-36%
Optical Sensors/Photo Transistors, Sensors
ON Semiconductor L14G3
- L14G3
- PHOTO TRANSISTOR
- PACKAGE/CASE:3-TO-18
- LEADED PROCESS COMPATIBLE: NO
- PEAK REFLOW COMPATIBLE (260 C): NO
- CURRENT RATING:2MA
- MOUNTING TYPE: THROUGH HOL
₨ 299 ₨ 468
ON Semiconductor L14G3
The L14G3 is a Phototransistor with a Collector-Emitter Voltage (Breakdown) of 45 V, Collector-Emitter Voltage(Saturation) of 0.40 V, On-State Collector Current of 2 mA, and Power Dissipation of 300 to 600 mW.
- L14G3
- PHOTO TRANSISTOR
- PACKAGE/CASE:3-TO-18
- LEADED PROCESS COMPATIBLE: NO
- PEAK REFLOW COMPATIBLE (260 C): NO
- CURRENT RATING:2MA
- MOUNTING TYPE: THROUGH HOL
Based on 0 reviews
Be the first to review “ON Semiconductor L14G3”
Related products
-
Sensors, Weight
Load Sensor – 50kg
- Capacity: 40-50kg
- Comprehensive Error: 0.05mv/v
- Output Sensitivity: 1.0 0.1mv/v
- Nonlinearity: 0.03%FS
- Repeatability: 0.03%FS
- Hysteresis: 0.03%FS
- Creep: 0.03 (3min)%FS
- Zero Drift: 0.03(1min)%FS
- Temp. Effect on Zero: 10 1Zero %FS/
- Temp. Effect on Output: 0.05%FS/10
- Zero Output: 0.1mV/V
- Input Resistance: 1000 20
- Output Resistance: 1000 20
- Insulation Resistance: 5000M
- Excitation Voltage: 10V
- Operation Temp. Range: 0+50
- Overload Capacity: 150%FS
SKU: n/a -
Flex & Force, Sensors
Flex Sensor 4.5″
- Thickness: 0.4mm
- Trigger Force: 20g, triggered (default resistance<200kΩ)
- Pressure Measuring Range: 20g~6kg
- Static Pressure & Dynamic Pressure Measurement (within the frequency of 10Hz)
- Initial Resistance: >10MΩ
- Activation Time: <0.01S
- Operating Temperature: -40℃~+85℃
- Lifespan: >1million times
- Hysteresis: +10%，(RF+ -RF-)/FR+，1000g Force
- Response Time: <10ms
- Drift: <5%, 2.5Kg Force, Static load 24H
SKU: n/a -
Accelero, Gyro. IMU, Magneto, Sensors
Gy-61 Triple Axis Accelerometer Adxl335
- 3V-6V DC Supply Voltage
- Onboard LDO Voltage regulator
- Can be interfaced with a 3V3 or 5V Microcontroller.
- All necessary components are populated.
- Ultra Low Power: 40uA in measurement mode, 0.1uA in standby@ 2.5V
- Tap/Double Tap Detection
- Free-Fall Detection
- Analog output
- Build in ultra-low noise linear LDO voltage regulator
- Built-in onboard filters, which reduce noise from the motor and other high-current electronics
- All sensors connected to the I2C bus
- You can easily select two I2C addresses for MPU6050 by soldered jumper
- Power LED
- Build in Logic level converter for I2C
- Dimensions 20x16mm
- Designed for 5V logic level
SKU: n/a -
Accelero, Gyro. IMU, Magneto, Sensors
10 DOF IMU Sensor
3 Axis Accelerometer + 3 Axis Gyroscope + 3 Axis Magnetometer + Pressure Sensor on one board i.e.
ADXL 345+L3G4200D+HMC5883L+BMP085 sensors all in one board. There are also a 2.5V voltage regulator, the logic level converter circuit to make it work under the power of 3V-5V. Thanks to the logic level converter circuit, you can connect it with a 3V-5V MCU directly, just plug and play! Also every interrupt pin of the sensors is leaded out.
SKU: n/a
There are no reviews yet.