Shop
Showing 449–464 of 1338 results
-
ICs
Atmel Attiny85 Attiny-85 ATtiny85-20PU
Features of ATtiny85 Microcontroller:-
- Flash (Kbytes): 8 Kbytes
- Pin Count: 8
- Max. Operating Freq. (MHz): 20 MHz
- CPU: 8-bit AVR
- Number of Touch Channels: 3
- Hardware QTouch Acquisition: No
- Max I/O Pins: 6
- Ext Interrupts: 6
- USB Interface:No
- Package – SMD
SKU: n/a -
Arduino & IOT Boards, Light, Sensors
Automatic Photocell Street Light Sun Switch Sensor 12V or 220V
- Its color is white and blue.
- Its size is 5 x 4.2 x 3.3 cm.
- Its input voltages are AC 220V or DC 12V.
- Its maximum load current is 10A.
- Its frequency range is 50 to 60 Hz.
- It is widely used in street lighting, highways, factories, gardens, ports, airports, farms, parks, schools, and other places.
SKU: n/a -
-
AVR/Atmel, Development Boards
AVR C51 Development Board
Support for 51 series microcontroller STC89C52, STC12C5A60S2, AT89C51, AT89C52, AT89S51, AT89S52 most commonly used. In addition, to support the other 40 feet of the 51 series microcontroller and the ATmega16! STC89C52, STC12C5A60S2 can serial direct download program for, AT89S series microcontroller needs need specialized programming download program with USBISP a download manager program, AT89C series microcontroller. The ATmega16 use need to use an adapter plate, the download program needs USBISP Downloader!
SKU: n/a -
Battery Testers, Testers
Battery Capacity Indicator DC 8V-100V Voltmeter Voltage Gauge 12V 24V 48V 72V
Battery Testers, TestersBattery Capacity Indicator DC 8V-100V Voltmeter Voltage Gauge 12V 24V 48V 72V
- Item Type: Battery Monitor
- Material: ABS
- Display Color: Colored
- Voltage Measurement Range: DC8-80V
- Measurement Accuracy: 1% ± 1 word.
- Display: LCD screen
- Measurement Speed: about 2 times per second.
- Dimensions: Approx. 6.5 x 3.5 x 1.5cm / 2.6×1.4×0.6in
- Installation Size: Approx .58 x 28mm / 2.3×1.1in
- Lead Length: 20cm / 7.9in
SKU: n/a -
Batteries & Chargers, Battery Testers
Battery Meter Checker Tester -7 Cell Capacity
Digital Battery Capacity Checker Cellmeter 7
Compatible device: NiCd, NiMH, LiPo, LiFe, Li-ion
Use for LiPo LiFe Li-ion NiMH Nicd battery
Applies to check the batteries
2.1″ screen display
Battery Type: NiCd /NIMH, Li-Po, LiFe, Li-Ion
Cell number: NiCd/NIMH(4-7 Cells),Lithium type(2-7 Cells)
Display Mode: Battery cell voltages, total voltages, lowest cell voltage, Highest cell voltage gap between highest cell voltage and lowest cell voltage, Remaining battery capacity(%)SKU: n/a -
Batteries & Chargers, Battery Management System (BMS)
Battery Protection Board 2s 8a Bms For 18650 Lithium Ion Cells Hx-2s-jh10
Batteries & Chargers, Battery Management System (BMS)Battery Protection Board 2s 8a Bms For 18650 Lithium Ion Cells Hx-2s-jh10
- Model: HX-2S-JH10
- Size: 40*17*3.5mm
- Over-discharge voltage range: 2.5-3.0v±0.05v
- Overcharge voltage range: 4.25-4.35v±0.05v
- Upper limit working current: 8A
- Upper limit instantaneous current: 10A
- Working temperature: -40— 50 °C
- Storage conditions: -40– 80 ° C
- Quiescent current: less than 10uA
- Effective life: more than 50,000 hours
- Internal resistance: less than 300mΩ
- Charging voltage: 8.4V-9V
- Short circuit protection: protection, disconnect load delay self-recovery Solder join
SKU: n/a -
Optical Sensors/Photo Transistors
Baumer O300-GR (11110414) Diffuse Photoelectric Sensor
Baumer O300-GR (11110414) diffuse photoelectric sensor offering reliable non-contact object detection, high precision sensing, and stable performance for industrial automation, material handling, and manufacturing systems.
SKU: n/a -
Veroboard Vero Board Single Side Large Breadboard Style
CW2000 Nickel Conductive Pen | CircuitWorks / Chemtronics – 9 g (0.32 oz) – Trace Repair & Prototyping
Screwdriver Shovel STANLEY 60004S
7 Cell Power Bank Case
Camera Module 5MP Pi3 Model B Rev 1.3 with Cable
MT3608 Step-Up Adjustable DC-DC Switching Boost Converter 












