Shop
Showing 49–96 of 1338 results
-
Communication Modules, RFID
125KHz EM18 reader module EM-18 build in coil antenna
- Operating voltage of EM-18: +4.5V to +5.5V
- Current consumption:50mA
- Can operate on LOW power
- Operating temperature: 0C to +80C
- Operating frequency:125KHz
- Communication parameter:9600bps
- Reading distance: 10cm, depending on TAG
- Integrated Antenna
SKU: n/a -
Resistors
12K Ohm Resistor 1/4 Watt (5% tolerance)
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
SKU: n/a -
Batteries & Chargers
12V 10A Power Supply Adapter – Refurbished | Reliable DC Power for CCTV, LED, Routers
Batteries & Chargers12V 10A Power Supply Adapter – Refurbished | Reliable DC Power for CCTV, LED, Routers
-
Input: 100-240V AC, 50/60Hz (worldwide use)
-
Output: 12V DC, 10A
-
High efficiency, low energy consumption
-
Overload, overvoltage, and short-circuit protection
-
Sturdy, lightweight design with excellent cooling
-
Plug and play with standard DC connector
SKU: n/a -
-
Adapters/Power Supply Modules, Clearance Sale
12V 2A Power Adapter
- It is a convenient power supply for your devices.
- It is built-in overvoltage, over current and short circuit protection.
- It has a wide voltage function; it conforms to the safety standards.
- Its Pulse Width Modulation design ensures the stability and efficiency of the power supply.
- It has a constant and stable voltage output.
- It provides stable power to your devices.
SKU: n/a -
Relay Modules, Relays & Interface Module
12v 4 Channel IR Infrared Remote Control Switch Relay Module Board Kit
Relay Modules, Relays & Interface Module12v 4 Channel IR Infrared Remote Control Switch Relay Module Board Kit
- Can be high and low bidirectional trigger, support a variety of single-chip, support Arduino.
- Anti-interference ability, the use of diode freewheeling protection.
- Relay contact part of the use of double-sided thick wiring, for large current through, safe and reliable.
- Each relay output is led to normally open and normally closed two groups of electric shock, easy to use and flexible.
- Finished product with 100% functional testing and stability testing.
- Through the MCU control, can achieve external self-locking mode and non-self-locking two ways to trigger the relay.
SKU: n/a -
-
-
Cooling Fan, Motors & Drivers, Peltier & accessories
12V DC Cooling Fan 80mm
12v DC cooling fan 80mm Ideal for compact PC cases (HTPC, ITX, Small Form Factor) and other chassis (intake & exhaust), replacement fan for NAS and other devices, etc. you can order all types of electrical and electronics components at ELECTRONATION.PK
SKU: n/a -
Solenoid Locks and Valves
12V DC Electric Door Lock Fingerprint Door Lock
- Iron Body Material
- High quality ultra-compact electric lock.
- Rustproof, durable, safe, convenient to use.
- Suction which tightly sucks the iron, thus locking the door.
- Applicable for being installed in the escape door or fire door electronic controlled system.
- Adopts the principle of electric magnetism, when the current through the silicon, the electromagnetic lock will achieve a strong.
SKU: n/a -
Cooling Fan, Motors & Drivers, Peltier & accessories
12V DC Fan 3 Inches
- Type: Axial Flow Fan
- Blade Material: Plastic
- Bearing Type: Ball/hyper bearing
- Bearing system type: Ball/Hydraulic bearing
- Rated voltage: 5V/12V/24V/48V
- Rated speed: 2000/2500/3000/3500/4000/5000RPM
- Maximum airflow: 26.13/33.02/38.10/43.90/49.50/63.50CFM
- Maximum pressure(mmH2O): 1.75/2.65/3.38/4.85/6.58/9.40mmH2O
- Maxima noise(dBA): 22.1/26.7/30.9/37.2/40.9/42.0dBA
- Function: by impedance, by IC, by IC with FG
- Safety approvals: CE, TUV, UL
- Lead wire: UL Type (+): Red wire ; (-): Black wire. This is a two-wire cooling fan
- Bearing Type: Dual Ball Bearings
- Life: Working up to 50000h at 25 degrees.
- Applications: Server cabinet, UPS power, computer, CPU, etc.
- Check the voltage whether fit your need. power the fan with corresponding voltage.
- Make sure the + (RED wire) and Black wire are connected to power correctly.
- 1 x 3 Inches12V DC Fan
SKU: n/a -
LED Lights & Bulbs
12V DC LED Lamp Shade
Introducing the 12V DC LED with 60-SMD LED chips, this high-quality lighting solution offers efficient illumination with a power consumption of 24W. Designed for both indoor and outdoor use, it provides a versatile lighting option for various applications. With its built-in heat sink, it effectively dissipates heat without requiring additional cooling measures. It can be directly powered by any 12V battery, solar panel, or a 12V 2A power adapter, making it compatible with a wide range of power sources. Upgrade your lighting setup with the 12V DC LED and enjoy reliable and energy-efficient illumination in Pakistan. Available on Electronation Pakistan.
SKU: n/a -
Gear Motor, Motors & Drivers
12V DC Motor 350RPM w/Encoder (12kg*cm)
This is a gear motor with encoder. It is a motor with a 34:1 gearbox and an integrated quadrature encoder that provides a resolution of 11 pulse single per round giving a maximum output of 374 within one round. With an Arduino controller and motor driver, applications for this include a closed-loop PID control or PWM motor speed control. This motor is an ideal option for mobile robot projects. The copper output shaft, embedded thread and reinforced connector greatly extends the motor’s service life.
SKU: MOT544 -
Solenoid Locks and Valves
12V DC Water/Gas Flow Solenoid Valve Normally Closed
- Voltage: 12V DC.
- Valve type: diaphragm (Operated by Servo).
- Mode of operation: Normally closed.
- Fluid temperature: 1-100 ℃.
- Size: 8.5cm x 6cm x 4.3cm.
- 1/2″ Nominal NPS
- Working Pressure: 0.02 Mpa – 0.8 Mpa
- Working Temperature: 1 ℃ – 75 ℃
- Response time (open): ≤ 0.15 sec
- Response time (close): ≤ 0.3 sec
- Actuating voltage: 12VDC (but we found it would work down to 6V)
- Actuating life: ≥ 50 million cycles
- Weight: 4.3 oz
- Rated Power: 5W
SKU: n/a -
LED Lights & Bulbs
12v LED round strip 18W
Introducing the 12V LED Round Strip with an 18W aluminum board, this versatile lighting solution is perfect for ceiling lights, downlights, spotlights, and more. With its high-power LED design, it delivers bright illumination while consuming minimal power. The LED’s low heat generation ensures safe and efficient operation, making it suitable for prolonged use.
Featuring a low power consumption and high brightness, this LED strip is an energy-efficient choice for indoor lighting applications. Whether you need to illuminate a room, highlight specific areas, or create a cozy ambiance, this LED strip provides reliable and vibrant lighting.
Please note that during operation, it is important to have a cooling module in place to dissipate any heat generated by the LED strip. This ensures optimal performance and extends the lifespan of the LEDs.
Upgrade your lighting setup with the 12V LED Round Strip and enjoy efficient, long-lasting illumination for your ceiling lights, downlights, spotlights, and more. Perfect for both residential and commercial environments, this LED strip is an excellent choice for indoor lighting needs.
SKU: n/a -
Electrical Equipment, Panel Lights and Buttons
12V Panel Light 16mm
12V Panel Light 16mm LED indicators using multi-chip technology provides you with bright and even colour at lower power consumption. Even better is the quick and easy installation with a back of panel lock nut and captive screw terminals. You are offered a voltage range of 12V to 230V and a choice of colours, red, green, yellow, blue and white. This range of LED indicators is rated IP40 and have an operational life of 30,000 hours.
SKU: n/a -
Accessories, Batteries & Chargers
12V Spot Welder Set Portable Battery Spot Welding Storage Machine
- Material: PCB
- Suitable for: 18650/26650/32650 lipo battery
- System voltage: 12-V-14.6V
- Working current: 90-150A
- Suggested battery: (not included)
- 20-45ah Lead-acid battery with fine performance and small internal resistance
- 3.5-5.5ah 45C 3S aeromodel lithium battery pack
- 30-35ah capacity 18650 battery pack
- Package size: 190 * 110 * 30mm / 7.5 * 4.3 * 1.2in
- Package weight: 110g / 3.9ounce
SKU: n/a -
Resistors
130 Ohm 1/4Watt Resistor (5% tolerance)
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
SKU: n/a -
Batteries & Chargers, Battery Management System (BMS)
13S 30A 48V Li-ion Battery Protection Board BMS
Batteries & Chargers, Battery Management System (BMS)13S 30A 48V Li-ion Battery Protection Board BMS
-
Battery Type: Lithium-ion (3.7V cells)
-
Battery Configuration: 13S (13 cells in series)
-
Nominal Voltage: 48V
-
Max Input Charging Voltage: 54.6V
-
Input Charging Current: 30A
-
Output Discharging Current: 30A
-
Cell Type: 18650 or similar Li-ion cells
-
Operating Temperature: -40°C to +125°C
-
Board Type: Charging and Protection PCB with Balance
SKU: n/a -
-
Batteries & Chargers, Battery Management System (BMS)
13S 48V 60A Li‑Ion Battery Protection & Equalizer BMS – High‑Power 60 A Board
Batteries & Chargers, Battery Management System (BMS)13S 48V 60A Li‑Ion Battery Protection & Equalizer BMS – High‑Power 60 A Board
-
Cell Configuration: 13S (13 cells in series)
-
Nominal Voltage: 48 V
-
Continuous Discharge: 60 A
-
Protection Types: Overcharge, Over-discharge, Overcurrent, Short circuit
-
Balance Feature: Equalizer board keeps cells in sync
-
Waterproof & Durable: Dust/shock resistant
-
Size & Weight: ~70 × 56 × 9 mm, ~60 g
SKU: n/a -
-
IC Base, ICs
14 Pin – DIP IC Socket/Base
14 Pin – DIP IC Socket/Base IC sockets are generally for preventing damage to IC’s from soldering and while testing multiple circuits. These are made from Black Thermoplastic and tin-plated alloy contacts. One end is notched to aid in identification. They can be mounted end to end to suit longer IC’s.
SKU: n/a -
Resistors
15 Ohm 1/4 Watt Resistor (5% tolerance)
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
SKU: n/a -
Resistors
150 Ohm 1/4Watt Resistor (5% tolerance)
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
SKU: n/a -
-
Adapters/Power Supply Modules
1500W 30A CONVERTER STEP UP POWER SUPPLY MODULE
When using the boost power supply should pay attention to the following points:
1. the output polarity cannot be reversed or short circuit.
2. when using batteries as the input source, you must lower the battery protection, otherwise it will damage the battery and power supply
3. Input power supply voltage must be above 10V.
4. When the power supply is used for the input power supply, the input power and the output voltage of the input power supply are the first to be unloaded. Then pick up the load. (must ensure that the switching power supply has been working).
5. When the constant current mode is used to set the voltage, the constant voltage must be higher than the input voltage.Do not use the way of short circuit output current,the circuit structure of the boost module can not be adjusted in short circuit way.
6. If the input voltage fluctuation range is lower than the set output voltage,then the output voltage is constant, it is to ensure that input is lower than the output voltage.
SKU: n/a -
Resistors
150K Ohm Resistor 1/4 Watt (5% tolerance)
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistors resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and cant generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
SKU: n/a -
Heaters, Incubator
150W Ceramic Heater Heat Emitter Lamp Incubator
This 150w Ceramic Heater Poultry Warmer emitter bulb is the perfect 24-hour heat source for all reptiles. These porcelain heating devices screw into a standard porcelain incandescent socket, giving off intense muscle-penetrating infrared heat while emitting no light. The flat-faced design is more efficient and longer-lasting than conical designs which build up excess heat internally ultimately carbonizing the element.
SKU: n/a -
Adapters/Power Supply Modules
150w Dc To Dc Boost Converter 10 32v To 12 35v 6a Step Up Power Supply Module
Adapters/Power Supply Modules150w Dc To Dc Boost Converter 10 32v To 12 35v 6a Step Up Power Supply Module
- Input Voltage: 10v – 32v DC
- Output Voltage: 12v – 35v DC
- Output Current: 6A MAX
- Input Current: 10A (MAX)
- Output Ripple: 2% MAX
- Working Temperature: Industrial – 40C to +85C (Environmental temperature, more than 40C, reduce load wattage or enhance cooling)
- Full-Load temperature: 45 degrees.
- No-load current: 25mA typical.
- Voltage regulation: ± 0.5%.
- Load regulation: ± 0.5%.
- Dynamic response speed: 200uS 5%.
- Short circuit protection: None (Please Install fuses and protection circuits at the Input port.)
- Input Reverse Polarity Protection: None (Please Series diode at the input port.)
- Size: 2.60 in (L), 1.85 in (W) , 1.1 in (H)
- Weight: 2.30 oz (66 g)
SKU: n/a -
-
Resistors
15K Ohm Resistor 1/4 Watt (5% tolerance)
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
SKU: n/a -
Module, Relay Modules, Relay Modules, Relays & Interface Module
16 Channel Relay Module
- Product Name: 16-Channel Relay Module
- Number of Channels: 16
- Control Signal voltage: 5V, active low
- Load Voltage: AC 250V/10A, AC 125V/15A
- DC 30V 10A
- Input power: 12V
- Each board needs 15-20mA Driver Current
- I / O port driver is active in low level.
- 1-16 channel optionally fully open/closed,
- or any channel.
- Standard interface that can be controlled directly by microcontroller
- Indication LEDs for Relay output status.
- Independent common end COM makes the relay convenient for users to access different signals.
- Use optocoupler protection with high safety performance
- Widely used for all MCU control, industrial sector, PLC control, smart home control.
- Size: 8 x 5.7 x 1.2 inches
- Weight: 8.8 ounces
SKU: n/a -
-
Bread Board, circuit boards
1660 Point Bread Board
A breadboard is referred to a solder-less breadboard. These are great units for making temporary circuits and prototyping, and they require absolutely no soldering. You just need to place the component on the breadboard equipped with a power source.
SKU: n/a -
-
-
Resistors
18 Ohm 1/4Watt Resistor (5% tolerance)
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
SKU: n/a -
Batteries & Chargers, Holders
18650 Battery NCR 1 Cell Holder
- Material: Plastic and metal.
- Output Voltage: 3.7v
- Colour: Black.
- Weight: 10g.
- Wire Lenght: 6″
- Dimension (Appro.): 76x20x20xmm
- Takes 1 standard size 18650 batteries side by side to form a compact battery of 3.7V using alkaline batteries.
SKU: n/a -
Batteries & Chargers
18650 Universal 1 slot Battery USB Charger adapter
- Product name: 18650 charger-single slot independent charging
- Product model: BH-042100-02U with wire
- Functional characteristics: single-slot independent charging
- Power supply mode: conventional USB power supply
- Input mode: DC 5V 1A-2A
- Output mode: DC 4.2V 1000mA
- Product size: 10*22*27mm
- Product certification: EU CE/EMC certification, US FCC certification
SKU: n/a -
Batteries & Chargers
18650 Used Battery Cell
- Capacity (Ah): 2Ah – 3Ah ( 2000mAh – 3000mah)
- Charging Voltage (V): 4.2 V
- Energy (Wh): 12.2 Wh
- Energy Density (Wh/L): 730 Wh/L
- Nominal Voltage (V): 3.6V-3.7V
- Weight (g): 46 g
- Diameter (mm): 18.06 mm (+/- 0.03 mm)
- Height (mm): 65 mm (+/- 0.03 mm)
- Max. Discharge rate: C Rating 2C (Maximum recommended current 6.8A)
- Top (positive side): Flat top
- Model: NCR18650B
- Made in Japan
SKU: n/a
