-
×
MQ135 Air Quality Detector Sensor Module
1 × ₨ 389 -
×
KY-021 Mini Magnetic Reed Module for Arduino
1 × ₨ 149
Subtotal: ₨ 538
-15%
Gas Sensor, Sensors
MQ7 MQ-7 Gas Sensor Detection Module
- Product Name: Gas Sensor Module;
- Model: MQ-7;
- Type: Analog
- Detecting Type : Carbonic Oxide(Co);
- Rated Voltage: DC 5V;
- Rated Current: 180mA
- Detecting Range: 100-1000ppm;
- Pin Quantity: 4;
- Pin Spacing: 1.8mm/ 0.07″
- Pin Definition: AO-analog Output, DO-Digital Output, GND- Ground, VCC-Voltage To Current Converter ;
- Total Size: 35 x 20 x 21mm/ 1.4″ x 0.79″ x 0.83″ (L*W*H)
₨ 399 ₨ 468
MQ7 MQ-7 Gas Sensor Detection Module
The MQ7 gas sensor module is highly useful for carbon monoxide(CO) gas detection at home, car or industry. The sensor module can detect carbon monoxide(CO). It is highly sensitive and responding time is very fast. Depending on the requirements of sensitivity, the sensor can be adjusted with a Potentiometer.
MQ7 MQ-7 Gas Sensor Detection Module Features
- Product Name: Gas Sensor Module;
- Model: MQ-7;
- Type: Analog
- Detecting Type : Carbonic Oxide(Co);
- Rated Voltage: DC 5V;
- Rated Current: 180mA
- Detecting Range: 100-1000ppm;
- Pin Quantity: 4;
- Pin Spacing: 1.8mm/ 0.07″
- Pin Definition: AO-analog Output, DO-Digital Output, GND- Ground, VCC-Voltage To Current Converter ;
- Total Size: 35 x 20 x 21mm/ 1.4″ x 0.79″ x 0.83″ (L*W*H)
Based on 0 reviews
Be the first to review “MQ7 MQ-7 Gas Sensor Detection Module”
Related products
-
Gas Sensor, Sensors
MQ3 MQ-3 Gas Sensor Module
- Model No.: MQ-3
- Dimensions: 36 x 20 x 21 mm (LxWxH)
- Weight: 6gm
- Heater voltage: 50.2V (AC DC)
- Loop voltage: 24V (DC)
- Load resistance: adjustable
- Heating Resistance: 31 3 (Room temperature)
- Heating Power: 900mW
- Surface thermal resistance: 2Kohm-20Kohm (0.4mg/L alcohol)
- Sensitivity: Rs (in air)/Rs (0.4mg/L alcohol) 5
- Working temperature: 20 degrees 2 degree
- Humidity: 65% 5%RH
- Signal output light indicator.
- Analog and level signal output.
- TTL output valid signal is low. (When the output low signal light can be directly connected microcontroller or relay module).
- The carbon monoxide detection with better sensitivity.
- Has a long service life and reliable stability.
- Rapid response recovery features.
SKU: n/a -
Accelero, Gyro. IMU, Magneto, Sensors
Gy-61 Triple Axis Accelerometer Adxl335
- 3V-6V DC Supply Voltage
- Onboard LDO Voltage regulator
- Can be interfaced with a 3V3 or 5V Microcontroller.
- All necessary components are populated.
- Ultra Low Power: 40uA in measurement mode, 0.1uA in standby@ 2.5V
- Tap/Double Tap Detection
- Free-Fall Detection
- Analog output
- Build in ultra-low noise linear LDO voltage regulator
- Built-in onboard filters, which reduce noise from the motor and other high-current electronics
- All sensors connected to the I2C bus
- You can easily select two I2C addresses for MPU6050 by soldered jumper
- Power LED
- Build in Logic level converter for I2C
- Dimensions 20x16mm
- Designed for 5V logic level
SKU: n/a -
Flex & Force, Sensors
Force Sensitive Resistor 0.5 INCH FSR
- Detection area (detection range): 14.5 mm circle
- Physical Diameter: 18.3mm circle
- The output signal (output signal): Passive variable to hold
- The Force-sensitive range (range), pressure test: 100g to 10 kg
- Lifespan (life):> 10 m letter actuation
Dimensions:
- Total length: 56mm
- Overall width: 18.3mm
- Diameter detection: 14.5mm
- Thickness: 0.4mm
SKU: n/a -
Accelero, Gyro. IMU, Magneto, Sensors
GY521 MPU6050 Module 6DOF
- Chip: MPU-6050
- Power supply: 3v-5V
- Gyroscope range: + 250 500 1000 2000/ s
- Acceleration range: 2 4 8 16 g
- Communication: Standard IIC communication agreement
- Chip built-in 16 bit AD converter, 16 bits of data output
- Pin Pitch 2.54 mm
- SIZE: 20.3mm x 15.6mm
SKU: n/a
There are no reviews yet.