Showing all 45 results
12v DC cooling fan 80mm Ideal for compact PC cases (HTPC, ITX, Small Form Factor) and other chassis (intake & exhaust), replacement fan for NAS and other devices, etc. you can order all types of electrical and electronics components at ELECTRONATION.PK
This is a gear motor with encoder. It is a motor with a 34:1 gearbox and an integrated quadrature encoder that provides a resolution of 11 pulse single per round giving a maximum output of 374 within one round. With an Arduino controller and motor driver, applications for this include a closed-loop PID control or PWM motor speed control. This motor is an ideal option for mobile robot projects. The copper output shaft, embedded thread and reinforced connector greatly extends the motor’s service life.
2.5inch 12V DC Fan Cooling Fan is the best choice for customers. This Exhaust Fan with high-quality material is ideal for compact PC cases (HTPC, ITX, Small Form Factor) and other chassis (intake & exhaust), replacement fan for NAS and other devices, etc. This fan is made from injection-molded, plastic housing a durable DC motor for long life. 2.5 inch 12V DC Fan is 4 through holes to allow easy mounting to a variety of surfaces. Our 12V DC fans are the clear choice for anyone needing, quality, reliability, and low-cost cooling in their DIY project.
Specifications:
Model: GM12-N20
Material: Alloy Gear
Rated Voltage: DC 6.0V
No Load
Speed: 56RPM
Current: 50mA
With Maximum Efficiency
Speed: 40RPM
Current: 150mA .
Torque: 73.5 mN.m (26.46 oz)
Stall
Torque: 6.6 lbs.cm
Current: 0.6A
Size: 0.394 x 0.433 x 1.378 in.
Arduino 28BYJ48 Stepper Motor With ULN2003 Driver Board Description: This is 28YBJ-48 DC 5V 4 phase 5 wire stepper motor with ULN2003 driver board5-wire phase can drive ordinary uln2003 chip can also be connected as phase 2 may be supporting the development board, direct plug. Motor: Diameter: 28mmVoltage: 5VStep angle: 5.625 x 1/64Reduction ratio: 1/64ULN2003 driver board: A, B, C, D LED indication Four-phase stepper motor work status Size: 31x35mmPackage included:1 x ULN2003 driver board1 x 28BYJ-48 stepper motor Options:
Specification: DC Gear Motor 6v TT Gear Motor Yellow Double Shaft
Operating voltage: 3V-6VDC .
Reduction Ratio: 1:48.
The load current: less than or equal to150mA (3V) , less than or equal to200mA (6V) .
No-load Speed: 90+/-10% rpm(3V), 200±10% rpm(6V) .
Color: Yellow.
Material: Plastic, metal.
Size: 7×2.2×1.8cm
This is 6V DC Motor 10kg-cm 210RPM w/Encoder metal geared DC motor w/Encoder. It is a 6V motor with a 34:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 11 counts per revolution of the motor shaft, which corresponds to 341.2 counts per revolution of the gearbox’s output shaft.
Operating voltage: 3V ~ 6V DC (recommended value 5V)
Maximum torque: 800g.cm
Speed without load: 90x10rpm
Reduction ratio: 1:48
No Load current: 190mA(max.250mA)
Stall Current: ~1A
Strong anti-interference on this motor keeps it safe around micro-controllers.
Buy best quality DC Motor at the minimal rates from ElectroNation.
775 motor, with metal rollers in the front, trailed by a copper coat
Shaft length: 17mm;
Shaft distance across: 5mm
Body Diameter: 42mm; Body Length: 66.7mm
Mounting Hole Size: M4;
Mounting Hole: 2
Buy the best quality DC Motor at minimal rates from Electronation.
1.Module supply voltage: DC 2V-10V
2.Signal input voltage: DC 1.8-7V
3.Single working current: 1.5A
4.Peak current up to 2.5A
5.Low standby current (less than 0.1uA)
6.Built-in common conduction circuit, the input terminal vacant, the motor does not malfunction
7.Size: 24.7 x 21 x 7mm
8.Mounting hole diameter: 2 mm
6V 60Rpm Geared DC Motor is a mini geared motor with high torque capability despite its small size and because of that it is very suitable for small sized projects that require high torque such as sumo robots. The motor runs at 60rpm at 6V. It is suggested not to run the motor at voltages higher than 6V.
This is high torque compact 2-2 PHASE stepper motor with 48 steps per revolution with working voltage 24v 600ma. It has enough torque to move small robots and the motor comes with gear shaft attached.
Usage/Applications
MG995 MG-995 Metal Gear Servo Motor Tower Pro-360 Degree comes complete with 30cm wire and 3 pins S type female header connector that fits most receivers, including Futaba, JR, GWS, Cirrus, Blue Bird, Blue Arrow, Corona, Berg, Spektrum, and Hitec. This high-speed standard servo can rotate approximately 360 degrees (60 in each direction). You can use any servo code, hardware, or library to control these servos, so its great for beginners who want to make stuff move without building a motor controller with feedback & gearbox, especially since it will fit in small places. The MG995 Metal Gear Servo also comes with a selection of arms and hardware to get you set up nice and fast.
This is ULN2003 Driver Module Stepper Motor Driver, small size and easy to use. It uses the ULN2003 driver chip to amplify the control signal from the Arduino. This Ultra Lightweight and cheap option commonly used to run and control the small applications stepper motors.
Soil Moisture Sensor For Arduino 
Nema 17 Stepper motor, 6V 1A, 1.8 degree, 2 phase 4 wires 
Graphical LCD 128x64 
DC gear motor Yellow 
