Shop
Showing 961–1008 of 1337 results
-
ICs
NE556 Dual Timer IC
- A dual version of NE556 consists of two precision timers that operate in both monostable and astable modes.
- It is specified for operation from 4.5 V to 16 V.
- TTL compatible output which can source or sink current of up to 150mA.
- Adjustable duty cycle.
- It can produce a timing delay from microseconds to hours.
- The operating temperature range is from 0 to 70 degrees Celsius.
- It has temperature stability better than 0.005% per C.
SKU: n/a -
-
-
Incubator, Mist Makers & Humidifiers
New Ultrasonic Humidifier 3L with LED Lamp Humidifier for Portable Diffuser Mist Maker
Incubator, Mist Makers & HumidifiersNew Ultrasonic Humidifier 3L with LED Lamp Humidifier for Portable Diffuser Mist Maker
- Beauty: Refresh skin, which can be taken as skin care, keeping skin healthy and moist.
- Decoration: Choose the design you like to make the room romantic.
- Humidify: Humidify the air during summer and winter at your home, and refresh the quality of breathing air.
- Purify: Neutralizes static, and reduces infection of the skin.
- Relief: Aroma therapy, relieves stress.
SKU: n/a -
IOT Boards
NODEMCU LUA WIFI BOARD BASED ON ESP8266 CP2102 MODULE
- Wi-Fi Module The ESP-12E module is similar to the ESP-12 module but with 6 extra GPIOs.
- USB micro USB port for power, programming, and debugging
- Headers 2x 2.54mm 15-pin header with access to GPIOs, SPI, UART, ADC, and power pins
- Misc Reset and Flash buttons
- Power 5V via micro USB port
- Dimensions 49 x 24.5 x 13mm
SKU: n/a -
IOT Boards
Nodemcu WROOM ESP32 Wifi Based Microcontroller Development Board
- Universal low power IoT sensor hub.
- Home automation.
- Universal low power IoT recorder.
- Mesh network.
- Video streaming of the camera.
- Industrial wireless control.
- OTT TV box / set-top box device.
- Baby monitor.
- Smart Socket.
- Sensor networks.
- Wi-Fi toys: Counters, toys, Anti-lost device.
- Wearable electronic products.
- Wi-Fi speech recognition device.
- Wi-Fi location-aware devices.
SKU: n/a -
Wires & Connectors
Nokia Charging Jack
- Manufactured using high quality and excellent durable materials.
- Perfect replacement for the original Charging Connector.
- Precision machining fits the cell phone perfectly.
- High-quality OEM product, tested and quality checked for each piece before shipping.
- This part is not returnable so please be sure that you are purchasing the proper & correct part for your specific device.
- The image shown is for presentation purposes only, the actual product will be different from what shown in the image.
SKU: n/a -
Communication Modules, RF Modules
NRF24L01 2.4GHz Wireless Transceiver Module
- Worldwide 2.4GHz ISM band operation Free license to use.
- 126 RF channels.
- High air data rate: 250kbps, 1 and 2Mbps.
- Transmitter: 11.3mA at 0dBm output power.
- Receiver: Fast AGC for improved dynamic range.
- Receiver: Integrated channel filters.
- Enhanced ShockBurst:1 to 32 bytes dynamic payload length,6 data pipe MultiCeiver for 1:6 star networks.
- Host Interface:4-pin hardware SPI,3 separate 32 bytes TX and RX FIFOs.
- Low Power Management:1.9 to 3.6V supply range.
- GFSK modulation.
- Auto packet transaction handling.
- Easy to design.
- Small size:15mm*29mm.
SKU: WRE335 -
Communication Modules, RF Modules
NRF24L01 Antenna Pair
This is NRF24L01 2.4GHz Antenna Wireless Transceiver Module. The nRF24L01 is a highly integrated, ultra-low power (ULP) 2Mbps RF transceiver IC for the 2.4GHz ISM (Industrial, Scientific, and Medical) band. With peak RX/TX currents lower than 14mA, a sub 26A power down mode, advanced power management, and a 1.9 to 3.6V supply range, the nRF24L01 provides a true ULP solution enabling months to years of battery life when running on coin cells or AA/AAA batteries. These RF modules are very popular among the Arduino tinkerers. The nRF24L01 is used on a wide variety of applications that require wireless control. They are transceivers which this means that each module can transmit and receive data.
SKU: n/a -
Breakout Boards
nRF24L01 Breakout Adapter with On-board 3.3V Regulator
- Addicore nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
- On-board 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module
- Allows for easy connection to nRF24L01+ modules
- Small power on SMD LED indicator
- On-Board Voltage Regulator: Voltage Regulator Input Voltage (connected to VCC): 4.8V to 12V
- Voltage Regulator Input Voltage Max: 15V (we recommend staying below 12V)
SKU: n/a -
Heat, Sensors
NTC 10K Ohm 103 5% THERMISTOR TEMPERATURE SENSOR
- Standard Type
- Linear Response Curve
- Temperature Range: -55C to +125C
- Rated Power: 0.5W
- RoHS Compliant
- Resistance: 10K ohm
- Resistance Tolerance: +/- 5 %
- B Constant: 3435K
- B Constant Tolerance: +/- 1 %
- B Constant Class: B25/50
- Temperature Range: -30 to +125 degree C
- Thermistor Type: NTC Thermistor
SKU: n/a -
Display, LCDs & OLEDs
OLED Display Module 12864 0.96 Inch 4Pin
- No need of the backlight
- The display is self-illuminating
- Power requirement is low
- They are offering the large viewing angle
- Full Compatible with Arduino
- Factory configured for SPI protocol (can easily change to IIC)
- Better performance characteristics than traditional LCD and LED displays.
- Only Need 2 I/O Port Control
SKU: n/a -
Mega Payday Sale, Optical Sensors/Photo Transistors, Sensors
OMRON E3Z-D62 100 MA MAX Output 12 VDC to 24 VDC PHOTOELECTRIC Sensor
Mega Payday Sale, Optical Sensors/Photo Transistors, SensorsOMRON E3Z-D62 100 MA MAX Output 12 VDC to 24 VDC PHOTOELECTRIC Sensor
- IP67 rated PBT housing with methacrylate lens
- PNP and NPN output configurations
- Light ON/dark ON selectable
- Small dead-band for sensing close targets
- Retro-reflective versions have a polarised light source for shiny object detection
- Short circuit and reverse polarity protection
- Mutual interference protection (retro and diffuse versions only)
- Operating temperature range -25 °C → +55°C
SKU: n/a -
ICs
OPTOCOUPLER 817 QUAD
Optocoupler 817 QUAD contains an IRED optically coupled to a phototransistor. It is packaged in a 4pin DIP, available in wide-lead spacing option and SMT gullwing lead-form option. Input-output isolation voltage(rms) is 5.0kV. Collector-emitter voltage is 80V(*) and CTR is 50% to 600% at input current of 5mA.
SKU: n/a -
Soldering Accessories & Tools, Soldering Iron
ORIGINAL SOLDERING IRON 25WATTS SP25D WELLER USA 25W
ORIGINAL SOLDERING IRON 25WATTS SP25D WELLER USA 25W long- Featherweight iron with pencil handle- Ideal for hobbies, kits and radios- MT1 3mm diameter replaceable nickel-plated copper tip- Develops 750?F/400?C- Stainless steel barrel- Heat and impact resistant handle
SKU: n/a -
Soldering Accessories & Tools, Soldering Iron
Original TQ95 Soldering Iron – High Precision & Adjustable Temperature
Soldering Accessories & Tools, Soldering IronOriginal TQ95 Soldering Iron – High Precision & Adjustable Temperature
- 2-stage heat system – 20W standard / 200W boost
- Ceramic heater for fast and even heating
- Ergonomic, non-slip handle for maximum comfort
- Includes replaceable TQ-77RT-B tip
- 1.5m high-temp silicone power cord
- Compact 210mm length (excluding cord bushing)
- Ultra-lightweight – only 65g (without cord)
SKU: n/a -
Bread Board, circuit boards
OTH20 170 Tie Points Mini Breadboard
- This is a tiny breadboard, measuring approximately 1.8″ x 1.4″ (46mm x 36mm).
- It is half the size of a regular half-size breadboard.
- The mini breadboard is perfect for small projects and can be easily attached to the top of an Arduino proto shield.
SKU: n/a -
Distance & Proximity, Mega Payday Sale, Sensors
Outdoor 12V Infrared PIR Motion Sensor Switch
-
Detection range : 180
-
Operating voltage : 12V
-
Detection distance : 15m (24) (adjustable)
-
Delay Time : 15 seconds to 7 minutes (adjustable)
-
Installation height :1.8m 2.5m
-
Material : ABS
-
Dimensions : 60 x 47 x 156mm
-
Installation : open type, (hole 16mm) installation, adjusting for the next button
SKU: n/a -
-
Batteries & Chargers
Pack of 2 Camelion Battery AA 1.5V
- Battery with high construction technology to long life
- Do not contain mercury, cadmium (environmentally harmful)
- AA batteries 1.5 V LR06
- High performance, designed for applications in the medium and high absorption
- Resistant to heat and cold
- Non-Rechargeable
SKU: n/a -
Audio Amplifier
PAM8403 Amplifier 3W Digital Power Audio
- Operating Voltage: Wide power supply ranges from 2.5V to 5.5V DC
- Dual-channel stereo with high output power (3W+3W Output at 10% THD with a 4 Load @5v DC)
- Max Gain 24 dB.
- Filterless architecture
- Low Quiescent Current and Low EMI
- Operating Temperature: -40 to +85C
- Short Circuit Protection
- Thermal Shutdown
- Superior Low Noise
- Efficiency up to 90%
- Dimensions (LxWxH) in cm 2.1 x 1.8 x .3
SKU: n/a -
Audio Amplifier
PAM8403 with knob
- Dual channel stereo, high output power (3 w + 3 w power @ 5V and 4 ohms load)
- On-board Volume Control with Built-in Power Switch
- Good sound quality
- Can use computer USB for power supply directly. Double panel wiring solves crosstalk
- Super mini design allows it to be easily placed in a variety of digital products.
- 3W Output at 10% THD with a 4 Load and 5V Power Supply
- Filterless, Low Quiescent Current and Low EMI
- Low THD+N
- Superior Low Noise
- Efficiency up to 90%
- Short Circuit Protection
- Thermal Shutdown
SKU: n/a -
Audio Amplifier
PAM8610 12V Dual Channel Stereo Audio Amplifier Board
- Main Chip: PAM8610
- Power Range: DC 6V-15V (self-protection)
- Recommended Voltage: DC 12V(2A)
- Output Power: 10Wx2(8) 15Wx2(4)
- Frequency Response:20HZ-15KHZ
- Static Current: 20MA (DC12V)
- SNR: 90% Recommended
- Speakers: 10-100W
- Input Impedance: 15K
- Output Impedance: 4-8
- Harmonic Distortion: <0.1%
- Dimensions in mm (LxWxH): 30 x 25 x 4
- Weight(gm): 12
SKU: n/a -
Audio Amplifier, Mega Payday Sale
Pam8610 With Volume 12v Dual-channel Digital Amplifier Board Stereo Audio Amplifier Board 15w * 2
Audio Amplifier, Mega Payday SalePam8610 With Volume 12v Dual-channel Digital Amplifier Board Stereo Audio Amplifier Board 15w * 2
- Supply voltage: DC 7V-15V
- Output power: 10w 10w (8 loads)
- Efficiency: 90%
- Shutdown Current: 4uA
- Quiescent current; 20mA
- SNR: 86%
- Total harmonic distortion: 5W / 1KHz / 8 —- 0.1%
- Frequency range: 20Hz-20KHz
- Input impedance: 15K
- . Output Impedance: 4-8
- . Amplifier board size: 30mm * 25mm * 2.5m
SKU: n/a -
Batteries & Chargers
Panasonic 9V rechargeable battery
- Brand: PANASONIC
- Lot of 24 Panasonic 9V batteries
- Super heavy-duty power
- Individual packs
- Carbon Zinc batteries
- Expiration date: 05/2022
- Superior quality
- Suitable for toys, smoke alarms, and more
- Always a good idea to keep stored in case of emergency
SKU: n/a -
Accessories
PERFECT CONTACT CLEANER
- Contact cleaner improves electrical conductivity and reduces friction and wear.
- The cleaner is moisture, rust, and corrosion-proof.
- Can be used for domestic appliances, garden equipment, car locks, car-lamp holders, plugs, and zippers, hinges, locks, and curtain rails in the house. It is also ideal for bicycle chains and gears and can be used safely on metal, plastic, paint, and rubber.
- This spray does not contain silicones.
- Remove dirt.
- Apply a final coating to moisture, rust, and corrosion-proof the parts, when using the cleaner on switches, cable shoes, plugs, and connectors, move the contacts after applying the final coating.
- Do not use adhesives.
SKU: n/a -
Arduino & IOT Boards, Module, Sensors, Water
Ph Sensor Gravity Sensor Module
- Module Power: 5.00V
- Module Size : 43 x 32mm(1.69×1.26″)
- Measuring Range :0 – 14PH
- Measuring Temperature: 0 – 60 ℃
- Accuracy : ± 0.1pH (25 ℃)
- Response Time: ≤ 1min
- pH Sensor with BNC Connector
- pH2.0 Interface ( 3 foot patch )
- Gain Adjustment Potentiometer
- Power Indicator LED
SKU: n/a -
Optical Sensors/Photo Transistors, Sensors
Photoelectric Sensor G183A10 NA
Photoelectric sensors are electronic devices capable of detecting the approximation, passage and presence of metallic materials or not, through emission and reception of infrared light provided they are located within the distance of actuation of the sensor. The detection of the photoelectric sensor occurs without physical contact between the sensor and the trigger because it has no moving parts subject to mechanical wear and thus increase the life of the equipment. The Photoelectric Sensor price base on the three operating principles Diffuse, Retroreflective, Barrier. Photoelectric sensor price model G18 with plastic housing has tubular shape with 18mm diameter (M18) with cable type or connector depending on type (diffuse, reflective or barrier) has sensing distances of 10, 30 cm, 2 and 5 m. Photoelectric sensor price has electrical configuration type NPN or PNP contacts normally open (NA), normally closed (NF) or (NA + NF) and connection with 2 or 4 pins.
SKU: n/a -
ICs
PIC 16F877 Microcontroller
This robust (200 nanosecond instruction execution) yet easy-to-program (only 35 single word instructions) CMOS FLASH-based 8-bit microcontroller packs Microchip’s robust PIC® architecture into a 40- or 44-pin package. It is upwards compatible with the PIC16C5X, PIC12CXXX and PIC16C7X devices. The PIC16F877A features 256 bytes of EEPROM data memory, self-programming, an ICD, 2 Comparators, 8 channels of 10-bit Analog-to-Digital (A/D) converter, 2 capture/compare/PWM functions, the synchronous serial port can be configured as either 3-wire Serial Peripheral Interface (SPI™) or the 2-wire Inter-Integrated Circuit (I²C™) bus and a Universal Asynchronous Receiver Transmitter (USART). These features make it ideal for more advanced level A/D applications in automotive, industrial, appliances and consumer applications.
SKU: n/a -
Development Boards, PIC Controllers - Microchip
Pic Development Board
PIC development board is powerful development platform for all versions of PIC microcontroller. It can be used for data logging, applications in real time data monitoring controll processes and interactive control panel sytems.
SKU: n/a -
Others, Sensors
Piezo Pack of 5 Large Pickups 45mm
Piezo Pack of 5 Large Pickups 45mm Attach the round disc to the object that will be knocked on such as a door and measure the voltage across the two wires. Piezo elements can also produce sound when a voltage is applied across them. They convert between electricity and vibration in both ways; Vibration applied at the round end can be detected as a voltage across the wire leads and inversely, the voltage applied across the wire leads causes the round end to vibrate.
SKU: n/a -
Others, Sensors
Piezoelectric Shock Tap Sensor Vibration Switch Module
- Item Name: Piezoelectric Shock Tap Sensor Vibration Switch Module
- Item Type: Vibration Switch Sensor Module
- Working Voltage: 5.0V (DC)
- Interface Type: AD/DO
- AO: Analog Signal Output
- DO: TTL Level Output
- Working Temperature: -10 C ~ +70 C
- Size: Approx. 20 x 20mm / 0.8 x 0.8in
- Weight: 4.5 g / 0.2 oz(approx.)
- Test Method and Wiring:
- G (GND):: Power ground
- V (VCC): Operating voltage 5V (DC)
- ADO: Analog signal output
- According to the vibration intension, the higher the output voltage, the higher the vibration amplitude sensitivity can be adjusted by the potentiometer (the left turn sensitivity is low, the right turn sensitivity is high). The high sensitivity output can be adjusted to respond with a mouth blow or a tap with a hand.
- DO: TTL level output. Output signal LED indication. TTL output valid signal is high level, output control power
SKU: n/a -
Distance & Proximity, Sensors
PIR Sensor Detector Smart Switch 220V
- Working Voltage: AC 85-265V
- Sensing angle: 180 degree
- Sensing distance: Max 12m (25℃) (Adjustable)
- Sensor delay: 5s – 6min (Adjustable)
- LUX Setting: 2 – 2000LUX (Adjustable)
- Material: ABS
- IP rating: IP65
- Installation Height: 1.8m – 2.5m
- Lifespan: 50,000 hours
- Working temperature: –10℃ ~ +40℃
- Working humidity: less than 93% RH
- Item size: 15.6 * 6.0 * 4.7cm / 6.1 * 2.4 * 1.9in (L * W * H)
- Item weight: 118g / 4.2oz
- Package size: 20 * 14 * 4.7cm / 7.9 * 5.5 * 1.9in (L * W * H)
- Package weight: 128g / 4.5oz
SKU: n/a -
Converters
Pl2303 Usb to TTL
- 3.3V & 5.0V operations for DDWRT support on different voltage system
- Standard USB type A male and TTL 6pin connector.
- 500mA self-recovery fuse for protection.
- Two data transmission indicator can monitor data transfer status in real-time
- Works with existing COM port PC applications. Ready for Windows 8/7/Vista/Server 2003/XP/2000/CE
- Plastic coating protection from standard wear and tear.
- Size: 52mm X 15.5mm x 6.5mm (L x W x H).
SKU: n/a -
Motors & Drivers, Stepper Motor
PM35S-048 Stepper Motor
This is high torque compact 2-2 PHASE stepper motor with 48 steps per revolution with working voltage 24v 600ma. It has enough torque to move small robots and the motor comes with gear shaft attached.
Usage/Applications
- OA Equipment : Printers / Scanners
- Industrial equipment: Flow control valves
- Automotive : Maters / Optic axis control device
- Home automation appliances like Sewing machines
SKU: n/a
OPTOCOUPLER 817 QUAD 






































