-
×
Keypad 3x4
1 × ₨ 145
Subtotal: ₨ 145
-19%
Arduino & IOT Boards, Module
Lillypad
Availability:
Out of stock
LilyPad is a programmable sewable system for creating textile with the help of electronics. The pad is programmed through arduino and used for textile projects using conductive thread.
₨ 760 ₨ 936
Out of stock
Based on 0 reviews
Be the first to review “Lillypad”
Related products
-
Arduino & IOT Boards, Kits
Arduino Starter Kit RFID Based
Arduino Starter Kit RFID Based walks you through the basics of using the Arduino & RFID in a hands-on way. You’ll learn through building several creative projects. The kit includes a selection of the most common and useful electronic components with a book of 15 projects. Starting from the basics of electronics to more complex projects, the kit will help you control the physical world with sensors and actuators.
This kit aims to bring Arduino together with RFID technology, which will support individual production. With this kit, you will be able to use RFID with the code you wrote in Arduino. You will be able to come up with a practical technology such as Arduino, a technology that many people like RFID are trying to get into and stay away from using. All of the components and components required for RFID technology are combined in this kit.
Radio Frequency Identification (RFID) is the given name to the technology used to identify objects using radio waves. An RFID microchip embedded in a tag, keychain or card communicates with the reader/writer module to transfer data.
SKU: 167 -
Arduino & IOT Boards, Module
Rotary Encoder Module
- Working voltage: 5V
- Pulses per 360-degree revolution: 20
- Push button shaft On/Off switch
- Threaded shaft for panel mounting, also 2 mounting screw holes on the circuit board
- Standard “D” shaft, you can purchase knobs to give it a finished look
SKU: n/a -
Arduino & IOT Boards, Module
DS1302 RTC Module
- The real-time clock counts minutes, seconds, date, hours, month day of the week, year and leap-year compensation upto 2100.
- 318 temporary data storage RAM
- Working current of 2.0V, less than 300nA
- Read / Write clock or RAM data with two kinds of mode of single-byte transfer mode and multi-byte character set
- 8 pin DIP package or optional 8 pin SOIC package based on the surface assembly
- Simple 3 wire interface
- Compatible with TTL Vcc=5V
- Double power supply pipe for main power and backup power supply.
SKU: n/a -
Arduino & IOT Boards, Module, Shields
W5100 Ethernet Shield
- Operating voltage 5V (supplied from the Arduino Board)
- Ethernet Controller: W5100 with internal 16K buffer
- Connection speed: 10/100Mb
- Connection with Arduino on SPI port
- The Shield contains a number of informational LEDs
- PWR: indicates that the board and shield are powered
- LINK: indicates the presence of a network link and flashes when the shield transmits or receives data
- FULLD: indicates that the network connection is full duplex
- 100M: indicates the presence of a 100 Mb/s network connection (as opposed to 10 Mb/s)
- RX: flashes when the shield receives data
- TX: flashes when the shield sends data
- TX: flashes when the shield sends data
- COLL: flashes when network collisions are detected
SKU: n/a
There are no reviews yet.