Showing 577–624 of 1337 results
DB9 is a commonly known connector used in Serial Asynchronous Data Transmission that are are designed to work with the EIA/TIA 232 serial interface standard. RS-232 (Recommended Standard 232) is the standard for establishing serial data transfer between DTE(Data Terminal Equipment) and DCE(Data Circuit-terminating Equipment.
High quality DC light which operates on 12V DC current is a high quality super bright light and it has 72 LED’s.
Note: Input voltage should not increase from 12v DC for it’s long life
Specification: DC Gear Motor 6v TT Gear Motor Yellow Double Shaft
Operating voltage: 3V-6VDC .
Reduction Ratio: 1:48.
The load current: less than or equal to150mA (3V) , less than or equal to200mA (6V) .
No-load Speed: 90+/-10% rpm(3V), 200±10% rpm(6V) .
Color: Yellow.
Material: Plastic, metal.
Size: 7×2.2×1.8cm
This is 6V DC Motor 10kg-cm 210RPM w/Encoder metal geared DC motor w/Encoder. It is a 6V motor with a 34:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 11 counts per revolution of the motor shaft, which corresponds to 341.2 counts per revolution of the gearbox’s output shaft.
Operating voltage: 3V ~ 6V DC (recommended value 5V)
Maximum torque: 800g.cm
Speed without load: 90x10rpm
Reduction ratio: 1:48
No Load current: 190mA(max.250mA)
Stall Current: ~1A
Strong anti-interference on this motor keeps it safe around micro-controllers.
Buy best quality DC Motor at the minimal rates from ElectroNation.
775 motor, with metal rollers in the front, trailed by a copper coat
Shaft length: 17mm;
Shaft distance across: 5mm
Body Diameter: 42mm; Body Length: 66.7mm
Mounting Hole Size: M4;
Mounting Hole: 2
Buy the best quality DC Motor at minimal rates from Electronation.
Specification
The micro-sized, Arduino enabled, usb development board – cheap enough to leave in any project!
Digispark?is an ATtiny85 based microcontroller development board come with USB interface.?Coding is similar to Arduino, and it use the familiar Arduino IDE for development.
Multimeter probe test lead is ideal for testing digital circuitry. 15mm plug insertion depth, easily connect to universal digital multimeter standard jack. These needle tipped multimeter probes are great for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Pair of multimeter replacement cable leads Red and Black. Fits most standard multimeters, please check specifications for size and diameter of the plug connectors. Copper conductor in silicone shielding, heat resistant plastic leads with sharp metal ends.
A DIP switch is a manual electric switch that is packaged with others in a group in a standard dual in-line package.
A DIP switch also known as DIP switches, toggle switch, over clocking switch, the address switch, mired switch, digital switch, DIP switch
DIP switches are an alternative to jumper blocks. Their main advantages are that they are quicker to change and there are no parts to lose.
This clear double-side tape is a double-coated film, consisting of an acrylic adheisve with extremely high adhesion power and high instant tack. Light and moisture resistant. Permanently bonds plastics and metals. Replaces epoxies and other adhesives.?Clean, dry surface is required for maximum bond strength.
DS1302 is a tickle-charge timekeeping chip which contains a real-time clock/calendar and 31 bytes of static RAM. DS1302 uses serial communication to interact with microcontrollers. Also, it automatically adjust the date for the month with fewer days. Clock operates in 24hr or 12hr format with an AM/PM indicator. DS1302 chip is also commonly used as DS1302 RTC module which comes with a 32 kHz crystal and on-board battery backup all in a small SIP module that is compatible with a breadboard. DS1302 module are used by makers with Arduino, Raspberry Pi and other Micro-controllers.
DIP Switch 6 Positions 
CP2102 USB to TTL 
DC Jack Female Round Shape 
