-
×
Edison Robot – EdPack10
1 × ₨ 245,000
Subtotal: ₨ 245,000
Special Offer
save 18%
RF 315/433 Transmitter/Receiver Module
₨ 299-
Arduino & IOT Boards, Boards
Arduino UNO R3 SMD – Economic
- ATmega328-AU microcontroller with UNO Bootloader Installed.
- USB Programming Facilitated by the CH340G.
- Input voltage – 7-15V.
- 0-5V outputs with 3.3V compatible inputs.
- 14 Digital I/O Pins (6 PWM outputs).
- 6 Analog Inputs.
- ISP Header.
- 32k Flash Memory.
- 16MHz Clock Speed.
- All SMD Construction.
- R3 Shield Compatible
SKU: ARD-317-1 -
-
Arduino & IOT Boards, Kits
Beginner Arduino Uno Starter Kit
In Pakistan, the Arduino Starter Kit Arduino Basic Kit Arduino Beginner Kit is the finest educational option for learning how to utilize the Arduino platform. It includes an Arduino Uno SMD board, an enhanced version of the R3, a variety of sensors and, Motor, led’s Dot-matrix, Lcd, and many other components required for the very first steps with electronics into the realm of interactive and sensing objects. The Arduino Starter Kit is an excellent present for children aged 9 to 99. The Arduino starter kit is an open-source electronics prototyping platform built on adaptable, user-friendly hardware and software. It includes all of the necessary components to begin programming with the Arduino Uno board.
SKU: n/a -
Arduino & IOT Boards, Boards
Arduino MEGA 2560 PRO Mini
- Microcontroller ATmega2560
- USB-TTL converter: CH340
- Power Out:5V-800mA
- Power IN.: 5V
- Power IN. VIN/DC Jack:5V
- Power Consumption: 5V 220mA
- Logic Level: 5V
- USB: Micro USB
- Clock Frequency: 16MHz
- Operating Supply Voltage: 5V
- Digital I/O: 54
- Analog I/O: 16
- Memory Size: 256kb
- Data RAM Type/Size: 8Kb
- Data ROM Type/Size: 4Kb
- Interface Type : ISP
- Operating temperature 40C/+85C
- Length x Width:38mmx54mm
SKU: n/a -
Bread Board, circuit boards
Half Size Breadboard 400 Points For Electronics
Half Size MB102 Solderless Breadboard Prototyping Board is commonly used by students and hobbyists to quickly assemble an electronics project without using a soldering station. These Breadboard Project Board MB102 can be connected with one-another to make a larger board for complex projects
SKU: n/a -
Bread Board, circuit boards
OTH20 170 Tie Points Mini Breadboard
- This is a tiny breadboard, measuring approximately 1.8″ x 1.4″ (46mm x 36mm).
- It is half the size of a regular half-size breadboard.
- The mini breadboard is perfect for small projects and can be easily attached to the top of an Arduino proto shield.
SKU: n/a
-
Digital Meter, Multi Meters
Mini DC 100V 10A Digital Voltmeter Ammeter Blue Red LED Volt Amp Meter Gauge
Digital Meter, Multi MetersMini DC 100V 10A Digital Voltmeter Ammeter Blue Red LED Volt Amp Meter Gauge
- Operating voltage: DC 4.5 – 30V
- Measure voltage: DC 0 – 100V
- Minimum resolution(V): 0.1V
- Measure current :10A (measure directly, built-in shunt)
- Minimum resolution(A): 0.01A
- Operating current:
- Dimensions: 48 x 29 x 21mm
- Mounting cutout: 45.5 x 26.5mm
- Refresh rate: about 500mS / times
- Measure accuracy: 1% (± 1 digit)
- Operating temperature: -10 to 65° c
- Operating Humidity: 10 to 80% (non-condensing)
SKU: n/a -
DIY Kits, Edison
EdSTEM Home Edison robots and EdCreate kit
Bring coding, robotics, and engineering to life with the powerful Edison Robot V3 and the interactive EdCreate Creator’s Kit – now available in Pakistan!
Perfect for students, hobbyists, and classrooms, this dynamic duo offers hands-on learning experiences that develop real-world problem-solving skills while making learning fun and engaging.
SKU: n/a -
DIY Kits, Edison
EdSTEM Home Pack – 2 Edison robots and EdCreate kit
Bring coding, robotics, and engineering to life with the powerful Edison Robot V3 and the interactive EdCreate Creator’s Kit – now available in Pakistan!
Perfect for students, hobbyists, and classrooms, this dynamic duo offers hands-on learning experiences that develop real-world problem-solving skills while making learning fun and engaging.
SKU: n/a -
-
-
Digital Meter, Multi Meters
Mini DC 100V 10A Digital Voltmeter Ammeter Blue Red LED Volt Amp Meter Gauge
Digital Meter, Multi MetersMini DC 100V 10A Digital Voltmeter Ammeter Blue Red LED Volt Amp Meter Gauge
- Operating voltage: DC 4.5 – 30V
- Measure voltage: DC 0 – 100V
- Minimum resolution(V): 0.1V
- Measure current :10A (measure directly, built-in shunt)
- Minimum resolution(A): 0.01A
- Operating current:
- Dimensions: 48 x 29 x 21mm
- Mounting cutout: 45.5 x 26.5mm
- Refresh rate: about 500mS / times
- Measure accuracy: 1% (± 1 digit)
- Operating temperature: -10 to 65° c
- Operating Humidity: 10 to 80% (non-condensing)
SKU: n/a -
DIY Kits, Edison
EdSTEM Home Edison robots and EdCreate kit
Bring coding, robotics, and engineering to life with the powerful Edison Robot V3 and the interactive EdCreate Creator’s Kit – now available in Pakistan!
Perfect for students, hobbyists, and classrooms, this dynamic duo offers hands-on learning experiences that develop real-world problem-solving skills while making learning fun and engaging.
SKU: n/a -
DIY Kits, Edison
EdSTEM Home Pack – 2 Edison robots and EdCreate kit
Bring coding, robotics, and engineering to life with the powerful Edison Robot V3 and the interactive EdCreate Creator’s Kit – now available in Pakistan!
Perfect for students, hobbyists, and classrooms, this dynamic duo offers hands-on learning experiences that develop real-world problem-solving skills while making learning fun and engaging.
SKU: n/a -
-
Products Grid
-
Arduino & IOT Boards, Boards
Arduino UNO R3 Dip WITH CABLE
- ATmega328 microcontroller
- Input voltage – 7-12V
- 14 Digital I/O Pins (6 PWM outputs)
- 6 Analog Inputs
- 32k Flash Memory
- 16Mhz Clock Speed
- ATmega328
- Operating Voltage 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) 6-20V
- Digital I/O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins 6
- DC Current per I/O Pin 40 mA
- DC Current for 3.3V Pin 150 mA
- Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader SRAM
- 2 KB (ATmega328) EEPROM
- 1 KB (ATmega328)
- Clock Speed 16 MHz
SKU: ARD-002 -
Mega Payday Sale, Module, Relay Modules, Relay Modules, Relays & Interface Module
1 Channel Relay Module
Mega Payday Sale, Module, Relay Modules, Relay Modules, Relays & Interface Module1 Channel Relay Module
- VCC: Power interface,5V
- GND: Ground
- IN: Control interface.
- Drive Current: At least 4mA
- COM: Control circuit ground, connect to GND
- Size: approx. 41 x 16 x 16mm/ 1.61 x 0.62 x 0.62”
- Weight: Approx. 12g
SKU: n/a -
Wires & Connectors
Arduino Jumper Wire M/M 40Pcs
- Compatible with 2.54 mm spacing pin headers.
- 120 pcs chromatic color jump wire.
- High quality and in good working condition.
- Durable and reusable.
- Easy to install and use.
- A popular choice for construction or repair.
- Be used for the electronic project and Genuine Arduino product.
- Flexible Breadboard Jumper Cable Wire allows you to plug and unplug easily for prototyping.
SKU: n/a -
Bread Board, circuit boards
Breadboard GL-12
- Solder less breadboard with 840 tie points.
- Self-adhesive tape is included on the back, One Terminal Strips Tie-point 640
- Two distribution strips tie-point 200.
- White ABS plastic body with printed legend. The color legend on distribution strips.
- Accept resistors, transistors, diodes, LEDS, capacitors and other types of electronic components.
- Wire size: Suitable for 29-20 AWG wires.
- Size: 175 x 67 x 8 mm
SKU: n/a
-
IR & Vision, Mega Payday Sale, SensorsIR Infrared sensor Two way Obstacle Sensor
- Reliable and accurate: Infrared obstacle avoidance sensors are a reliable and accurate way to detect objects in the environment. They are not affected by ambient light, making them a good choice for applications where there is a lot of light.
- Inexpensive: Infrared obstacle avoidance sensors are relatively inexpensive, making them a cost-effective solution for many applications.
- Easy to use: Infrared obstacle avoidance sensors are easy to use and can be integrated into a variety of applications.
- Durable: Infrared obstacle avoidance sensors are durable and can withstand harsh environments.
SKU: n/a
-
Batteries & Chargers
Powerplus Battery 9V
- Power Plus 9 Volt batteries power everyday devices
- Power for your nonstop family’s must-have devices like toys, flashlights, remotes, and more
- Nominal voltage: 9 V
- Impedance: 1,700 m-ohm @ 1 kHz
- Typical weight: 45 g (1.6 oz)
- Typical volume: 22.8 cm (1.4 in)
- Terminals: Miniature snap
- Operating temperature range: -20ºC to 54ºC (-4ºF to 130ºF)
SKU: n/a -
Distance & Proximity, Sensors
Ultrasonic Sensor HC-SR04
- Power Supply : 5V DC
- Quiescent Current : <2mA
- Working Currnt: 15mA
- Effectual Angle: <15
- Ranging Distance : 2cm 400 cm/1x13ft
- Resolution : 0.3 cm
- Measuring Angle: 30 degree
- Trigger Input Pulse width: 10uS minimum
- Dimension: 45mm x 20mm x 15mm
SKU: n/a -
Arduino & IOT Boards, Boards
Arduino UNO R3 SMD – Economic WITH CABLE
- ATmega328-AU microcontroller with UNO Bootloader Installed.
- USB Programming Facilitated by the CH340G.
- USB-B Connector and cable included.
- Input voltage – 7-15V.
- 0-5V outputs with 3.3V compatible inputs.
- 14 Digital I/O Pins (6 PWM outputs).
- 6 Analog Inputs.
- ISP Header.
- 32k Flash Memory.
- 16MHz Clock Speed.
- All SMD Construction.
- R3 Shield Compatible
SKU: ARD-317 -
Arduino & IOT Boards, Boards
Arduino Leonardo R3
he Arduino Leonardo is a microcontroller board based on the ATmega32u4 (datasheet). It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
SKU: ARD-452
Best Sellers
Recenly Added
Digital Meter, Multi Meters
Mini DC 100V 10A Digital Voltmeter Ammeter Blue Red LED Volt Amp Meter Gauge
Digital Meter, Multi Meters
Mini DC 100V 10A Digital Voltmeter Ammeter Blue Red LED Volt Amp Meter Gauge
Operating voltage: DC 4.5 – 30V
Measure voltage: DC 0 – 100V
Minimum resolution(V): 0.1V
Measure current :10A (measure directly, built-in shunt)
Minimum resolution(A): 0.01A
Operating current:
Dimensions: 48 x 29 x 21mm
Mounting cutout: 45.5 x 26.5mm
Refresh rate: about 500mS / times
Measure accuracy: 1% (± 1 digit)
Operating temperature: -10 to 65° c
Operating Humidity: 10 to 80% (non-condensing)
SKU: n/a
DIY Kits, Edison
EdSTEM Home Edison robots and EdCreate kit
Bring coding, robotics, and engineering to life with the powerful Edison Robot V3 and the interactive EdCreate Creator’s Kit – now available in Pakistan!
Perfect for students, hobbyists, and classrooms, this dynamic duo offers hands-on learning experiences that develop real-world problem-solving skills while making learning fun and engaging.
SKU: n/a
DIY Kits, Edison
EdSTEM Home Pack – 2 Edison robots and EdCreate kit
Bring coding, robotics, and engineering to life with the powerful Edison Robot V3 and the interactive EdCreate Creator’s Kit – now available in Pakistan!
Perfect for students, hobbyists, and classrooms, this dynamic duo offers hands-on learning experiences that develop real-world problem-solving skills while making learning fun and engaging.
SKU: n/a
DIY Kits, Edison
EdSTEM Class Pack – 30 Edison robots and 15 EdCreate kits
Bring coding, robotics, and engineering to life with the powerful Edison Robot V3 and the interactive EdCreate Creator’s Kit – now available in Pakistan!
Perfect for students, hobbyists, and classrooms, this dynamic duo offers hands-on learning experiences that develop real-world problem-solving skills while making learning fun and engaging.
SKU: n/a
Arduino & IOT Boards, Module
74HC4067 CD74HC4067 Precise Module Digital Multiplexer MUX Breakout Board
Arduino & IOT Boards, Module
74HC4067 CD74HC4067 Precise Module Digital Multiplexer MUX Breakout Board
16-channel analog/digital multiplexer/demultiplexer
Routes one signal to/from any of 16 I/O pins
Supports both analog and digital signals (bidirectional)
Operates over a wide voltage range:
HC: 2V to 6V
HCT: 4.5V to 5.5V (TTL compatible)
Low ON-resistance (~60–70Ω depending on voltage)
Fast switching speed (typical ~6ns)
Break-before-make switching to prevent shorting
Minimal leakage current (±0.8 µA typical)
Very low standby power consumption (~8 µA typical)
Built-in Enable pin (active LOW) for full shutdown
Channel selection via 4 digital address pins (S0–S3)
Works reliably in wide temperature range (–55°C to +125°C)
Compatible with microcontrollers like Arduino, ESP32, and Raspberry Pi
Ideal for expanding ADC input, signal routing, or sensor switching in compact circuits
SKU: n/a
Optical Sensors/Photo Transistors, Sensors
Color Mark Sensor Z3n-Tb22
Z3N colour mark photoelectric sensor can be widely used in bag-making machines, cutting machines, packaging machinery, pharmaceutical machinery, compound machinery and other machinery for colour standard tracking and edge tracking, following the line deviation correction
SKU: n/a
Mega Payday Sale, Optical Sensors/Photo Transistors, Sensors
OMRON E3Z-D62 100 MA MAX Output 12 VDC to 24 VDC PHOTOELECTRIC Sensor
Mega Payday Sale, Optical Sensors/Photo Transistors, Sensors
OMRON E3Z-D62 100 MA MAX Output 12 VDC to 24 VDC PHOTOELECTRIC Sensor
IP67 rated PBT housing with methacrylate lens
PNP and NPN output configurations
Light ON/dark ON selectable
Small dead-band for sensing close targets
Retro-reflective versions have a polarised light source for shiny object detection
Short circuit and reverse polarity protection
Mutual interference protection (retro and diffuse versions only)
Operating temperature range -25 °C → +55°C
SKU: n/a
Solenoid Locks and Valves
12V DC Water/Gas Flow Solenoid Valve Normally Closed
Voltage: 12V DC.
Valve type: diaphragm (Operated by Servo).
Mode of operation: Normally closed.
Fluid temperature: 1-100 ℃.
Size: 8.5cm x 6cm x 4.3cm.
1/2″ Nominal NPS
Working Pressure: 0.02 Mpa – 0.8 Mpa
Working Temperature: 1 ℃ – 75 ℃
Response time (open): ≤ 0.15 sec
Response time (close): ≤ 0.3 sec
Actuating voltage: 12VDC (but we found it would work down to 6V)
Actuating life: ≥ 50 million cycles
Weight: 4.3 oz
Rated Power: 5W
SKU: n/a
Edison
Edison Robot V3 Complete STEM Education Combo – Robot + EdCharger + EdCreate Kit
Empower young minds with the Edison Robot V3 Combo – Pakistan’s most advanced, all-in-one robotics and coding solution. Perfect for schools, homeschooling, and tech-savvy kids, this bundle combines the smart Edison V3 Robot, the fast-charging EdCharger, and the creative EdCreate Kit – everything you need to start building, coding, and innovating!
SKU: n/a
DIY Kits, Edison, Robotics
EdCharger – Charging & Storage Solution for Edison V3 Robots
Product Name: EdCharger – Charging & Storage for Edison V3 Robots
Compatibility: Edison V3 robot only (not compatible with earlier versions)
Charging Capacity: Up to 5 Edison V3 robots simultaneously
Power Input: USB-A (not included)
Minimum Power Requirement: 1 Amp (5 watts)
Dimensions: 24.2 cm (L) x 5 cm (W) x 9.5 cm (H)
Weight: Lightweight and portable (exact weight not specified by manufacturer)
Material: Durable, classroom-safe plastic (assumed standard educational-grade)
Use Case: Charging and storage solution for education, robotics labs, and STEM programs
Color: Typically orange and black (standard Edison robot color scheme; may vary)
Included in Box: 1 x EdCharger unit (USB power source not included)
SKU: n/a
Batteries & Chargers, Battery Management System (BMS)
13S 48V 60A Li‑Ion Battery Protection & Equalizer BMS – High‑Power 60 A Board
Batteries & Chargers, Battery Management System (BMS)
13S 48V 60A Li‑Ion Battery Protection & Equalizer BMS – High‑Power 60 A Board
Cell Configuration: 13S (13 cells in series)
Nominal Voltage: 48 V
Continuous Discharge: 60 A
Protection Types: Overcharge, Over-discharge, Overcurrent, Short circuit
Balance Feature: Equalizer board keeps cells in sync
Waterproof & Durable: Dust/shock resistant
Size & Weight: ~70 × 56 × 9 mm, ~60 g
SKU: n/a
Batteries & Chargers, Battery Management System (BMS)
13S 30A 48V Li-ion Battery Protection Board BMS
Batteries & Chargers, Battery Management System (BMS)
13S 30A 48V Li-ion Battery Protection Board BMS
Battery Type: Lithium-ion (3.7V cells)
Battery Configuration: 13S (13 cells in series)
Nominal Voltage: 48V
Max Input Charging Voltage: 54.6V
Input Charging Current: 30A
Output Discharging Current: 30A
Cell Type: 18650 or similar Li-ion cells
Operating Temperature: -40°C to +125°C
Board Type: Charging and Protection PCB with Balance
SKU: n/a
Batteries & Chargers, Battery Management System (BMS)
DALY 7S 24V 100A Li-Ion BMS – Smart Battery Management with Balance, Cooling & Protection
Batteries & Chargers, Battery Management System (BMS)
DALY 7S 24V 100A Li-Ion BMS – Smart Battery Management with Balance, Cooling & Protection
Supports 7-cell (7S) Li-Ion battery packs – ideal for 24V systems
100A continuous current rating, with surge support up to 150–300A
Advanced thermal management with heat sinks and fan-ready design
Automatic cell balancing (100mA passive balancing) ensures voltage uniformity
Overcharge, over-discharge, overcurrent, short-circuit, and temperature protection
Optional Bluetooth, CAN, UART, or WiFi modules for real-time monitoring
Waterproof, dustproof, and vibration-resistant casing
Low standby current for improved energy efficiency
Certified for safety and durability (ISO, FCC, CE, RoHS, etc.)
SKU: n/a
Batteries & Chargers, Battery Management System (BMS)
DALY 16S 48V 30A LiFePO4 BMS – Waterproof Battery Management System with Balancing & Temperature Sensor
Batteries & Chargers, Battery Management System (BMS)
DALY 16S 48V 30A LiFePO4 BMS – Waterproof Battery Management System with Balancing & Temperature Sensor
Compatible with 16S (48V) LiFePO4 battery packs only
30A continuous discharge, up to 90A peak current
Passive balance charging function (3.5V balance point)
Built-in temperature protection for safe operation in hot or cold climates
Overcharge & Over-discharge voltage protection
Short circuit and overcurrent protection with fast shut-off
Waterproof & corrosion-resistant PCB with low resistance (<20mΩ)
Suitable for solar storage, RVs, boats, skateboards, tools, and e-bikes
Works with 18650, 21700, 36500, and prismatic lithium cells
SKU: n/a
Batteries & Chargers, Battery Management System (BMS)
4S 30A LiFePO4 Balanced Charging BMS PCB Board – High-Performance BMS for 12.8 V Battery Packs
Batteries & Chargers, Battery Management System (BMS)
4S 30A LiFePO4 Balanced Charging BMS PCB Board – High-Performance BMS for 12.8 V Battery Packs
Compatible with 4S (4-cell) LiFePO4 battery packs (12.8V nominal)
30A continuous discharge current for high-performance load handling
Peak discharge current: up to 60A (for short duration)
Charge voltage per cell: Max 3.65V
Overcharge detection voltage: 3.75V ± 0.05V
Overcharge release voltage: 3.65V ± 0.05V
Over-discharge detection voltage: 2.5V ± 0.1V
Over-discharge release voltage: 2.8V ± 0.1V
Balance function: Yes (Passive balancing)
Balance voltage: 3.5V
Balance current: ~30mA
Short-circuit protection: Yes (Auto recovery)
Overcurrent protection: Yes (~1ms response time)
Operating temperature range: -20°C to 70°C
Storage temperature range: -40°C to 80°C
Ultra-low standby power consumption
Compact size: approx. 50mm x 22mm x 4mm (may vary slightly)
Waterproof and corrosion-resistant PCB coating (based on model)
SKU: n/a