-
×
EdCreate Edison robot creator's kit
1 × ₨ 7,499
Subtotal: ₨ 7,499
Robotics
Showing all 24 results
-
-
Platform Cars, Robotics
2WD Robo Chassis
- Mechanical structure, easy to install.
- This car has tachometer encoder
- With 4 cell AA battery holder and power switch.
- Can be used for distance measurement, velocity.
- Can use with other devices to realize the function of tracing, obstacle avoidance, distance testing, speed testing, wireless remote control.
- Gear Motor reduction radio: 1:48.
- Size: 22cm x 14.7cm, wheel size: 7cm x 7cm x 2.6cm.
- Note: motor power supply is 3V~6V.
SKU: ROB007 -
Platform Cars, Robotics
4WD Robo Chasis
Features:
– Simple mechanical structure, easy for installation.
– Adopts 4 decelerate DC motors, ensuring flexbility and good direction.
– Large and stable Chassis, easy for expansion.
– speed test encoding disk.
– recommend use L293D 4 motors driver board and 4 Channel Infrared Detector Tracked Photoelectricity Sensor Obstacle AvoidanceSKU: ROB109 -
Robotics, Wheels
52mm Omnidirectional Wheel (Brass Bearing for Rollers)
52mm Omnidirectional wheel is unique as they are able to roll freely in two directions. It can either roll like a normal wheel or roll laterally using the wheels along its circumference. Omni-direction wheels allow a robot to convert from a non-holonomic to a holonomic robot. A non-holonomic robot that uses normal wheels has only 2 out of 3 controllable degrees of freedom which are, moving forward/backward and rotating. Not being able to move sideways makes a robot slower and less efficient in reaching its given goal. The holonomic Omni-directional wheels are able to overcome this problem, as it is highly maneuverable. Unlike a normal non-holonomic robot, the holonomic Omnidirectional robot can move in an arbitrary direction continuously without changing the direction of the wheels. It can move back and forth, sideways, and rotates at the same position.
SKU: n/a -
Arms/Grippers/Bipped, Robotics
6DOF Biped Robot
his 6DOF Biped robot is a professional small humanoid robot consist of full aluminium parts, special non-ferrous oxidation process on surface, smooth edges not hurting hands, the metal is unbleached, beautiful and durable, prevent decoloring for long time using.
The robot you can mount six micro servos, each foot is 3DOF, the robot can both walk forward or backward and crouch, stand up, turn, even can do a lot of forward roll and backward roll.The kit includes six TowerPro MG995 servos.
SKU: ROB608 -
Arms/Grippers/Bipped, Robotics
6Legs Robotic Kit
This Robot is made of 18 SG90 Servo Motors
To make this robot move, we just need the control software and the following components:
1.6 Legs 18 DOF Robot Black Spider Robot 18pcs SG90 Servo Motor
2.32 Channels Servo Motor Controller Robot Contorller Servo Driver
3.7.4V power supplySKU: ROB640 -
Motor Drivers, Motor Drivers, Motors & Drivers, Robotics
A4988 Stepper driver
- Supply Voltage : 8-35 VDC.
- Current : 1.0A (no heatsink ).
- Current : 2.0A (with heat-sinking).
- logic input : 3 – 5.5V .
- Automatic current decay mode detection/choice.
- Mixed with slow current decay mode.
- The low power dissipation of synchronous rectifier.
- Internal UVLO(ultra voltage lockout).
- Crossover current protection.
- Thermal shutdown circuit.
- Ground fault protection.
- Loading and short circuit protection.
- The optional five-step mode: full, 1/2, 1/4, 1/8 and 1/16.
SKU: n/a -
Motor Drivers, Motor Drivers, Motors & Drivers, Robotics
BTS 7960 Motor Driver 43A
- Double BTS7960 large current (43 A) H bridge driver;
- 5V isolate with MCU, and effectively protect MCU;
- 5V power indicator on board;
- voltage indication of motor driver output end;
- can solder heat sink;
- Just need four lines from MCU to driver module (GND. 5V. PWM1. PWM2);
- isolation chip 5 V power supply (can share with MCU 5 V);
- size: 4 * 5 * 1.2 cm;
SKU: n/a -
DIY Kits, Edison, Robotics
EdCharger – Charging & Storage Solution for Edison V3 Robots
-
Product Name: EdCharger – Charging & Storage for Edison V3 Robots
-
Compatibility: Edison V3 robot only (not compatible with earlier versions)
-
Charging Capacity: Up to 5 Edison V3 robots simultaneously
-
Power Input: USB-A (not included)
-
Minimum Power Requirement: 1 Amp (5 watts)
-
Dimensions: 24.2 cm (L) x 5 cm (W) x 9.5 cm (H)
-
Weight: Lightweight and portable (exact weight not specified by manufacturer)
-
Material: Durable, classroom-safe plastic (assumed standard educational-grade)
-
Use Case: Charging and storage solution for education, robotics labs, and STEM programs
-
Color: Typically orange and black (standard Edison robot color scheme; may vary)
-
Included in Box: 1 x EdCharger unit (USB power source not included)
SKU: n/a -
-
DIY Kits, Edison, Mega Payday Sale, Robotics
Edison Robot Kit
Get started on your EdVenture into coding and robotics with the EdPack1, which includes 1 Edison robot.
Each Edison robot comes with an internal rechargeable battery and an attached USB cable for both programming and charging your robot.
What’s included in the box?
1 x Edison robot with internal rechargeable battery
3 x skids (1 x attached to the robot, 2 x spare skids located in the packaging)
2 x wheels (attached)
2 x tyres (attached)SKU: n/a -
-
-
Motor Drivers, Motor Drivers, Motors & Drivers, Robotics
L298-Mini
1.Module supply voltage: DC 2V-10V
2.Signal input voltage: DC 1.8-7V
3.Single working current: 1.5A
4.Peak current up to 2.5A
5.Low standby current (less than 0.1uA)
6.Built-in common conduction circuit, the input terminal vacant, the motor does not malfunction
7.Size: 24.7 x 21 x 7mm
8.Mounting hole diameter: 2 mmSKU: n/a -
Platform Cars, Robotics
Magician Chasis 2WD
The Magician Chassis is our latest robot platform. It features two gearmotors with 65mm wheels and a rear caster. The chassis plates are cut from acrylic with a wide variety of mounting holes for sensors, controllers, power, etc. Simply bolt the two pre-cut platforms together, attach the motors and caster and add your favorite robotics controller.
SKU: n/a -
Gear Motor, Motors & Drivers, Robotics, Wheels
Motor + Wheel DC Geared 5V
- Continuous Current(A):70mA
- Output Power:-
- Protect Feature: Waterproof
- Type: Gear Motor
- Construction: Permanent Magnet
- Certification: CE
- Torque:5500g*cm
- Speed(RPM):125RPM
- Commutation: Brush
- Voltage(V):3 – 6V
- Efficiency: plastic gear motor
SKU: n/a -
-
-
Robotics, Wheels
Scaffolding Wheel Caster
A caster is a wheeled device typically mounted to a larger object that enables relatively easy rolling movement of the object. Casters are essentially housings, that include a wheel and a mounting to install the caster to objects (equipment, apparatus and more). Casters are found virtually everywhere, from office desk chairs to shipyards, and from hospital beds to automotive factories.
SKU: n/a -
Arms/Grippers/Bipped, Robotics
Standard Gripper Kit B – Straight Mount
This is the Standard Gripper Kit B, a simple and durable robotics kit that is great for getting a grip on pretty much any robotics project! Designed for use with any standard size Hitec or Futaba servo, the gripper kit is easy to assemble and requires only a Phillips Head Screwdriver. This Standard Gripper is capable of opening an impressive 6″ wide max, has an overall body length of 5″ long with a 1.3″ wide servo housing body, and offers 6-32 mounting thru-holes along the edges of the servo housing.
SKU: n/a
