Arduino & IOT Boards
Showing 1–48 of 285 results
-
Mega Payday Sale, Module, Relay Modules, Relay Modules, Relays & Interface Module
1 Channel Relay Module
Mega Payday Sale, Module, Relay Modules, Relay Modules, Relays & Interface Module1 Channel Relay Module
- VCC: Power interface,5V
- GND: Ground
- IN: Control interface.
- Drive Current: At least 4mA
- COM: Control circuit ground, connect to GND
- Size: approx. 41 x 16 x 16mm/ 1.61 x 0.62 x 0.62”
- Weight: Approx. 12g
SKU: n/a -
-
Accelero, Gyro. IMU, Magneto, Sensors
10 DOF IMU Sensor
3 Axis Accelerometer + 3 Axis Gyroscope + 3 Axis Magnetometer + Pressure Sensor on one board i.e.
ADXL 345+L3G4200D+HMC5883L+BMP085 sensors all in one board. There are also a 2.5V voltage regulator, the logic level converter circuit to make it work under the power of 3V-5V. Thanks to the logic level converter circuit, you can connect it with a 3V-5V MCU directly, just plug and play! Also every interrupt pin of the sensors is leaded out.
SKU: n/a -
-
Communication Modules, RFID
125KHz EM18 reader module EM-18 build in coil antenna
- Operating voltage of EM-18: +4.5V to +5.5V
- Current consumption:50mA
- Can operate on LOW power
- Operating temperature: 0C to +80C
- Operating frequency:125KHz
- Communication parameter:9600bps
- Reading distance: 10cm, depending on TAG
- Integrated Antenna
SKU: n/a -
Module, Relay Modules, Relay Modules, Relays & Interface Module
16 Channel Relay Module
- Product Name: 16-Channel Relay Module
- Number of Channels: 16
- Control Signal voltage: 5V, active low
- Load Voltage: AC 250V/10A, AC 125V/15A
- DC 30V 10A
- Input power: 12V
- Each board needs 15-20mA Driver Current
- I / O port driver is active in low level.
- 1-16 channel optionally fully open/closed,
- or any channel.
- Standard interface that can be controlled directly by microcontroller
- Indication LEDs for Relay output status.
- Independent common end COM makes the relay convenient for users to access different signals.
- Use optocoupler protection with high safety performance
- Widely used for all MCU control, industrial sector, PLC control, smart home control.
- Size: 8 x 5.7 x 1.2 inches
- Weight: 8.8 ounces
SKU: n/a -
Display, TFTs Screens
2.4 TFT LCD Shield For Arduino UNO R3 (ILI9340)
The 2.4 inch TFT touch Screen LCD Module For Arduino is a beautiful large touchscreen display shield with built in microSD card connection. The LCD has excellent vivid color contrast. This TFT display is big (2.4 diagonal) bright (4 white-LED backlight) and colorful (18-bit 262,000 different shades). 240×320 pixels with individual pixel control. It has way more resolution than a black and white 128×64 display. This display has a resistive touchscreen attached to it already, so you can detect finger presses anywhere on the screen.
SKU: n/a -
Alphanumeric Displays, Display
2004A 20X4 Character Blue Color LCD Display
- Module size(W x H x T): 98.0 x 60.0 x 14.0mm
- Viewing area(W x H): 76.0 x 26.0mm
- Character size(W x H): 2.94 x 4.74mm
- Dot size:(W x H): 0.54 x 0.54mm
- LCD type & color: STN(Blue), FSTN
- View angle: 6 O’clock
- Display type: positive / negative type
- Control IC & package: KS0073 or EQV, COB
- Operating temperature: -20°C – +70°C
- Storage temperature: -30°C – 80°C
SKU: n/a -
Arduino & IOT Boards, Module, PWM Speed Controllers
20A PWM DC Motor Speed Controller Regulator
- Working Voltage: DC 10V – 60V
- Control Power: 0.01-1200W
- Static Current: 0.010A (Standby)
- Rated Current: 15A
- Max.Current: 20A
- PWM Duty Cycle: 0% -100%
- PWM Frequency: 25 kHz
- Control Voltage: 0-5V
- Potentiometer kind: Single turn
- Resistance: 10k
- Power: 125mW
- Mounting: On cable
- Characteristics: Linear
- Body material: Metal
- Mechanical rotation angle: 300
- Max. operating voltage: 200V
- Material: Plastic, metal
- Module Size: 77x45x29mm
SKU: n/a -
Module, Relay Modules, Relay Modules, Relays & Interface Module
2Channel Relay Module
- 5V 2-Channel Relay interface board, and each one needs 15-20mA Driver Current
- Equiped Equipped with high-current relay, AC250V 10A ; DC30V 10A
- Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic active low)
- Opto-isolated inputs
- Indication LED’s for Relay output status
SKU: n/a -
Sensors, Soil
3 In 1 Soil NPK Sensor Probe For Agricultural Nitrogen Phosphorus Potassium Kit
- Power supply: 5-30VDC
- Maximum power consumption: ≤0.15W
- Operating temperature: -40~80℃
- NPK parameters:
- Range: 0-1999 mg/kg(mg/L)
- Resolution: 1 mg/kg(mg/L)
- Precision: ±2%FS
- Response time: ≤1S
- Protection grade: IP68
- Probe material: 316 stainless steels
- Sealing material: Black flame-retardant epoxy resin
- Default cable length: 2 meters, cable length can be customized.
- Dimensions: 45*15*123mm
- Output signal: RS485/4-20ma/0-5v/0-10v
SKU: n/a -
Display, TFTs Screens
3.5 inch TFT Touch Screen for Arduino Mega
Features:
Name
Parameter
Display Color
RGB 65K color
Screen Size
3.5(inch)
Type
TFT
Driver IC
ILI9488
Resolution
480*320 (Pixel)
Module Interface
4 Wire SPI Interface
Active Area (AA area)
48.96×73.44(mm)
Module PCB Size
56.34×98(mm)
Operating Temperature
-20℃~60℃
Storage Temperature
-30℃~70℃
VCC power voltage
3.3V~5V
Logic IO port voltage
3.3V(TTL)
Rough Weight(Package containing)
With touch: 57 (g)
SKU: LCD336 -
-
Arduino & IOT Boards, Kits, Module, Sensors
37 in 1 Sensor Module Board Set Kit For Arduino Card Board Box
Arduino & IOT Boards, Kits, Module, Sensors37 in 1 Sensor Module Board Set Kit For Arduino Card Board Box
This 37 In 1 Sensor Module Kit for Arduino is supplied with a variety of sensors that are compatible with Arduino Boards. This is the most complete performance starter kit with all the essential Arduino sensors.
It comprises 37 Pcs essential Arduino components. The kit includes the latest Arduino components that can be used to turn your idea into a real product.
Tons of updated lessons and Arduino codes are available on Google and YouTube for free. It is extremely easy for Arduino fancier to control and use these modules. This kit will help you control the physical world with sensors.
SKU: n/a -
Arduino & IOT Boards, Module
4 Bits TM1637 Digital Tube LED 7 Segments Display Module
4 Bits TM1637 Digital Tube LED 7 Segments Display Module is a 12-pin display module with a 4-point common digital tube (0.36 inch) with a clock point. The driver chip is TM1637. It only needs 2 signal lines to enable the MCU to control the 4-bit 8- Segment digital tube.
SKU: n/a -
7 Segments & Dot Matrix, Display
4 digit 7 segment Display for Digital Clock
- Reverse Voltage(Vr): 5 V
- Reverse Leakage Current (Ir): 50A
- Forward Current (If): 25mA
- Peak Forward Current (Ifp): 100 mA
- Power Dissipation (P): 100 mW per Segment
- Operating Temperature (Top): -40C to +80C
- Storage Temperature (Ttsg): -40C to +85C
- Lead Soldering Temperature: 260C
SKU: n/a -
-
Arduino & IOT Boards, Keypads
4×4 Flat Matrix Keypad
- Keypad Layout: 4×4 matrix layout, consisting of 16 keys arranged in four rows and four columns.
- Size: Typically measures 76mm x 69mm (Length x Width).
- Number of Keys: 16 programmable keys, each with a unique position in the matrix.
- Input Method: When a key is pressed, it generates a unique combination of row and column signals, which can be decoded to identify the pressed key.
- Interface: Typically interfaces with microcontrollers or embedded systems using digital I/O pins.
- Material: Made of durable and lightweight materials suitable for various environments.
- Compatibility: Compatible with a wide range of microcontrollers and development boards.
- Application: Commonly used in projects requiring user input, password entry, or menu navigation.
SKU: n/a -
-
Arduino & IOT Boards, Current & Voltage, Sensors
50A SCT-013-000 Non-invasive AC Current Clamp Sensor
Arduino & IOT Boards, Current & Voltage, Sensors50A SCT-013-000 Non-invasive AC Current Clamp Sensor
- Input Current: 0~50A AC
- Output Mode: DC 0~1V
- Non-linearity:2-3%
- Build-in sampling resistance(RL): 62Ω
- Turn Ratio: 1800:1
- Resistance Grade: Grade B
- Work Temperature: -25°C ~ ﹢70°C
- Dielectric Strength(between shell and output): 1000V AC/1min 5mA
- Leading Wire in Length: 1m
- Open Size: 13mm x 13mm
SKU: n/a -
Arduino & IOT Boards, Mega Payday Sale, PWM Speed Controllers
5A Mini DC Motor PWM Speed Controller Module
Arduino & IOT Boards, Mega Payday Sale, PWM Speed Controllers5A Mini DC Motor PWM Speed Controller Module
DC 5V-35V 5A 20khz LED PWM DC Motor Controller Speed Regulation Dimmer available at best price in Pakistan at Electronation Pakistan
- Working voltage: DC4.5V-35V
- Output current: 0-5A
- Output power: 90W (MAX)
- Quiescent current: 7u A(standby mode)
- PWM duty ratio: 1%-100%
- PWM frequency: 20khz
- Size: 30*26mm
- Color: multicolor
- Material: electric components
SKU: n/a -
Alphanumeric Displays, Display
5V 1604 LCD 16×4 Character LCD Screen
16X4 CHARACTER LCD 1604 Blue LCD DISPLAY is a dot-matrix liquid crystal display module specially used for displaying letters, numbers, symbols, etc. 16?4 LCD Display can display 4 lines with 16 characters in each line. Divided into 4-bit and 8-bit data transmission methods. 1604 Blue Character LCD provides rich command settings: clear display; cursor return to origin; display on/o; cursor on/o; display character ashes; cursor shift; display shift, etc.
SKU: n/a -
Module, Relay Modules, Relay Modules, Relays & Interface Module
5v 8 Channel Relay Module Relay Board Relay Arduino Relay Module
Module, Relay Modules, Relay Modules, Relays & Interface Module5v 8 Channel Relay Module Relay Board Relay Arduino Relay Module
- Imported high-quality double-sided compact PCB.
- Opto-isolated inputs mean your digital electronics are safe and noise-free.
- This relay module is 5V active low.
- It is an 8-channel relay interface board, which can controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.
- It is also able to control various appliances and other equipment with a large current.
- 5v Relay output maximum contact is AC250V 10A and DC30V 10A.
- The standard interface can be directly connected with microcontrollers.
- Red working status indicator lights are conducive to safe use.
- Widely used for all MCU control, industrial sector, PLC control, and smart home control.
SKU: MOD554 -
Sensors, Soil
7 in 1 Soil Integrated Sensor EC PH NPK Moisture Temperature Meter
- High precision agriculture sensors, rapid response, good exchange ability
- Good tightness, corrosion resistance, the soil tester can be used in the soil for a long time.
- Flame retardant epoxy resin curing, completely waterproof, the soil tester can withstand strong external impact.
- Steel needles are made of high quality materials that can with stand long-term electrolysis , acid and alkali corrosion in soil.
SKU: n/a -
7 Segments & Dot Matrix, Display
7 Segment Common Anode Display
- Reverse Voltage(Vr): 5 V
- Reverse Leakage Current (Ir): 50A
- Forward Current (If): 25mA
- Peak Forward Current (Ifp): 100 mA
- Power Dissipation (P): 100 mW per Segment
- Operating Temperature (Topr): -40C to +80C
- Storage Temperature (Ttsg): -40C to +85C
- Lead Soldering Temperature: 260C
- Height: 70mm
- Width: 48mm
SKU: n/a -
7 Segments & Dot Matrix, Display
7-Segment 0.75 inch
- Product Name: LED Digital Display Tube
- Type: Common Cathode
- Model: 50AH
- Common Cathode : 3-8
- Digital Display: 1 Digit
- Digital Number: 1 Bit Segment
- Emitted Color: Red
- Pin Number: 10
- Continuous Forward Current: 20mA
- Average Forward Voltage: 2V
- Power Consumption : 3mW
- Luminous Intensity: mcd
- Number Height : 0.5 inch
- Panel Size : 19 x 12. x 8mm / 0.5 x 0.5 x 0.31 inch (L*W*H)
- Total Size : 19 x 12. x mm / 0.5 x 0.5 x 0.55 inch (L*W*H)
- Material : Plastic, Metal
- Color : Black, White
SKU: n/a -
Arduino & IOT Boards, Module
74HC4067 CD74HC4067 Precise Module Digital Multiplexer MUX Breakout Board
Arduino & IOT Boards, Module74HC4067 CD74HC4067 Precise Module Digital Multiplexer MUX Breakout Board
-
16-channel analog/digital multiplexer/demultiplexer
-
Routes one signal to/from any of 16 I/O pins
-
Supports both analog and digital signals (bidirectional)
-
Operates over a wide voltage range:
-
HC: 2V to 6V
-
HCT: 4.5V to 5.5V (TTL compatible)
-
-
Low ON-resistance (~60–70Ω depending on voltage)
-
Fast switching speed (typical ~6ns)
-
Break-before-make switching to prevent shorting
-
Minimal leakage current (±0.8 µA typical)
-
Very low standby power consumption (~8 µA typical)
-
Built-in Enable pin (active LOW) for full shutdown
-
Channel selection via 4 digital address pins (S0–S3)
-
Works reliably in wide temperature range (–55°C to +125°C)
-
Compatible with microcontrollers like Arduino, ESP32, and Raspberry Pi
-
Ideal for expanding ADC input, signal routing, or sensor switching in compact circuits
SKU: n/a -
-
7 Segments & Dot Matrix, Display
8 inch 7 segment display 8 inch seven segment led display
- 8 inch 7 segment Display side pin
- Common anode 7 segment display
- Common cathode 7 segment display
- I.C. compatible
- Low Power Consumption
- High Brightness
- RoHS compliant
- Excellent Color and product Uniformity
- Excellent aesthetic look and Character Appearance
- Easy Mounting on PCB or Sockets
- Low Current Operation
- Excellent digit appearance
- Wide viewing angle
SKU: n/a -
-
Arduino & IOT Boards, Drivers, Module
A3967 Stepper Motor Driver Module
This EasyDriver compatible stepper motor driver module utilizes the Allegro A3967SLB micro-stepping driver to proved a simple and compact means of driving bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors from a microcontroller. By default, the module will accept a 5V TTL step and direction signal from the microcontroller to stop the motor in either full, half, quarter, and eighth-step modes. By shorting jumper SJ2 it can also be configured to be compatible with 3.3V microcontrollers that are not 5V tolerant. An onboard potentiometer allows for setting maximum drive current.
SKU: n/a -
-
Current & Voltage, Sensors
ACS712 Current Sensor 20A
- Module Dimensions: 31 x 13 x 14 mm (LxWxH)
- Weight: 3 gm.
- Supply Voltage: 4.5V~5.5V DC
- Measure Current Range: -20A~ 20A
- Sensitivity: 100mV/A
- The current sensor chips: ACS712_ELC-20A.
- Pin 5V power supply, onboard power indicator.
- There is no the detection current through, the output voltage is VCC / 2.
- The module can be measure plus or minus 20 amps, corresponding to the analog output of 185 mV / A.
SKU: n/a -
Current & Voltage, Sensors
ACS712 Current Sensor 30A
ACS712 Current Sensor 30A current sensor board is based on the Allegro ACS712ELCTR-30A bi-directional hall-effect current sensor chip that detects positive and negative flowing currents in the range of minus 30 Amps to positive 30 Amps. The board operates at 5V DC and the current flow through the sensor is converted to an output voltage starting at 1/2Vcc (or 2.5V) for no current flow and moves up 66mV per amp for positive current or down -66mV per amp for negative current.
SKU: n/a -
Current & Voltage, Sensors
ACS712 Current Sensor 5A
- Module Dimensions: 31 x 13 x 14 mm (LxWxH)
- Weight: 3 gm.
- Supply Voltage: 4.5V~5.5V DC
- Measure Current Range: -5A~ 5A
- Sensitivity: 66mV/A
- The current sensor chips: ACS712_ELC-05B.
- Pin 5V power supply, onboard power indicator.
- There is no the detection current through, the output voltage is VCC / 2.
SKU: n/a -
Arduino & IOT Boards, Module
ADS1115 Analog-to-Digital Converter
- WIDE SUPPLY RANGE: 2.0V to 5.5V
- LOW CURRENT CONSUMPTION: Continuous Mode: Only 150µA Single-Shot Mode: Auto Shut-Down
- PROGRAMMABLE DATA RATE: 8SPS to 860SPS
- INTERNAL LOW-DRIFT VOLTAGE REFERENCE
- INTERNAL OSCILLATOR
- INTERNAL PGA
- I2C INTERFACE: Pin-Selectable Addresses
- FOUR SINGLE-ENDED OR TWO DIFFERENTIAL INPUTS
- PROGRAMMABLE COMPARATOR
- This board/chip uses I2C 7-bit addresses between 0x48-0x4B, selectable with jumpers
SKU: n/a -
Others, Sensors
AH175 Hall Sensor
Hall effect sensor is transducing devices used to detect and generate a voltage when in the presence of a magnetic field. They are designed to induce a voltage as an output when a magnetic field is present at its input. The output voltage can be variable depending on the magnitude of the magnetic field. Hall effect sensors, as they name states are effect sensors, which can be used to sense different categories, like speed, position of objects, rotational speed or frequency and be used as a fault detector. They can be used to detect a time-varying current, as time-varying current produce magnetic fields, which can then be sensed by the Hall effect transducer and produce a voltage with some proportion the amount of magnetic field present at the sensor.
SKU: n/a -
-
Distance & Proximity, Light, Sensors
APDS9960 proximity and light intensity sensor I2C 3.3V
- Gesture recognition using reflected IR
- Digital proximity sensing using reflected IR
- Separate Red/Green/Blue light intensity sensors
- Ambient (clear) light intensity sensor
- IR light-blocking filter
- Interrupt output available
- I2C interface with good library support
- 3.3V operation
SKU: n/a -
Arduino & IOT Boards, Module, Motors & Drivers, Stepper Motor
Arduino 28BYJ48 Stepper Motor
Arduino 28BYJ48 Stepper Motor With ULN2003 Driver Board Description: This is 28YBJ-48 DC 5V 4 phase 5 wire stepper motor with ULN2003 driver board5-wire phase can drive ordinary uln2003 chip can also be connected as phase 2 may be supporting the development board, direct plug. Motor: Diameter: 28mmVoltage: 5VStep angle: 5.625 x 1/64Reduction ratio: 1/64ULN2003 driver board: A, B, C, D LED indication Four-phase stepper motor work status Size: 31x35mmPackage included:1 x ULN2003 driver board1 x 28BYJ-48 stepper motor Options:
SKU: n/a -
Arduino & IOT Boards, Shields
ARDUINO CNC SHIELD V3
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- PWM Spindle and direction pins
- 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
SKU: n/a -
Arduino & IOT Boards, Boards
Arduino Due AT91SAM3X8E ARM Cortex-M3 Board
- MicrocontrollerAT91SAM3X8E
- Operating Voltage3.3V
- Input Voltage (recommended)7-12V
- Input Voltage (limits)6-16V
- Digital I/O Pins54 (of which 12 provide PWM output)
- Analog Input Pins12
- Analog Output Pins2 (DAC)
- Total DC Output Current on all I/O lines130 mA
- DC Current for 3.3V Pin800 mA
- DC Current for 5V Pin800 mA
- Flash Memory512 KB is all available for the user applications
- SRAM96 KB (two banks: 64KB and 32KB)Clock Speed84 MHz
- Length101.52 mm
- Width53.3 mm
- Weight36 g
SKU: n/a -
Arduino & IOT Boards, Boards
Arduino Leonardo R3
he Arduino Leonardo is a microcontroller board based on the ATmega32u4 (datasheet). It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
SKU: ARD-452 -
Arduino & IOT Boards, Boards
Arduino MEGA 2560 PRO Mini
- Microcontroller ATmega2560
- USB-TTL converter: CH340
- Power Out:5V-800mA
- Power IN.: 5V
- Power IN. VIN/DC Jack:5V
- Power Consumption: 5V 220mA
- Logic Level: 5V
- USB: Micro USB
- Clock Frequency: 16MHz
- Operating Supply Voltage: 5V
- Digital I/O: 54
- Analog I/O: 16
- Memory Size: 256kb
- Data RAM Type/Size: 8Kb
- Data ROM Type/Size: 4Kb
- Interface Type : ISP
- Operating temperature 40C/+85C
- Length x Width:38mmx54mm
SKU: n/a
Breadboard GL-12
Ferric Chloride for PCB Etching
Xbee shield V03
PCB Board 4*4
Digital Clamp Meter 600A UNI T UT202A+
UT33C+ Palm Size Multimeter
Wireless Mini Keyboard 2.4GHz with Touchpad & Mouse
Banana dip female small
RGB module Normal
Dual-axis XY Joystick Module for Arduino 








































