22mm LED Digital Display Gauge Volt Voltage Meter Indicator

Related products

• Digital Meter, Multi Meters

  Digital Clamp Meter 600A UNI T UT202A+

  

  Digital Meter, Multi Meters

  Digital Clamp Meter 600A UNI T UT202A+

  0 out of 5

  (0)

  1. Current Measurement Range:
     • AC Current: 20A/200A/600A
  2. Voltage Measurement Range:
     • AC Voltage: 2V/20V/200V/600V
     • DC Voltage: 200mV/2V/20V/200V/600V
  3. Resistance Measurement Range: 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ
  4. Frequency Measurement Range: 10Hz/100Hz/1kHz/10kHz/100kHz/1MHz/10MHz
  5. Capacitance Measurement Range: 2nF/20nF/200nF/2μF/20μF/200μF/2mF/20mF
  6. Duty Cycle: 0.1% – 99.9%
  7. Display: Large LCD display with backlight
  8. True RMS Measurement: Provides accurate readings for both sinusoidal and non-sinusoidal waveforms
  9. Non-Contact Voltage (NCV) Detection: Detects the presence of voltage without direct contact for added safety
  10. Data Hold Function: Freezes measurement readings on the display for easy recording
  11. Auto Range and Manual Range: Offers both automatic range selection and manual range selection for flexibility in measurements
  12. Jaw Opening Size: Accommodates conductors up to a certain size for easy clamping
  13. Safety Rating: Complies with international safety standards and may have CAT (Category) or IEC (International Electrotechnical Commission) safety ratings
  14. Power Source: Requires batteries (typically AAA batteries)
  15. Dimensions: Varies depending on the specific model
  16. Weight: Varies depending on the specific model

  SKU: n/a

  ₨ 5,899 ₨ 9,360

  Add to cart

  Compare

  Compare
• Digital Meter, Mega Payday Sale, Multi Meters

  DC Voltmeter 0-30V 7-Segment Display

  

  Digital Meter, Mega Payday Sale, Multi Meters

  DC Voltmeter 0-30V 7-Segment Display

  0 out of 5

  (0)

  Specification

  • Measuring range: DC4.0-30.0V
  • Power supply range: No additional power supply, direct use of the measured voltage as a power supply, the range as above
  • The highest input DC is 30.0V. Note: The input voltage higher than 30V may be permanently damaged! Allowable error  1%; greater than or equal to V, the error is  0.3V; less than V error  0.
  • Input impedance : > 0K ohms
  • Operating current < 23mA
  • Refresh speed: about 300mS time
  • Display mode: three “0.6” LED digital tube
  • Display colour: red
  • Lead length: about cm / 7.7 in
  • Dimensions: about 4 x 2 x mm / 1. x 1.14 x 0.7 in
  • Opening size: about 46 x mm / 1.1 x 1.07 in
  • Net weight: about g
  • Operating temperature: –  ~ 6

  SKU: n/a

  ₨ 199 ₨ 364

  Add to cart

  Compare

  Compare
• Digital Meter, Multi Meters

  Satellite Finder Ws 6933

  

  Digital Meter, Multi Meters

  Satellite Finder Ws 6933

  0 out of 5

  (0)

  Digital Satellite Meter Satlink WS-6933 R10827 allows for the quick setup of satellite dishes.

  Satlink WS-6933 R10827 has a clear menu that will help any installer to do the job quickly and effectively. The device incorporates a list of over ten popular satellites (plus transponders), which can be modified by the user. TheWS-6933 HD model can measure DVB-S2 signals, including HD channels. It comes with a power adapter and USB cable to connect to a PC.

  The level of a signal is given in dBV and its quality as the percentage based on the C/N ratio. These parameters allow for precise alignment of the dish and LNB, as well as for testing signal levels and quality in systems with multi switches and amplifiers.

  A built-in flashlight makes the device even more practical.

  SKU: n/a

  ₨ 16,499 ₨ 26,000

  Add to cart

  Compare

  Compare
• Digital Meter, Multi Meters

  UNI-T UT33D+ Palm Size Digital Multimeter

  

  Digital Meter, Multi Meters

  UNI-T UT33D+ Palm Size Digital Multimeter

  0 out of 5

  (0)

  The new generation UT33+ series redefines the performance standards for entry-level digital multimeters. Our innovative industrial design ensures that these products can withstand 2 meters drop. The new LCD display layout provides a better user experience. This series ensures that users can work safely in CAT II 600V environment. Special features are, 2mF capacitance test (UT33A+); battery test (UT33B+); temperature measurement function (UT33C+); UT33D + for the NCV non-contact with electricity, resistance range up to 200M entry-level digital multimeter; is the electrical priority of the digital multimeter.

  SKU: n/a

  ₨ 2,699 ₨ 3,120

  Add to cart

  Compare

  Compare