-
×
Nema 17 Stepper motor, 6V 1A, 1.8 degree, 2 phase 4 wires
1 × ₨ 449 -
×
MQ7 MQ-7 Gas Sensor Detection Module
1 × ₨ 399
Subtotal: ₨ 848
Accelero, Gyro. IMU, Magneto, Sensors
10 DOF IMU Sensor
Availability:
Out of stock
3 Axis Accelerometer + 3 Axis Gyroscope + 3 Axis Magnetometer + Pressure Sensor on one board i.e.
ADXL 345+L3G4200D+HMC5883L+BMP085 sensors all in one board. There are also a 2.5V voltage regulator, the logic level converter circuit to make it work under the power of 3V-5V. Thanks to the logic level converter circuit, you can connect it with a 3V-5V MCU directly, just plug and play! Also every interrupt pin of the sensors is leaded out.
₨ 1,924
Out of stock
Features:
- 10DOF IMU SENSOR with 3-axis gyroscope ,3 axis accelerometer , 3 axis magnetic field , barometric pressure sensor
- Chips: MPU6050 + HMC5883L + MS5611
- Operating Voltage: 3-5V
- Immersion Gold PCB process
- Communication:IIC Communication Protocol(fully compatible with the 3-5v System, circuit contain LLC)
- Output Format: I2C
- Dimension: 22 x 17mm
Based on 0 reviews
Be the first to review “10 DOF IMU Sensor”
Related products
-
Others, Sensors
Microphone Amplifier – MAX9814 w/ Auto Gain Control
- The default ‘max gain’ is 60dB, but can be set to 40dB or 50dB by jumpering the Gain pin to VCC or ground.
- You can change the Attack/Release ratio, from the default 1:4000 to 1:2000 or 1:500.
- The ouput from the amp is about 2Vpp max on a 1.25V DC bias, so it can be easily used with any Analog/Digital converter that is up to 3.3V input. If you want to pipe it into a Line Input, just use a 1uF blocking capacitor in series.
SKU: n/a -
Heart Rate And Muscle Sensors, Sensors
Biomedical Sensor Pad (10 pack)
This is a 10 pack of Biomedical Sensor Pads, disposable electrodes that can be used to measure EEG, ECG and EMG levels. these little pads are perfect for short-term monitoring of Neurofeedback and Biofeedback purposes. They are to be used once and are very handy because of integrated, latex-free gel. Each pad adheres very well to the skin and the snap connector can be pushed on or removed from the electrode lead with no issue.
SKU: n/a -
-
Current & Voltage, Sensors
ACS712 Current Sensor 30A
ACS712 Current Sensor 30A current sensor board is based on the Allegro ACS712ELCTR-30A bi-directional hall-effect current sensor chip that detects positive and negative flowing currents in the range of minus 30 Amps to positive 30 Amps. The board operates at 5V DC and the current flow through the sensor is converted to an output voltage starting at 1/2Vcc (or 2.5V) for no current flow and moves up 66mV per amp for positive current or down -66mV per amp for negative current.
SKU: n/a
There are no reviews yet.