-
×
Jackly Screwdriver set (31in1)
1 × ₨ 299
Subtotal: ₨ 299
Shop
Showing 769–816 of 1337 results
-
Sensors, Temperature, Humidity
INFRARED TEMPERATURE SENSOR GY-906 MLX90614
- Easy to integrate
- Mounted on a breakout board with two types of pins
- 10k Pull up resistors for the I2C interface with optional solder jumpers
- Factory calibrated in temperature range:
- -40+125C for sensor temperature
- -70+380C for object temperature
- High accuracy of 0.5C over a wide temperature range (+50C for both) High (medical) accuracy calibration
- The measurement resolution of 0.02C
- Single and dual-zone versions
- SMB is compatible digital interface
- Customizable PWM output for continuous reading
- Different package options for applications and measurements versatility
SKU: n/a -
Tools
Instant Heat 100W Dual Temperature Hot Melt Glue Gun
- Lightweight, easy-squeeze trigger, rubber coating for easier cleaning, detachable stand to keep the gun stable
- The heater component of the product is made of positive temperature coefficient electric resistance
- It’s heating very fast and has automatic control temperature.
- The hot melt glue gun can use normally in 100V to 240V, place the fuse, use safer.
- It can use at double power i.e at 60W & at 100W
- PTC heating system to ensure high power and quick heating, high glue output, and fast melting.
- Heats quickly (3-5mins), no waste of time.
SKU: n/a -
-
LED Lights & Bulbs
IOT – WiFi Smart Light Bulb – 13W – Dimmable RGB – Timing Control LED
- 2.4GHz Wi-Fi Access, Support app control via both IOS and Android devices
- 16,000,000 colors, dimmable, and color temperature range 2700K/6500K
- Set time schedules and countdowns, available in Group control, and no hub is required
- Wi-Fi enabled and no hub required
- AI-ready for hands-free control with Google Assistant and Amazon Alexa
- Programmable lights to turn on/off at the set time of choice
- Dimmable and adjustable color temperature
SKU: n/a -
Batteries & Chargers, Charging Modules
IP2312 3A Module Type-C Lithium Battery Fast charging
- Main control chip: IP2312
- Input voltage: 4.5~5.5V
- Charging cut-off voltage: 4.2V / 4.35V (the output voltage of the two versions is optional)
- Charging current: 3A (the current can be changed by adjusting the resistance)
- Indicator light: yes
SKU: n/a -
IR & Vision, Sensors
IR Infrared LED Transmitter And Receiver Pair
Transmitter (Tx):
- Power: 0.1W.
- Absolute Maximum Forward Current: 50mA.
- Launch Angle (Approx): 45 Deg.
- Wavelength: 940nm.
- Typical forward voltage drop: 1.1V.
- Diameter: 5mm.
Receiver (Rx):
-
- Power: 0.15W.
- Maximum Current: 30mA.
- Receiving Angle (Approx): 45 Deg.
- Wavelength: 940nm.
- Typical forward voltage drop: 1.2V.
- Diameter: 5mm.
SKU: n/a -
IR & Vision, Mega Payday Sale, Sensors
IR Infrared sensor Two way Obstacle Sensor
- Reliable and accurate: Infrared obstacle avoidance sensors are a reliable and accurate way to detect objects in the environment. They are not affected by ambient light, making them a good choice for applications where there is a lot of light.
- Inexpensive: Infrared obstacle avoidance sensors are relatively inexpensive, making them a cost-effective solution for many applications.
- Easy to use: Infrared obstacle avoidance sensors are easy to use and can be integrated into a variety of applications.
- Durable: Infrared obstacle avoidance sensors are durable and can withstand harsh environments.
SKU: n/a -
Distance & Proximity, IR & Vision, Sensors
IR Proximity Sensor 0A4-1SK
- Type of sensor: photoelectric
- Range : 40~300mm(1.5 to 12)
- Output configuration: Analogue voltage
- Operation mode: Diffuse-reflective
- Supply voltage: -0.3~7V DC
- Connection: S3B-PH
- Max operating current: 22mA
- Average current consumption: 12 mA
- Output voltage differential over distance range: 2.3 V (typical)
- Update period: 16.5 4 ms
- Size: 44.5 mm x 18.9 mm x 13.5 mm (1.75 x 0.75 x 0.53)
- Operating temperature: -10~60C
- Body material: Plastic
SKU: n/a -
IR & Vision, Sensors
IR receiver VS1838B TL1838 – 38KHz
- IR Infrared Receiver 1838 TL1838 VS1838B 38Khz Diode
- Voltage; 2.7-5 .5 V
- Receiving distance; 13-15M
- Size: Pin length 21mm
- frequency: 38khz
- IR Infrared Receiver 1838 TL1838 VS1838B 38Khz DiodeVoltage; 2.7-5 .5 V
- Receiving distance; 13-15M
- Size: Pin length 21mm
- frequency: 38khz
SKU: n/a -
Transistors & Mosfet
IRF244 N-Channel MOSFET Transistor
- Package Type: TO-220
- Transistor Type: N Channel
- Max Voltage Applied From Drain to Source: 55V
- Max Gate to Source Voltage Should Be: 20V
- Max Continues Drain Current is : 49A
- Max Pulsed Drain Current is: 160A
- Max Power Dissipation is: 94W
- Minimum Voltage Required to Conduct: 2V to 4V
- Max Storage & Operating temperature Should Be: -55 to +170 Centigrade
SKU: n/a -
Transistors & Mosfet
IRF3205 MOSFET
- N-Channel Power MOSFET
- Continuous Drain Current (ID) is 110A when VGS is 10V
- Minimum Gate threshold voltage 2V
- Drain to Source Breakdown Voltage: 55V
- Low On-Resistance of 8.0m
- Gate-Source Voltage is (VGS) is 20V
- Rise time is 101ns
- It is commonly used with Power Switching circuits
- Available in To-220 package
SKU: n/a -
Transistors & Mosfet
IRF4905 MOSFET
IRF4905 MOSFET is a P-Channel HEXFET Power MOSFET available in a TO-220AB package and is based on Advanced Process Technology. It is mainly used for fast switching purpose, capable of providing ultra-low on-resistance. This tiny device comes with three terminals called gate, drain and source where the gate terminal is used to control the current on remaining two terminals. The area between source and drain is known as a channel that is widely dependent on the voltage applied to the gate terminal.
SKU: n/a -
-
Transistors & Mosfet
IRF740 N-Channel Power MOSFET
- N-Channel Power MOSFET
- Continuous Drain Current (ID): 10A
- Gate threshold voltage (VGS-th) is 10V (limit = 20V)
- Drain to Source Breakdown Voltage: 400V
- Drain Source Resistance (RDS) is 0.55 Ohms
- Rise time and fall time is 27nS and 24nS
- Available in To-220 package
SKU: n/a -
Transistors & Mosfet
IRF840 N-Channel Power MOSFET
- N-Channel Power MOSFET
- Continuous Drain Current (ID): 8A
- Gate threshold voltage (VGS-th) is 10V (limit = 20V)
- Drain to Source Breakdown Voltage: 500V
- Drain Source Resistance (RDS) is 0.85 Ohms
- Rise time and fall time is 23nS and 20nS
- Available in To-220 package
SKU: n/a -
-
Transistors & Mosfet
IRFP460 Power Mosfet
MOSFET (metal-oxide-semiconductor field-effect transistor, pronounced MAWS-feet) is a special type of field-effect transistor (FET) that works by electronically varying the width of a channel along which charge carriers (electrons or holes) flow. The wider the channel, the better the device conducts. The charge carriers enter the channel at the source and exit via the drain. The width of the channel is controlled by the voltage on an electrode called the gate, which is located physically between the source and the drain and is insulated from the channel by an extremely thin layer of metal oxide.
SKU: n/a -
Others
IRFZ44 N-CHANNEL POWER MOSFET 49A 55V
- Small signal N-Channel MOSFET
- Continuous Drain Current (ID) is 49A at 25C
- Pulsed Drain Current (ID-peak) is 160A
- Minimum Gate threshold voltage (VGS-th) is 2V
- Maximum Gate threshold voltage (VGS-th) is 4V
- Gate-Source Voltage is (VGS) is 20V (max)
- Maximum Drain-Source Voltage (VDS) is 55V
- Rise time and fall time is about 60ns and 45ns respectively.
- It is commonly used with Arduino, due to its low threshold current.
SKU: n/a -
Arduino & IOT Boards, Mic/Voice Recognition, Sensors
Isd1820 Recording And Playback Module With On Board Mic And Loud Speaker
Arduino & IOT Boards, Mic/Voice Recognition, SensorsIsd1820 Recording And Playback Module With On Board Mic And Loud Speaker
- The main chip: is ISD1820.
- Dimensions: 43 x 34 x 11 (LxWxH) mm.
- The working voltage: is DC 3V-5V.
- Loudspeaker: 8 Ohm, 0.5W.
- An easy-to-use 10-second voice recording.
- High-quality, natural voice restored.
- It can be used as a propaganda module.
- With looping, jog playback, and single-pass play function.
- Available single-chip control.
- This module can directly drive a small speaker 8 ohm 0.5W.
- Power supply: 3-5V, which can be accessed by pin power.
- Audio recording control mode: the key to control or microcontroller, IO has drawn the line of control.
SKU: n/a -
Batteries & Chargers, Charging Modules
J5019 Battery Charge Micro USB Lithium Lipo 18650
- Discharging current: Max. 2A
- Charging current: Max. 1A
- Input voltage: 4.5-8V DC
- Output voltage: 4.3-27V DC (Continuously adjustable)
- Charging voltage: 4.2V DC
- Size: 3.3×2.3cm/1.3×0.91″
- Package Included: 8pcs 2A USB Adjustable Boost Module
SKU: n/a -
Sensors, Water
JSN-SR04T Waterproof Ultrasonic Sensor Module
- Operating Voltage: 5V DC
- Static Operating Current: 5mA
- Operating Current: 30mA
- Acoustic Emission Frequency: 40kHz
- Maximum range: 4.5m
- Minimum range: 25cm
- Connection pins: +5V, Trig, Echo, GND
- Module Dimensions: 41mm * 28.5mm
- Sensitivity: ~0.5cm
- Sight Angle: <50
- Operating Temperature: -10 ~ 70 C
- Storage Temperature: -20 ~ 80 C
SKU: n/a -
Soldering Accessories & Tools, Tools
JZQ-599B Soldering Iron Bit/Tip Cleaning Sponge Cleaner High Temperature Enduring Cleaner Sponge For Electric Welding Soldering Iron
Soldering Accessories & Tools, ToolsJZQ-599B Soldering Iron Bit/Tip Cleaning Sponge Cleaner High Temperature Enduring Cleaner Sponge For Electric Welding Soldering Iron
- Cleaning Ball: High-quality brass
- Base: Heavy-duty stainless steel
- Compact and portable, ideal for workbenches
- Anti-slip base for enhanced stability
- Base Diameter: 70 mm (2.75 inches)
- Height: 60 mm (2.36 inches)
- Works with most standard soldering iron tips
SKU: n/a -
Sensors, Temperature, Humidity, Water
K Type Waterproof Thermocouple
- Premium quality: Waterproof insulation lead, rustproof with stainless steel material and fiberglass.
- Good performance: Wire can withstand 400℃ high temperature.
- Application: It consists of two different conductors that produce a voltage proportional to a temperature difference between either end of the pair of conductors.
- 2 terminals: K-type thermocouple with flexible spring, 2 terminals for easy connection.
- Multi-purpose: Widely used for industrial or laboratory testing equipment temperature.
- Use: Fits all temperature controllers.
SKU: n/a -
Arduino & IOT Boards, Keypads
Keypad 3×4
- Ultra-thin design & adhesive backing provides easy integration to any project
- Excellent price-performance ratio
- Easy communication with any microcontroller
- 5 pins 2.54mm pitch connector, 4×3 type 12 keys.
- Sticker can peel off for adhesive mounting.
- Used widely in industrial and home electronic equipment’s, instrument, etc.
- This allows a microcontroller to ‘scan’ the 7 output pins to see which of the 12 buttons is being pressed.
SKU: n/a -
Pen drives, USBs
Kingston USB 32GB
- Capacities1: 32GB
- Speed 3:
- 32-128GB – 10MB/s – 20MB/sread
- Dimensions: 44.9mm x 20mm x 9.2mm
- Operating Temperature: 0C to 60C
- Storage Temperature: -20C to 85C
- Compatible with: Windows10, Windows 8.1, Windows 8, Windows 7.1 (SP1), Mac OS v. 10.9.x+, Linux v. 2.6.x+, Chrome OS
SKU: n/a -
Arduino & IOT Boards, Module
KY-009 RGB LED SMD module
- Using 5050 full-color LED.
- RGB tricolour current一limiting resistance to prevent burnout.
- Through the PWM adjusting three primary colors can be mixed to obtain different colors.
- With a variety of single一chip interfaces.
- Working Voltage: 5V.
- LED Drive Mode: Common cathode driver.
SKU: n/a
