Motors & Drivers
Showing 25–45 of 45 results
-
Motor Drivers, Motors & Drivers
DRV8825 Stepper Motor Driver with Heat Sink | High-Precision Stepper Control for 3D Printers & CNC
Motor Drivers, Motors & DriversDRV8825 Stepper Motor Driver with Heat Sink | High-Precision Stepper Control for 3D Printers & CNC
- Model: DRV8825
- Supply Voltage: 8.2 – 42 VDC.
- Current Capacity : 2.2A max(24V).
- Continuous current per phase: 1.5 A.
- Minimum Logic voltage: 2.5V.
- Maximum Logic Voltage: 5V.
- Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32.
- Dimensions : 15 x 20 mm.
- Weight: 4 gm.
SKU: n/a -
Motor Drivers, Motor Drivers, Motors & Drivers, Robotics
L298-Mini
1.Module supply voltage: DC 2V-10V
2.Signal input voltage: DC 1.8-7V
3.Single working current: 1.5A
4.Peak current up to 2.5A
5.Low standby current (less than 0.1uA)
6.Built-in common conduction circuit, the input terminal vacant, the motor does not malfunction
7.Size: 24.7 x 21 x 7mm
8.Mounting hole diameter: 2 mmSKU: n/a -
Gear Motor
Metal DC Geared Motor w/Encoder – 12V 251RPM 18Kg.cm
This is a Gear Motor w/Encoder, model No.GB37Y3530-12V-251R. It is a powerful 12V motor with a 43.8:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 16 counts per revolution of the motor shaft, which corresponds to 700 counts per revolution of the gearboxs output shaft.These units have a 0.61″ long, 6 mm(0.24″)-diameter D- shaped output shaft. This motor is intended for use at 12V, though the motor can begin rotating at voltages as low as 1V.The face plate has six mounting holes evenly spaced around the outer edge threaded for M3 screws. These mounting holes form a regular hexagon and the centers of neighboring holes are 15.5 mm(0.61″) apart.This motor is an ideal option for your mobile robot project.Warning: Do not screw too far into the mounting holes as the screws can hit the gears. Manufacturer recommends screwing no further than 3mm (1/8″) into the screw hole.SKU: MOT258 -
Clearance Sale, Motors & Drivers, Servo Motor
MG90S Metal Gear Micro Servo Motor
- Weight 9 grams.
- Dimension: 22.2 x 11.8 x 31 mm approx
- Stall torque: 1.8 kgf·cm.
- Operating speed: 0.1 s/60 degree.
- Operating voltage: 4.8 V (~5V)
- Working Torque: 2kg/Cm Reaction Speed: 0.11 Seconds / 60 Degrees (4.8v)
- Operating Temperature: 0 -55 The Deadband Setting: 5 Microseconds Plug Type: Jr, Futaba General Rotation Angle: 180 Degrees
- Servo: Analog Servo Operating Voltage: 4.8v Structural Material: Copper Metal Teeth, Coreless Motor, Double Ball Bearing
SKU: n/a -
Gear Motor, Motors & Drivers
Mini Metal Gear Motor (6V 60RPM)
6V 60Rpm Geared DC Motor is a mini geared motor with high torque capability despite its small size and because of that it is very suitable for small sized projects that require high torque such as sumo robots. The motor runs at 60rpm at 6V. It is suggested not to run the motor at voltages higher than 6V.
SKU: n/a -
Motor Drivers, Motors & Drivers
MONSTER MOTO SHIELD DUAL VNH2SP30 16V 30A
- Power supply: Max 16V
- Max current rating: 16A
- Practical Continuous Current: 14A
- Current sensing available to Arduino analog pin
- MOSFET on-resistance: 19 m OHM (per leg)
- Maximum PWM frequency: 20kHz
- Thermal Shutdown
- Under-voltage and Over-voltage shutdown.
SKU: n/a -
Gear Motor, Motors & Drivers, Robotics, Wheels
Motor + Wheel DC Geared 5V
- Continuous Current(A):70mA
- Output Power:-
- Protect Feature: Waterproof
- Type: Gear Motor
- Construction: Permanent Magnet
- Certification: CE
- Torque:5500g*cm
- Speed(RPM):125RPM
- Commutation: Brush
- Voltage(V):3 – 6V
- Efficiency: plastic gear motor
SKU: n/a -
-
Motors & Drivers, Stepper Motor
PM35S-048 Stepper Motor
This is high torque compact 2-2 PHASE stepper motor with 48 steps per revolution with working voltage 24v 600ma. It has enough torque to move small robots and the motor comes with gear shaft attached.
Usage/Applications
- OA Equipment : Printers / Scanners
- Industrial equipment: Flow control valves
- Automotive : Maters / Optic axis control device
- Home automation appliances like Sewing machines
SKU: n/a -
Motors & Drivers, Servo Motor
Power HD LF20MG Servo – 20Kg-cm (277.75 oz-in), 0.16sec – High Voltage
- Supply voltage: from 4.8 V to 6.6 V
- Range of motion: from 0°to 180°
- Type: digital
- Servo has aluminum cogs and ball bearings
- Control signal: up to 1520 μs / 333 Hz
- Dimensions:40,7 x 20,5 x 39,5mm
- Weight: 60 g
- Parameters for 4.8 V:
- Torque: 16.5 kg*cm (1,61 Nm)
- Speed: 0,18 sec/60°
- Parameters for 6.6 V:
- Torque: 20.0 kg*cm (1.96 Nm)
- Speed: 0.16 s/60°
SKU: n/a -
Servo Motor
Sg90 Servo Mounting Bracket
- -Perfect fit for SG90 servos
- -With extension holes for sensors can install a Bracket for sensors
- -Material: Nylon
- -2 Axis servo bracket
- -You need to assemble the parts by yourself
- -Pan / Tilt PT camera platform mount anti-vibration camera for FPV aircraft
- -Dual axis platform 20g suitable for 9g servos. 12g precision and great appearance no shaking with a servo wire clamp.
- -or horizontal direction I recommend MD260 260-degrees metal digital servo wide angle to see more for the perpendicular direction you can use ordinary ES08A plastic servo control chip.
SKU: n/a -
Motors & Drivers, Stepper Motor
Stepper Motor NEMA 17 Refurbish
- Stepper motor is known by its property to convert a train of input pulses into a precisely defined increment in the shaft position.
- This is a high-quality motor that can be used for a long time without stuck.
- It has a quite stable performance during work and will not lose step.
- Low noise and big torque, this is a great choice if you need a stepper motor.
- Stepper motor can be widely used for a 3D printer, CNC engraving machine, etc.
SKU: n/a -
Motor Drivers, Motors & Drivers
Tb6560 3a Stepper Motor Driver Module Cnc Single Axis Controller Module
Motor Drivers, Motors & DriversTb6560 3a Stepper Motor Driver Module Cnc Single Axis Controller Module
- Low cost and good high-speed torque
- Supply voltage up to +32 VDC
- Output current up to 3.0A
- Pulse frequency up to 20 KHz
- Suitable for 2-phase and 4-phase motors
- Over-voltage and short-circuit protection
- 7 output current choices, max 3200 steps/rev
- Automatic idle-current reduction
- Slim size (96x61x37mm)
SKU: n/a -
Motor Drivers, Motors & Drivers
TB6600 Arduino Stepper Motor Driver 4A, 5A
- This stepper motor driver supports 8 kinds of current control.
- This stepper driver supports 7 kinds of micro-steps adjustable.
- Stepper motor driver interface adopts high-speed optocoupler isolation.
- It has the feature of automatic semi-flow to reduce heat.
- It has a large area heat sink.
- It has anti-high-frequency interference ability.
- It has input anti-reverse protection
- It has the feature of overheating, over-current, and short circuit protection.
SKU: n/a -
Motors & Drivers, Servo Motor
Tower Pro MG-945 Digital High-Speed Servo
- Weight: 55g
- Dimensions: 40.7 x 19.7 x 42.9 mm
- Torque: 10kg/cm (4.8V), 12kg/cm (6.6V)
- Operating Voltage: 4.8V – 6.6V
- Speed: 0.23 sec/60°
- Temperature Range: 0°C to 55°C
- Material: High-strength metal gears
- Connector Type: “S” type (compatible with Futaba, JR, Hitec, GWS, and more)
- Idle Current Draw: 10mA
- No-load Current Draw: 170mA
- Stalled Current Draw: 1200mA
- Wire Length: 32cm
- Dead Bandwidth: 1 microsecond
SKU: n/a -
Motors & Drivers, Servo Motor
Tower Pro MG996R Metal Gear High Torque Servo Motor 180 & 360 Deg
- The operating Voltage is +5V typically
- Current: 2.5A (6V)
- Stall Torque: 9.4 kg/cm (at 4.8V)
- Maximum Stall Torque: 11 kg/cm (6V)
- Operating speed is 0.17 s/60
- Gear Type: Metal
- Rotation : 0-180 or 0 to 360
- Weight of motor: 55gm
- Package includes gear horns and screws
SKU: n/a -
Servo Motor
TowerPro MG995 Plastic Gear Servo Motor
MG995 MG-995 Metal Gear Servo Motor Tower Pro-360 Degree comes complete with 30cm wire and 3 pins S type female header connector that fits most receivers, including Futaba, JR, GWS, Cirrus, Blue Bird, Blue Arrow, Corona, Berg, Spektrum, and Hitec. This high-speed standard servo can rotate approximately 360 degrees (60 in each direction). You can use any servo code, hardware, or library to control these servos, so its great for beginners who want to make stuff move without building a motor controller with feedback & gearbox, especially since it will fit in small places. The MG995 Metal Gear Servo also comes with a selection of arms and hardware to get you set up nice and fast.
SKU: MOT489 -
-
Motor Drivers, Motors & Drivers
ULN2003 Stepper Driver 5V
This is ULN2003 Driver Module Stepper Motor Driver, small size and easy to use. It uses the ULN2003 driver chip to amplify the control signal from the Arduino. This Ultra Lightweight and cheap option commonly used to run and control the small applications stepper motors.
SKU: n/a
