“DHT11 Humidity & Temperature Sensor” has been added to your cart. View cart
Related products
-
Flex & Force, Sensors
Force Sensitive Resistor 0.5 INCH FSR
0 out of 5(0)- Detection area (detection range): 14.5 mm circle
- Physical Diameter: 18.3mm circle
- The output signal (output signal): Passive variable to hold
- The Force-sensitive range (range), pressure test: 100g to 10 kg
- Lifespan (life):> 10 m letter actuation
Dimensions:
- Total length: 56mm
- Overall width: 18.3mm
- Diameter detection: 14.5mm
- Thickness: 0.4mm
SKU: n/a -
Accelero, Gyro. IMU, Magneto, Sensors
GY-273 Magneto HMC5883L
0 out of 5(0)- Supply Voltage VCC: 3.3 to 6 V
- Heading Accuracy: 1 to 2
- Magnetic Field Range: -8 to +8 Gauss
- I2C Address: 0x1E (7-bit address)
- Max Data Rate: 160 Hz
- Digital Voltage Level: 3.3V
- Dimensions (excluding pins): 18.2mm (0.717) x 13.3mm (0.524) x 2.2mm (0.087)
- Weight: 0.95g (0.034oz)
SKU: n/a -
Others, Sensors
Microphone Amplifier – MAX9814 w/ Auto Gain Control
0 out of 5(0)- The default ‘max gain’ is 60dB, but can be set to 40dB or 50dB by jumpering the Gain pin to VCC or ground.
- You can change the Attack/Release ratio, from the default 1:4000 to 1:2000 or 1:500.
- The ouput from the amp is about 2Vpp max on a 1.25V DC bias, so it can be easily used with any Analog/Digital converter that is up to 3.3V input. If you want to pipe it into a Line Input, just use a 1uF blocking capacitor in series.
SKU: n/a -
Pressure, Sensors
Pressure Sensor MPX5700AP
0 out of 5(0)- On-chip signal conditioned, temperature compensated and calibrated
- 2.5% maximum error over 0°C to 85°C
- Ideally suited for microprocessor or microcontroller-based systems
- Patented silicon shear stress-strain gauge
- Pressure ranges from 15KPa to 700KPa
- Supply voltage ranges from 4.75VDC to 5.25VDC
- Sensitivity of 6.4mV/KPa
- Response time of 1ms
- Durable epoxy unibody element
- Operating temperature ranges from -40°C to 125°C
SKU: n/a
Circular Magnet Black
DHT11 Humidity & Temperature Sensor 





There are no reviews yet.