-
×
Arduino MEGA 2560 R3 ATMEGA16U2 Programing Board
1 × ₨ 3,699
Subtotal: ₨ 3,699
-19%
Arduino & IOT Boards, Module
Lillypad
Availability:
Out of stock
LilyPad is a programmable sewable system for creating textile with the help of electronics. The pad is programmed through arduino and used for textile projects using conductive thread.
₨ 760 ₨ 936
Out of stock
Based on 0 reviews
Be the first to review “Lillypad”
Related products
-
Arduino & IOT Boards, Module
LCD I2C Module IIC/I2C Serial Interface Adapter
- Operating Voltage: 5V
- Backlight and Contrast is adjusted by potentiometer
- Serial I2C control of LCD display using PCF8574
- Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable
- Compatible for 16×2 LCD
- This is another great IIC/I2C/TWI/SPI Serial Interface
- With this I2C interface module, you will be able to realize data display via only 2 wires.
SKU: n/a -
Arduino & IOT Boards, Module, Shields
Arduino WiFi Shield CC3000
- Based on TI CC3000 WIFI module.
- Use SPI communication .
- Integrated 3.3V regulator .
- Level shifter integrated .
- Integrated ceramic antenna .
- It has a connector for external antenna WIFI
- Compatible with Arduino UNO, Mega, Leondardo & Micro
- Antenna: Onboard Ceramic
- MicroSD card slot onboard
- Reset button
- Communication Protocol: SPI
- Connects via IEEE 802.11 b/g networks
- Tx Bandwidth: 11Mbps
- Tx Sensitivity: +/-18dBm
- Rx sensitivity: -86dBm
- IRQ pin for interrupts (useful for asynchronous connections)
- Supports WEP, WPA, WPA2, TKIP and AES
- TCP and UDP Client & Server Modes available
- Max Concurrent TCP/UDP Sockets: 4
- TCP/IP stack is built in.
SKU: n/a -
Arduino & IOT Boards, Boards
Digispark – The tiny, Arduino usb dev board
The micro-sized, Arduino enabled, usb development board – cheap enough to leave in any project!
Digispark?is an ATtiny85 based microcontroller development board come with USB interface.?Coding is similar to Arduino, and it use the familiar Arduino IDE for development.
SKU: ARD692 -
Arduino & IOT Boards, Module
Dual-axis XY Joystick Module for Arduino
- Dimensions: 40 x 27 x 15 (LxWxH) mm
- Weight: 10gm (without Hat).
- 2.54mm pin interface leads
- Operating Voltage: 5V.
- Long service life and stable performance
- Standard interface and electronic building blocks
- Widely use in Arduino DIY projects
- Cross rocker as a two-way 10K resistor, with the rocker in a different direction
SKU: n/a
There are no reviews yet.