-
×
GY-291 ADXL345 3-Axis Accelerometer Module
1 × ₨ 349
Subtotal: ₨ 349
-20%
Pumps, Sensors, Water, Water Pumps
Waterflow Sensor YFS101
This water flow sensor has a pinwheel sensor inside it which helps the sensor detect how much liquid has passed through it. By counting pulses from the output of the sensor water flow can be calculated. Each pulse is approximately 2.25 millimeters.
₨ 749 ₨ 936
Based on 0 reviews
Be the first to review “Waterflow Sensor YFS101”
Related products
-
Accelero, Gyro. IMU, Magneto, Sensors
GY-291 ADXL345 3-Axis Accelerometer Module
- Main Chip: ADXL345
- Model: GY-291
- Power Supply: 3-5V
- Means of Communication: IIC / SPI Communication Protocol
- Measuring Range: ±2g /±16g
- Digital-Output Triple-Axis Accelerometer with a Programmable Full-Scale Range of ±2g, ±4g, ±8g and ±16g and Integrated 16-bit ADCs
- Accelerometer Normal Operating Current: 450µA
- Ultralow Power: as low as 23 μA in Measurement Mode and 0.1 μA in Standby Mode at VS = 2.5 V (typical)
- Sleep Mode Current: 8µA
- Communication: SPI (3- and 4-wire) and I2C Digital Interfaces
- User-Programmable Interrupts
- Wake-On-Motion Interrupt for Low Power Operation of Applications Processor
SKU: n/a -
Gas Sensor, Sensors
MQ135 Air Quality Detector Sensor Module
- Air Quality Sensor Module
- Condition: New
- Size: 32mm X22mm X27mm
- Main chip: MQ-135
- Operating Voltage: 5V DC
- Type: Analog & Digital
- Sensitivity to Ammonia, Sulphide and Benzene steam
- Detecting Range: 100-1000ppm
- With signal output instructions
- TTL output signal is low level
- Analog 0 ~ 5 v voltage output, the higher the concentration, the higher the voltage
- Color is showing pictures.
- Sensitive for benzene, alcohol, smoke
- Fast response and recovery
- Adjustable sensitivity
- Signal output indicator
- Output voltage boosts along with the concentration of the measured gases increases
SKU: n/a -
-
Accelero, Gyro. IMU, Magneto, Sensors
Gy-61 Triple Axis Accelerometer Adxl335
- 3V-6V DC Supply Voltage
- Onboard LDO Voltage regulator
- Can be interfaced with a 3V3 or 5V Microcontroller.
- All necessary components are populated.
- Ultra Low Power: 40uA in measurement mode, 0.1uA in standby@ 2.5V
- Tap/Double Tap Detection
- Free-Fall Detection
- Analog output
- Build in ultra-low noise linear LDO voltage regulator
- Built-in onboard filters, which reduce noise from the motor and other high-current electronics
- All sensors connected to the I2C bus
- You can easily select two I2C addresses for MPU6050 by soldered jumper
- Power LED
- Build in Logic level converter for I2C
- Dimensions 20x16mm
- Designed for 5V logic level
SKU: n/a
There are no reviews yet.