Water
Showing all 12 results
-
Pumps, Sensors, Water, Water Pumps
Horizontal Float Switch (White)
- Switch Closed in Horizontal Position and Open When Vertical
- Corrosion Resistant Polypropylene Construction
- M12 Thread Size for Screw Fixing Internally
- Contact Rating: 220VAC @ 1A
- DC Contact Rating: 24Vdc @ 0.25A
- Temperature Rating: -30C to 100C
- Suitable for Water Tanks and Water Treatment Systems
SKU: n/a -
Pumps, Sensors, Water, Water Pumps
Horizontal Float Switch Black
- Material: plastic
- Color: black
- Switch power(Max): 10W
- Switching voltage(Max):AC 100V
- Switching current(Max):AC 0.5A
- Electric strength: AC1500V/Imin
- Contract resistance: 200 milli-ohm
- Temperature rating:-20 ~ +80
- Cable length: About 400 mm / 15.76″
- Float length: 85 mm / 3.35″
SKU: n/a -
Sensors, Water
JSN-SR04T Waterproof Ultrasonic Sensor Module
- Operating Voltage: 5V DC
- Static Operating Current: 5mA
- Operating Current: 30mA
- Acoustic Emission Frequency: 40kHz
- Maximum range: 4.5m
- Minimum range: 25cm
- Connection pins: +5V, Trig, Echo, GND
- Module Dimensions: 41mm * 28.5mm
- Sensitivity: ~0.5cm
- Sight Angle: <50
- Operating Temperature: -10 ~ 70 C
- Storage Temperature: -20 ~ 80 C
SKU: n/a -
Sensors, Temperature, Humidity, Water
K Type Waterproof Thermocouple
- Premium quality: Waterproof insulation lead, rustproof with stainless steel material and fiberglass.
- Good performance: Wire can withstand 400℃ high temperature.
- Application: It consists of two different conductors that produce a voltage proportional to a temperature difference between either end of the pair of conductors.
- 2 terminals: K-type thermocouple with flexible spring, 2 terminals for easy connection.
- Multi-purpose: Widely used for industrial or laboratory testing equipment temperature.
- Use: Fits all temperature controllers.
SKU: n/a -
Arduino & IOT Boards, Module, Sensors, Water
Ph Sensor Gravity Sensor Module
- Module Power: 5.00V
- Module Size : 43 x 32mm(1.69×1.26″)
- Measuring Range :0 – 14PH
- Measuring Temperature: 0 – 60 ℃
- Accuracy : ± 0.1pH (25 ℃)
- Response Time: ≤ 1min
- pH Sensor with BNC Connector
- pH2.0 Interface ( 3 foot patch )
- Gain Adjustment Potentiometer
- Power Indicator LED
SKU: n/a -
-
-
-
Pumps, Sensors, Water, Water Pumps
Waterflow Sensor YFS101
This water flow sensor has a pinwheel sensor inside it which helps the sensor detect how much liquid has passed through it. By counting pulses from the output of the sensor water flow can be calculated. Each pulse is approximately 2.25 millimeters.
SKU: n/a -
Pumps, Sensors, Water, Water Pumps
Waterflow Sensor YFS201
- Model: YF-S201
- Sensor Type: Hall effect
- Working Voltage: 5 to 18V DC (min tested working voltage 4.5V)
- Max current draw: 15mA @ 5V
- Output Type: 5V TTL
- Working Flow Rate: 1 to 30 Liters/Minute
- Working Temperature range: -25 to +80℃
- Working Humidity Range: 35%-80% RH
- Accuracy: ±10%
- Maximum water pressure: 2.0 MPa
- Output duty cycle: 50% +-10%
- Output rise time: 0.04us
- Output fall time: 0.18us
- Flow rate pulse characteristics: Frequency (Hz) = 7.5 * Flow rate (L/min)
- Pulses per Liter: 450
- Durability: minimum 300,000 cycles
- Cable length: 15cm
- 1/2″ nominal pipe connections, 0.78″ outer diameter, 1/2″ of thread
- Size: 2.5″ x 1.4″ x 1.4″
SKU: n/a -
Pumps, Sensors, Water, Water Pumps
YF-S401 Water Flow Sensor
- Model: YS-S401
- Working Voltage: DC 5V~24V
- Maximum Working Current: 15mA @ 5V DC
- Flow Rate Range: 0.3~6L/min
- Connection: 6mm (external diameter)
- Inlet Water Pipe Diameter: 2.5-4mm
- Load Capacity: 10mA (DC 5V)
- Operating Temperature: 80
- Liquid Temperature: 120
- Operating Humidity: 35%-90%RH
- Water Pressure: 2.0MPa
- Storage Temperature: -25 to + 80
- Storage Humidity: 25%-95%RH
SKU: n/a