Related products
-
BLDC Motor, Motors, Motors & Drivers, Multicopter Accesories
A2212 2200KV Brushless DC Motor BLDC
0 out of 5(0)- Recommended Voltage: 2-12VDC
- Internal Resistance: 90mΩ
- Shaft Size: 3.17mm (1.8″)
- Shaft Length: 11mm
- Motor Diameter: 27.5mm
- Motor Length (Overall): 40mm
- Current Capacity: 12A/60s
- Max Efficiency: 80%
- Max Power: 239W
- Recommended ESC: Minimum Of 18A
- Recommended Model Weight: 300-1000g
- Mounting Holes: M3
- Wire Length: ~70mm
SKU: n/a -
Gear Motor, Motors & Drivers
DC Gear Motor With Encoder (6V 210RPM)
0 out of 5(0)This is 6V DC Motor 10kg-cm 210RPM w/Encoder metal geared DC motor w/Encoder. It is a 6V motor with a 34:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 11 counts per revolution of the motor shaft, which corresponds to 341.2 counts per revolution of the gearbox’s output shaft.
SKU: n/a -
Motor Drivers, Motor Drivers, Motors & Drivers, Robotics
A4988 Stepper driver
0 out of 5(0)- Supply Voltage : 8-35 VDC.
- Current : 1.0A (no heatsink ).
- Current : 2.0A (with heat-sinking).
- logic input : 3 – 5.5V .
- Automatic current decay mode detection/choice.
- Mixed with slow current decay mode.
- The low power dissipation of synchronous rectifier.
- Internal UVLO(ultra voltage lockout).
- Crossover current protection.
- Thermal shutdown circuit.
- Ground fault protection.
- Loading and short circuit protection.
- The optional five-step mode: full, 1/2, 1/4, 1/8 and 1/16.
SKU: n/a -
Arduino & IOT Boards, Module, Motors & Drivers, Stepper Motor
Arduino 28BYJ48 Stepper Motor
0 out of 5(0)Arduino 28BYJ48 Stepper Motor With ULN2003 Driver Board Description: This is 28YBJ-48 DC 5V 4 phase 5 wire stepper motor with ULN2003 driver board5-wire phase can drive ordinary uln2003 chip can also be connected as phase 2 may be supporting the development board, direct plug. Motor: Diameter: 28mmVoltage: 5VStep angle: 5.625 x 1/64Reduction ratio: 1/64ULN2003 driver board: A, B, C, D LED indication Four-phase stepper motor work status Size: 31x35mmPackage included:1 x ULN2003 driver board1 x 28BYJ-48 stepper motor Options:
SKU: n/a
Ultrasonic Mist Maker,12 LED Fogger 1A 24V With Adapter
18 Ohm 1/4Watt Resistor (5% tolerance)
LM386 LM-386 Audio Amplifier Chip
L293D L293-D Dual H-Bridge Motor Driver
8 Pin SIP Resistor 10K
UA723
Circular Magnet Black
L293E Push-Pull Four Channel Drivers
Arduino UNO R3 SMD - Economic WITH CABLE
LR-41 Alkaline Battery Button Cell (1.5V)
GY-291 ADXL345 3-Axis Accelerometer Module
Banana dip female small
JQ Relay 6V (5 Pin)
FTDI FT232 USB UART Board (mini)
BTS 7960 Motor Driver 43A 




There are no reviews yet.