-13%
Distance & Proximity, Sensors
Proximity Sensor LM8 1.5 DN
- Improve the noise resistance by adopting a dedicated
- The built-in protection circuit of reverse power polarity (DC 3-wire type)
- Built-in surge protection circuit
- Built-in over current protection circuit (DC type)
- Custom Applications Available Please Call For Applications.
₨ 999 ₨ 1,143
Proximity Sensor LM8 1.5 DN
- Type: Cylindrical round (PR Series)
- Sensing Distance: 1.5 mm
- Header dimension/square: 8 mm
- Connection Type: 2 m cable loose leads
- Voltage: 12 – 24 VDC
- Wire Type: DC 3-wire
- Output Type: NPN
- Frequency: 1500 Hz
Based on 0 reviews
Be the first to review “Proximity Sensor LM8 1.5 DN”
Related products
-
Flex & Force, Sensors
Force Sensitive Resistor 0.5 INCH FSR
- Detection area (detection range): 14.5 mm circle
- Physical Diameter: 18.3mm circle
- The output signal (output signal): Passive variable to hold
- The Force-sensitive range (range), pressure test: 100g to 10 kg
- Lifespan (life):> 10 m letter actuation
Dimensions:
- Total length: 56mm
- Overall width: 18.3mm
- Diameter detection: 14.5mm
- Thickness: 0.4mm
SKU: n/a -
Gas Sensor, Sensors
MQ2 MQ-2 SMOKE SENSOR MODULE
- Operating voltage: 5V
- Analog output voltage: 0V to 5V
- Digital output voltage: 0V or 5V (TTL Logic)
- Preheat duration: 20 seconds
- Sensitivity range: 200 to 10,000 ppm
- Gases detected: LPG, Smoke, Alcohol, Propane, Hydrogen, Methane and Carbon Monoxide
- Dimensions: 3.6 x 2 x 1 cms
- Weight: 5 grams
SKU: n/a -
Gas Sensor, Sensors
MQ135 Air Quality Detector Sensor Module
- Air Quality Sensor Module
- Condition: New
- Size: 32mm X22mm X27mm
- Main chip: MQ-135
- Operating Voltage: 5V DC
- Type: Analog & Digital
- Sensitivity to Ammonia, Sulphide and Benzene steam
- Detecting Range: 100-1000ppm
- With signal output instructions
- TTL output signal is low level
- Analog 0 ~ 5 v voltage output, the higher the concentration, the higher the voltage
- Color is showing pictures.
- Sensitive for benzene, alcohol, smoke
- Fast response and recovery
- Adjustable sensitivity
- Signal output indicator
- Output voltage boosts along with the concentration of the measured gases increases
SKU: n/a -
Others, Sensors
Microphone Amplifier – MAX9814 w/ Auto Gain Control
- The default ‘max gain’ is 60dB, but can be set to 40dB or 50dB by jumpering the Gain pin to VCC or ground.
- You can change the Attack/Release ratio, from the default 1:4000 to 1:2000 or 1:500.
- The ouput from the amp is about 2Vpp max on a 1.25V DC bias, so it can be easily used with any Analog/Digital converter that is up to 3.3V input. If you want to pipe it into a Line Input, just use a 1uF blocking capacitor in series.
SKU: n/a
There are no reviews yet.