Others
Showing all 16 results
-
-
Others, Sensors
AH175 Hall Sensor
Hall effect sensor is transducing devices used to detect and generate a voltage when in the presence of a magnetic field. They are designed to induce a voltage as an output when a magnetic field is present at its input. The output voltage can be variable depending on the magnitude of the magnetic field. Hall effect sensors, as they name states are effect sensors, which can be used to sense different categories, like speed, position of objects, rotational speed or frequency and be used as a fault detector. They can be used to detect a time-varying current, as time-varying current produce magnetic fields, which can then be sensed by the Hall effect transducer and produce a voltage with some proportion the amount of magnetic field present at the sensor.
SKU: n/a -
Arduino & IOT Boards, Module, Others, Sensors, Shields
Arduino Sensor Shield
- It has a Pin 13 LED pilot.
- It has D0-D13 IO ports.
- A0-A5 analog IO ports.
- It contains a reset button.
- It also contains a Power LED.
- It has an SD card interface.
- It contains an Ultrasonic interface.
- This expansion board has an RS232 interface.
- It has a Bluetooth interface.
- It has an APC220 interface.
- IIC interface.
- 12864 LCD Parallel interfaces.
- It contains 12864 LCD Serial Interface
SKU: n/a -
Others
Hot End For 3D Printer
- Model: J-Head Hot End V6
- Design: Long-Distance
- Improved processing of flexible filament
- More compact design
- Easier maintenance
- Reduced heating
- Improved temperature control and cooling
- Material: aluminum
- Nozzle: 0.4 mm
- Filament: 1.75 mm
- 12V 40W heating cartridge
- NTC thermistor 100k
- Cable length: approx. 90 cm
SKU: n/a -
Others
IRFZ44 N-CHANNEL POWER MOSFET 49A 55V
- Small signal N-Channel MOSFET
- Continuous Drain Current (ID) is 49A at 25C
- Pulsed Drain Current (ID-peak) is 160A
- Minimum Gate threshold voltage (VGS-th) is 2V
- Maximum Gate threshold voltage (VGS-th) is 4V
- Gate-Source Voltage is (VGS) is 20V (max)
- Maximum Drain-Source Voltage (VDS) is 55V
- Rise time and fall time is about 60ns and 45ns respectively.
- It is commonly used with Arduino, due to its low threshold current.
SKU: n/a -
Arduino & IOT Boards, Module, Others, Sensors
KY-021 Mini Magnetic Reed Module for Arduino
- Operating voltage: 3.3V to 5V
- Output type: Digital
- Dimensions: 20 x 15 x 7mm
- Input voltage: 3.3~5v
- Weight: 1.2g
- Reed switch: Normally open
- Reed switch sensitivity: 30 gauss
- Operating temperature: -20°C to 85°C
- Storage temperature: -40°C to 125°C
SKU: n/a -
Others, Sensors
Microphone Amplifier – MAX9814 w/ Auto Gain Control
- The default ‘max gain’ is 60dB, but can be set to 40dB or 50dB by jumpering the Gain pin to VCC or ground.
- You can change the Attack/Release ratio, from the default 1:4000 to 1:2000 or 1:500.
- The ouput from the amp is about 2Vpp max on a 1.25V DC bias, so it can be easily used with any Analog/Digital converter that is up to 3.3V input. If you want to pipe it into a Line Input, just use a 1uF blocking capacitor in series.
SKU: n/a -
Others, Sensors
Piezo Pack of 5 Large Pickups 45mm
Piezo Pack of 5 Large Pickups 45mm Attach the round disc to the object that will be knocked on such as a door and measure the voltage across the two wires. Piezo elements can also produce sound when a voltage is applied across them. They convert between electricity and vibration in both ways; Vibration applied at the round end can be detected as a voltage across the wire leads and inversely, the voltage applied across the wire leads causes the round end to vibrate.
SKU: n/a -
Others, Sensors
Piezoelectric Shock Tap Sensor Vibration Switch Module
- Item Name: Piezoelectric Shock Tap Sensor Vibration Switch Module
- Item Type: Vibration Switch Sensor Module
- Working Voltage: 5.0V (DC)
- Interface Type: AD/DO
- AO: Analog Signal Output
- DO: TTL Level Output
- Working Temperature: -10 C ~ +70 C
- Size: Approx. 20 x 20mm / 0.8 x 0.8in
- Weight: 4.5 g / 0.2 oz(approx.)
- Test Method and Wiring:
- G (GND):: Power ground
- V (VCC): Operating voltage 5V (DC)
- ADO: Analog signal output
- According to the vibration intension, the higher the output voltage, the higher the vibration amplitude sensitivity can be adjusted by the potentiometer (the left turn sensitivity is low, the right turn sensitivity is high). The high sensitivity output can be adjusted to respond with a mouth blow or a tap with a hand.
- DO: TTL level output. Output signal LED indication. TTL output valid signal is high level, output control power
SKU: n/a -
Others, Sensors
SW-520D – Tilt Sensor Module
- Using high-sensitivity switch SW 520D as the sensor.
- The module is equipped with fixed bolt hole for convenient installation.
- Using LM393 wide voltage comparator, clean signal, good waveform, strong driving ability with output of more than 15 mA.
- The working voltage of 3.3V to 5V.
- Small PCB size:3.2cm x 1.4cm.
- Digital output form: digital switch output (0 and 1).
SKU: n/a -
-
Others, Sensors
Vibration Sensor SW-420
- Dimensions: 40 x 15 x 7 mm(LxWxH).
- Weight: 3 gm.
- Using SW-420 normally closed type vibration sensor
- Comparator output, clean signal, good waveform, strong driving ability, >15mA
- Operating voltage 3.3V ~ 5V
- Output format: digital switching output (0 and 1)
- Using a wide voltage LM393 comparator
- With bolt holes for easy installation
SKU: n/a
