-
×
Ferric Chloride for PCB Etching
1 × ₨ 199 -
×
Edison Robot Value Pack – 5 Robots + 1 Charger + 1 EdCreate Kit
1 × ₨ 141,999
Subtotal: ₨ 142,198
-28%
Gear Motor, Motors & Drivers, Robotics, Wheels
Motor + Wheel DC Geared 5V
- Continuous Current(A):70mA
- Output Power:-
- Protect Feature: Waterproof
- Type: Gear Motor
- Construction: Permanent Magnet
- Certification: CE
- Torque:5500g*cm
- Speed(RPM):125RPM
- Commutation: Brush
- Voltage(V):3 – 6V
- Efficiency: plastic gear motor
₨ 299 ₨ 416
Motor + Wheel DC Geared 5V
- Continuous Current(A):70mA
- Output Power:-
- Protect Feature: Waterproof
- Type: Gear Motor
- Construction: Permanent Magnet
- Certification: CE
- Torque:5500g*cm
- Speed(RPM):125RPM
- Commutation: Brush
- Voltage(V):3 – 6V
- Efficiency: plastic gear motor
Based on 0 reviews
Be the first to review “Motor + Wheel DC Geared 5V”
Related products
-
Gear Motor, Motors & Drivers
12V DC Motor 350RPM w/Encoder (12kg*cm)
This is a gear motor with encoder. It is a motor with a 34:1 gearbox and an integrated quadrature encoder that provides a resolution of 11 pulse single per round giving a maximum output of 374 within one round. With an Arduino controller and motor driver, applications for this include a closed-loop PID control or PWM motor speed control. This motor is an ideal option for mobile robot projects. The copper output shaft, embedded thread and reinforced connector greatly extends the motor’s service life.
SKU: MOT544 -
Platform Cars, Robotics
Magician Chasis 2WD
The Magician Chassis is our latest robot platform. It features two gearmotors with 65mm wheels and a rear caster. The chassis plates are cut from acrylic with a wide variety of mounting holes for sensors, controllers, power, etc. Simply bolt the two pre-cut platforms together, attach the motors and caster and add your favorite robotics controller.
SKU: n/a -
Motor Drivers, Motor Drivers, Motors & Drivers, Robotics
BTS 7960 Motor Driver 43A
- Double BTS7960 large current (43 A) H bridge driver;
- 5V isolate with MCU, and effectively protect MCU;
- 5V power indicator on board;
- voltage indication of motor driver output end;
- can solder heat sink;
- Just need four lines from MCU to driver module (GND. 5V. PWM1. PWM2);
- isolation chip 5 V power supply (can share with MCU 5 V);
- size: 4 * 5 * 1.2 cm;
SKU: n/a -
Robotics, Wheels
52mm Omnidirectional Wheel (Brass Bearing for Rollers)
52mm Omnidirectional wheel is unique as they are able to roll freely in two directions. It can either roll like a normal wheel or roll laterally using the wheels along its circumference. Omni-direction wheels allow a robot to convert from a non-holonomic to a holonomic robot. A non-holonomic robot that uses normal wheels has only 2 out of 3 controllable degrees of freedom which are, moving forward/backward and rotating. Not being able to move sideways makes a robot slower and less efficient in reaching its given goal. The holonomic Omni-directional wheels are able to overcome this problem, as it is highly maneuverable. Unlike a normal non-holonomic robot, the holonomic Omnidirectional robot can move in an arbitrary direction continuously without changing the direction of the wheels. It can move back and forth, sideways, and rotates at the same position.
SKU: n/a
There are no reviews yet.