-
×
Biomedical Sensor Pad (10 pack)
1 × ₨ 699
Subtotal: ₨ 699
-23%
Distance & Proximity, Sensors
PR12 4DP Proximity sensor Autonics
| Sensing distance | 1.5mm |
| Installation | Shield(flush) |
| Standard sensing target | 8×8×1mm(iron) |
| Response frequency | 1.5kHz |
| Current specification | Current consumption: Max. 10mA |
| Control output | PNP Normally Open |
| Material | Brass(nickel plated) |
| Cable Standard/material | Standard cable |
| Body length | Standard type |
| Weight | Approx. 64g (approx. 52g) |
₨ 799 ₨ 1,039
PR12 4DP Proximity sensor Autonics
Power 12-24 VDC
– Drat: M12x1
– Sensing distance: 4mm
– PNP Open Collector output, Normally Open
– Sensor head type: non-flush / non-shield
– Material: Case Nickel-plated brass, Sensing Surface: PBT
– Connection: Cable type (4,2m), 3 wire
– Sensor length specifications, can be seen in the image section
Based on 0 reviews
Be the first to review “PR12 4DP Proximity sensor Autonics”
Related products
-
Gas Sensor, Sensors
MQ135 Air Quality Detector Sensor Module
- Air Quality Sensor Module
- Condition: New
- Size: 32mm X22mm X27mm
- Main chip: MQ-135
- Operating Voltage: 5V DC
- Type: Analog & Digital
- Sensitivity to Ammonia, Sulphide and Benzene steam
- Detecting Range: 100-1000ppm
- With signal output instructions
- TTL output signal is low level
- Analog 0 ~ 5 v voltage output, the higher the concentration, the higher the voltage
- Color is showing pictures.
- Sensitive for benzene, alcohol, smoke
- Fast response and recovery
- Adjustable sensitivity
- Signal output indicator
- Output voltage boosts along with the concentration of the measured gases increases
SKU: n/a -
Sensors, Weight
Load Sensor – 50kg
- Capacity: 40-50kg
- Comprehensive Error: 0.05mv/v
- Output Sensitivity: 1.0 0.1mv/v
- Nonlinearity: 0.03%FS
- Repeatability: 0.03%FS
- Hysteresis: 0.03%FS
- Creep: 0.03 (3min)%FS
- Zero Drift: 0.03(1min)%FS
- Temp. Effect on Zero: 10 1Zero %FS/
- Temp. Effect on Output: 0.05%FS/10
- Zero Output: 0.1mV/V
- Input Resistance: 1000 20
- Output Resistance: 1000 20
- Insulation Resistance: 5000M
- Excitation Voltage: 10V
- Operation Temp. Range: 0+50
- Overload Capacity: 150%FS
SKU: n/a -
Distance & Proximity, Sensors
HCSR501 HC-SR501 PIR Sensor
- Use BISS0001 signal processing IC, sanyo genius regulator
- Voltage: 5V 20V
- Power Consumption: 65mA
- TTL output: 3.3V, 0V
- Delay time: adjustable (0.3 sec 10 minutes)
- Lock time: 0.2 sec
- Trigger methods: L disable repeat trigger, H enable repeat trigger
- Sensing range: less than 120 degree, within 7 meters
- Temperature: 15 ~ +70
- Dimension: 32*24 mm, distance between screw 28mm, M2, Lens dimension in diameter: 23mm
SKU: n/a
There are no reviews yet.