Subtotal: ₨ 499
Shop
Showing 577–624 of 1337 results
-
Wires & Connectors
DB9 Male/Female Connector
DB9 is a commonly known connector used in Serial Asynchronous Data Transmission that are are designed to work with the EIA/TIA 232 serial interface standard. RS-232 (Recommended Standard 232) is the standard for establishing serial data transfer between DTE(Data Terminal Equipment) and DCE(Data Circuit-terminating Equipment.
SKU: n/a -
LED Lights & Bulbs
DC 12V 72 LED Light Chip in Pakistan
High quality DC light which operates on 12V DC current is a high quality super bright light and it has 72 LED’s.
- Input Volt: 12V DC
- Watt: 60W
- LED Count: 72
- Size: 7.5cm x 7.5cm
Note: Input voltage should not increase from 12v DC for it’s long life
SKU: n/a -
Audio Amplifier
DC 12V-24V 2.1 Channel TPA3116 Subwoofer Amplifier Board High Power Bluetooth Audio Amplifier Board 50W+50W+100W
Audio AmplifierDC 12V-24V 2.1 Channel TPA3116 Subwoofer Amplifier Board High Power Bluetooth Audio Amplifier Board 50W+50W+100W
- Core Chip: TPA3116D2
- Operating voltage range: DC 9-25V (Current 3-4A or more, such as the need for more power recommended 19-24V / 4-5A above)
- Audio input sensitivity: 500-800mV
- Frequency response range: 20Hz-20KHz
- Speaker impedance: L/R CH speaker 3.5-8Ω
- BASS speaker: 2-8Ω
- Maximum output power: 50W(Left CH)+50W(Right CH)+100W(BASS CH)
- Size: approx. 101mmx100mmx30mm / 3.97×3.94×1.18”
SKU: n/a -
Wires & Connectors
DC Barrel Jack
- Achieve the standards of reliable products.
- Good contact interface and fine electrical property.
- Easy to use. No need to cut and solder, plug and operate.
- Firmly connect and safely connect, not loosen.
- Buy with satisfaction and use at ease.
- Work fluency and durability, which saves your time.
- High temperature-resistant covers and copper pins, durable and reliable.
- High matching degree and perfect matching.
SKU: n/a -
Clearance Sale, DC Motor, Motors & Drivers
DC Gear Motor 6v TT Yellow Gear Motor Double Shaft
Specification: DC Gear Motor 6v TT Gear Motor Yellow Double Shaft
Operating voltage: 3V-6VDC .
Reduction Ratio: 1:48.
The load current: less than or equal to150mA (3V) , less than or equal to200mA (6V) .
No-load Speed: 90+/-10% rpm(3V), 200±10% rpm(6V) .
Color: Yellow.
Material: Plastic, metal.
Size: 7×2.2×1.8cmSKU: n/a -
Gear Motor, Motors & Drivers
DC Gear Motor With Encoder (6V 210RPM)
This is 6V DC Motor 10kg-cm 210RPM w/Encoder metal geared DC motor w/Encoder. It is a 6V motor with a 34:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 11 counts per revolution of the motor shaft, which corresponds to 341.2 counts per revolution of the gearbox’s output shaft.
SKU: n/a -
Gear Motor, Motors & Drivers
DC gear motor Yellow
Operating voltage: 3V ~ 6V DC (recommended value 5V)
Maximum torque: 800g.cm
Speed without load: 90x10rpm
Reduction ratio: 1:48
No Load current: 190mA(max.250mA)
Stall Current: ~1A
Strong anti-interference on this motor keeps it safe around micro-controllers.SKU: n/a -
-
Clearance Sale, Wires & Connectors
DC Jack With Wire Female
Specifications:
- Socket Outer Diameter: 5.5mm
- Center Inner Diameter: 2.1mm
- Plastic Housing with Strain Relief
- Pre-attached wires
- Wire Length: 10.8 inches (27.5cm)
- Color-coded wires for center positive connections
- Stripped and tinned ends
- Num of Internal Contacts: 2 (+ and -)
- 18AWG dual copper conductor wiring
SKU: n/a -
Clearance Sale, Wires & Connectors
DC Jack With Wire Male
Specification:
- Transmission voltage: DC12V
- Length: approx. 24cm
- Inner diameter: 2.1mm
- External diameter: 5.5mm
- Material: copper wire
- Red for positive, black for negative
- Use for: Led Driver / Strip connector / CCTV CAMERA /Car camera
- Model Number: DC Power Male Plug
SKU: n/a -
DC Motor, Motors & Drivers
DC Motor (Large)
Buy best quality DC Motor at the minimal rates from ElectroNation.
775 motor, with metal rollers in the front, trailed by a copper coat
Shaft length: 17mm;
Shaft distance across: 5mm
Body Diameter: 42mm; Body Length: 66.7mm
Mounting Hole Size: M4;
Mounting Hole: 2SKU: n/a -
DC Motor, Motors & Drivers
DC Motor (Mini)
Buy the best quality DC Motor at minimal rates from Electronation.
- Product name: DC motor;
- Model: FF-050;
- Operating voltage: 3-12V.
- Output speed: 7400 rpm;
- Motor Size: 1063 x 0.630 x 0.472mm (L x W x H).
- Shaft diameter: 0.059 in;
- Shaft length: 10mm.
- Main Color: Silver Tone.
- Material: metal.
SKU: n/a -
DIY Kits, Multicopter Accesories, Propeller
DC Motor Propeller
Description:
For 4 bladed propeller
- Affordable, lightweight, plastic and 4-bladed propeller.
- It can be connected to the furthest limit of a DC motor.
- Use it to move little vehicles, boats, a fan, or even a wind generator!
- Incredible for use pair with a solar powered cell or a battery pack.
- Viable with a wide assortment of science fair activities.
For 3 bladed propeller:
- Affordable, lightweight, plastic, 3-bladed propeller
- Attaches with ease to any DC motor with standard 2mm shaft
- Propels small cars, boats, fans, wind generators
- Great for science fair projects
- Measures 2.75″ x 2.75″ x 0.5″
- DC motor 3v to 12v high speed
SKU: n/a -
Digital Meter, Mega Payday Sale, Multi Meters
DC Voltmeter 0-30V 7-Segment Display
Specification
- Measuring range: DC4.0-30.0V
- Power supply range: No additional power supply, direct use of the measured voltage as a power supply, the range as above
- The highest input DC is 30.0V. Note: The input voltage higher than 30V may be permanently damaged! Allowable error 1%; greater than or equal to V, the error is 0.3V; less than V error 0.
- Input impedance : > 0K ohms
- Operating current < 23mA
- Refresh speed: about 300mS time
- Display mode: three “0.6” LED digital tube
- Display colour: red
- Lead length: about cm / 7.7 in
- Dimensions: about 4 x 2 x mm / 1. x 1.14 x 0.7 in
- Opening size: about 46 x mm / 1.1 x 1.07 in
- Net weight: about g
- Operating temperature: – ~ 6
SKU: n/a -
-
-
Sensors, Temperature, Humidity
DHT11 Temperature and Humidity Sensor
- Operating Voltage: 3.5V to 5.5V
- Operating current: 0.3mA (measuring) 60uA (standby)
- Output: Serial data
- Temperature Range: 0C to 50C
- Humidity Range: 20% to 90%
- Resolution: Temperature and Humidity both are 16-bit
- Accuracy: 1C and 1%
SKU: n/a -
Arduino & IOT Boards, Boards
Digispark – The tiny, Arduino usb dev board
The micro-sized, Arduino enabled, usb development board – cheap enough to leave in any project!
Digispark?is an ATtiny85 based microcontroller development board come with USB interface.?Coding is similar to Arduino, and it use the familiar Arduino IDE for development.
SKU: ARD692 -
Digital Meter, Multi Meters
Digital Clamp Meter 600A UNI T UT202A+
- Current Measurement Range:
- AC Current: 20A/200A/600A
- Voltage Measurement Range:
- AC Voltage: 2V/20V/200V/600V
- DC Voltage: 200mV/2V/20V/200V/600V
- Resistance Measurement Range: 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ
- Frequency Measurement Range: 10Hz/100Hz/1kHz/10kHz/100kHz/1MHz/10MHz
- Capacitance Measurement Range: 2nF/20nF/200nF/2μF/20μF/200μF/2mF/20mF
- Duty Cycle: 0.1% – 99.9%
- Display: Large LCD display with backlight
- True RMS Measurement: Provides accurate readings for both sinusoidal and non-sinusoidal waveforms
- Non-Contact Voltage (NCV) Detection: Detects the presence of voltage without direct contact for added safety
- Data Hold Function: Freezes measurement readings on the display for easy recording
- Auto Range and Manual Range: Offers both automatic range selection and manual range selection for flexibility in measurements
- Jaw Opening Size: Accommodates conductors up to a certain size for easy clamping
- Safety Rating: Complies with international safety standards and may have CAT (Category) or IEC (International Electrotechnical Commission) safety ratings
- Power Source: Requires batteries (typically AAA batteries)
- Dimensions: Varies depending on the specific model
- Weight: Varies depending on the specific model
SKU: n/a - Current Measurement Range:
-
Digital Meter, Mega Payday Sale, Multi Meters
Digital Clamp Meter DT-266 DT266 AC Digital Clamp Multimeter Electronic Volt Resistance Tester Meter
Digital Meter, Mega Payday Sale, Multi MetersDigital Clamp Meter DT-266 DT266 AC Digital Clamp Multimeter Electronic Volt Resistance Tester Meter
- DC Voltage: 1000V (±0.5%)
- AC Voltage: 750V (±1.2%)
- AC Current: 20-1000A (±2.5%)
- Resistance(ohm): 20M-2000M(±1.0%)
- Battery: 9V Batteries
- LCD Max Reading: 1999
- LCD Display: 14×47mm
- Clamp Diameter: 2.13cm / 0.83″
- Size: 230×70×37mm
- Clamp meter with high accuracy and good reliability
- 3 1/2 digit LCD display max.value 1999
- Data hold function
- The low voltage symbol display
- Overload protection
- Continuity measurement
- Plug-in insulation tester adapter 500VCD(optional)
- Audible continuity
- Low power indication
SKU: n/a -
Digital Meter, Multi Meters
Digital Multimeter DT9205A
- Type: Digital Multimeter
- Model:DT9205A
- Color: Yellow
- DC Voltage Range: 200mV/20V/200V/1000V
- AC Voltage Range: 200mV/2V/20V/200V/750V
- DC Current Range: 20μA/200μA/2mA/20mA/200mA/10A
- AC Current Range: 20μA/200μA/2mA/20mA/200mA/10A
- Resistance Range: 200Ω/2KΩ/20KΩ/200KΩ/2MΩ/20MΩ/200MΩ
- Capacitance Range: 2nF/20nF/200nF/2μF/20μF/100μF
- Battery :1*6F22 9V Battery(Not included)
- Size:19cmx9cmx3cm
SKU: n/a -
Wires & Connectors
Digital Multimeter Needle Tip Probe Test Leads
Multimeter probe test lead is ideal for testing digital circuitry. 15mm plug insertion depth, easily connect to universal digital multimeter standard jack. These needle tipped multimeter probes are great for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Pair of multimeter replacement cable leads Red and Black. Fits most standard multimeters, please check specifications for size and diameter of the plug connectors. Copper conductor in silicone shielding, heat resistant plastic leads with sharp metal ends.
SKU: n/a -
Digital Meter, Multi Meters
Digital Thermometer with Probe
- Range: -40°C to 200°C
- Measurements taken every 1 second
- Protective case with fastening clip
- Accuracy: +/-0.8°C at 0 to 100°C
- Accuracy: +/-1.0°C at -20 to 0°C
- Accuracy: +/-1.5°C at -40 to -20°C or 100 to 200°C
- Resolution: 0.1°C
- Measure Units: °C or °F
- Probe length: 125mm
- Stainless steel penetration probe.
- HACCP Compliant
- EN 13485 Compliant
- Auto switching-off after 5 minutes
- Dimensions: 150 × 20 × 16mm
SKU: n/a -
Dip Switch, Switches And Buttons
DIP Switch (2 Position)
A DIP switch is a manual electric switch that is packaged with others in a group in a standard dual in-line package.
A DIP switch also known as DIP switches, toggle switch, over clocking switch, the address switch, mired switch, digital switch, DIP switch
DIP switches are an alternative to jumper blocks. Their main advantages are that they are quicker to change and there are no parts to lose.
SKU: n/a -
Dip Switch, Switches And Buttons
DIP Switch 10 Positions
- Product Name: DIP Switch
- Type: Horizontal Type
- Features: 10 Positions ( 2 Row 20 Pins)
- Positions: 1/2/3/4/5/6/7/8/9/10
- Pitch: 2.54 mm
- Non-Switching Rating: 100mA DC 50V
- Switching Rating: 25mA DC 24V
- Contact resistance: 50m 24VDC/100mA (at initial),100m typical, 24VDC/100mA (after life test)
- Each Size: 27x10x10mm(L*W*H)
- Main Material: Plastic, Metal
SKU: n/a -
Dip Switch, Switches And Buttons
DIP Switch 6 Positions
- 6 POSITION DIP SWITCH 2.54MM
- FEATURES: 6 POSITIONS ( 2 ROW 12 PIN)
- PITCH : 2.54 MM / 0.1″;NON-SWITCHING RATING : 100MA DC 50V;SWITCHING
- RATING: 25MA DC 24V
- CONTACT RESISTANCE : 50M 24VDC/100MA (AT INITIAL);100M TYPICAL, 24VDC/100MA (AFTER LIFE TEST) : 100M TYPICAL, 24VDC/100MA (AFTER LIFE TEST);EACH SIZE : 12 X 10 X 11 MM / 0.47″ X 0.4″ X 0.43″ (L*W*H)
- MAIN MATERIAL: PLASTIC, METAL;
SKU: n/a -
Alphanumeric Displays, Display
Dmc 20×4 81 JHD204A Character LCD Display
- Product Name: 20×4 LCD Module
- Application: POS Terminal, Flow Meter, Test Instrument, Measuring Meter, Consumer Electronics
- Display Type: STN Blue, FSTN Positive, STN Blue Negative
- Structure: COB
- Polarizer Type: Transflective/Reflective/Transmissive
- Operating Temperature:0-50C/-10-60C/20-70C/-30-80C
- Connector Method: PIN
- Voltage: 5v
- Operating Temperature: 0C- 50C
- Storage Temperature: 10-60C
- Backlight: LED backlight
- 4 lines of 20 characters
SKU: n/a -
Incubator, Mist Makers & Humidifiers
Donut Shape Mini USB Mist Maker Air Humidifier Portable Diffuser
Incubator, Mist Makers & HumidifiersDonut Shape Mini USB Mist Maker Air Humidifier Portable Diffuser
- Shape: Round
- Colour: White, Pink, Blue
- Size: 50x50x20mm
- Power Port: USB
- Operating Voltage: 5v
- Function: Negative ions
- The number of fog mouths: 1
- Water shortage power protection: support
- Line length: 1 meter
SKU: n/a -
-
Accessories
Double Sided Tape
This clear double-side tape is a double-coated film, consisting of an acrylic adheisve with extremely high adhesion power and high instant tack. Light and moisture resistant. Permanently bonds plastics and metals. Replaces epoxies and other adhesives.?Clean, dry surface is required for maximum bond strength.
SKU: n/a -
Batteries & Chargers
Double Slots Li-ion Battery Charger
- The product is brand new, is high quality and has good performance
- Home/Travel Wall AC Multi-Functional/Universal Battery Charger.
- Automatically Stops When Charging is Complete.
- Red/Orange Light Indicates Charging, When Full, It Turns Green.
- Designed to Charge Your Batteries Quickly and Safely.
- Wide Range Of Charging Voltage.
- Slim and Portable Design.
- Gives Convenience to Your Daily Life
- Can Charge All Kinds of 3.7 V Lithium Battery.
SKU: n/a -
Motor Drivers, Motors & Drivers
DRV8825 Stepper Motor Driver with Heat Sink | High-Precision Stepper Control for 3D Printers & CNC
Motor Drivers, Motors & DriversDRV8825 Stepper Motor Driver with Heat Sink | High-Precision Stepper Control for 3D Printers & CNC
- Model: DRV8825
- Supply Voltage: 8.2 – 42 VDC.
- Current Capacity : 2.2A max(24V).
- Continuous current per phase: 1.5 A.
- Minimum Logic voltage: 2.5V.
- Maximum Logic Voltage: 5V.
- Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32.
- Dimensions : 15 x 20 mm.
- Weight: 4 gm.
SKU: n/a -
Arduino & IOT Boards, Module
DS1302 RTC Module
- The real-time clock counts minutes, seconds, date, hours, month day of the week, year and leap-year compensation upto 2100.
- 318 temporary data storage RAM
- Working current of 2.0V, less than 300nA
- Read / Write clock or RAM data with two kinds of mode of single-byte transfer mode and multi-byte character set
- 8 pin DIP package or optional 8 pin SOIC package based on the surface assembly
- Simple 3 wire interface
- Compatible with TTL Vcc=5V
- Double power supply pipe for main power and backup power supply.
SKU: n/a -
ICs
DS1302-RTC-CHIP
DS1302 is a tickle-charge timekeeping chip which contains a real-time clock/calendar and 31 bytes of static RAM. DS1302 uses serial communication to interact with microcontrollers. Also, it automatically adjust the date for the month with fewer days. Clock operates in 24hr or 12hr format with an AM/PM indicator. DS1302 chip is also commonly used as DS1302 RTC module which comes with a 32 kHz crystal and on-board battery backup all in a small SIP module that is compatible with a breadboard. DS1302 module are used by makers with Arduino, Raspberry Pi and other Micro-controllers.
SKU: n/a
