-
×
Arduino Leonardo R3
1 × ₨ 1,599 -
×
IR Infrared sensor Two way Obstacle Sensor
1 × ₨ 109
Subtotal: ₨ 1,708
-20%
Pumps, Sensors, Water, Water Pumps
Waterflow Sensor YFS101
This water flow sensor has a pinwheel sensor inside it which helps the sensor detect how much liquid has passed through it. By counting pulses from the output of the sensor water flow can be calculated. Each pulse is approximately 2.25 millimeters.
₨ 749 ₨ 936
Based on 0 reviews
Be the first to review “Waterflow Sensor YFS101”
Related products
-
Flex & Force, Sensors
Flex Sensor 4.5″
- Thickness: 0.4mm
- Trigger Force: 20g, triggered (default resistance<200kΩ)
- Pressure Measuring Range: 20g~6kg
- Static Pressure & Dynamic Pressure Measurement (within the frequency of 10Hz)
- Initial Resistance: >10MΩ
- Activation Time: <0.01S
- Operating Temperature: -40℃~+85℃
- Lifespan: >1million times
- Hysteresis: +10%，(RF+ -RF-)/FR+，1000g Force
- Response Time: <10ms
- Drift: <5%, 2.5Kg Force, Static load 24H
SKU: n/a -
Accelero, Gyro. IMU, Magneto, Sensors
10 DOF IMU Sensor
3 Axis Accelerometer + 3 Axis Gyroscope + 3 Axis Magnetometer + Pressure Sensor on one board i.e.
ADXL 345+L3G4200D+HMC5883L+BMP085 sensors all in one board. There are also a 2.5V voltage regulator, the logic level converter circuit to make it work under the power of 3V-5V. Thanks to the logic level converter circuit, you can connect it with a 3V-5V MCU directly, just plug and play! Also every interrupt pin of the sensors is leaded out.
SKU: n/a -
Others, Sensors
Microphone Amplifier – MAX9814 w/ Auto Gain Control
- The default ‘max gain’ is 60dB, but can be set to 40dB or 50dB by jumpering the Gain pin to VCC or ground.
- You can change the Attack/Release ratio, from the default 1:4000 to 1:2000 or 1:500.
- The ouput from the amp is about 2Vpp max on a 1.25V DC bias, so it can be easily used with any Analog/Digital converter that is up to 3.3V input. If you want to pipe it into a Line Input, just use a 1uF blocking capacitor in series.
SKU: n/a -
Gas Sensor, Sensors
MQ7 MQ-7 Gas Sensor Detection Module
- Product Name: Gas Sensor Module;
- Model: MQ-7;
- Type: Analog
- Detecting Type : Carbonic Oxide(Co);
- Rated Voltage: DC 5V;
- Rated Current: 180mA
- Detecting Range: 100-1000ppm;
- Pin Quantity: 4;
- Pin Spacing: 1.8mm/ 0.07″
- Pin Definition: AO-analog Output, DO-Digital Output, GND- Ground, VCC-Voltage To Current Converter ;
- Total Size: 35 x 20 x 21mm/ 1.4″ x 0.79″ x 0.83″ (L*W*H)
SKU: n/a
There are no reviews yet.