-
×
8 Position DIP Switch
1 × ₨ 79 -
×
Autonics BEN500-DFR Photoelectric Sensor
1 × ₨ 5,399
Subtotal: ₨ 5,478
Shop
Showing 433–480 of 1337 results
-
Arduino & IOT Boards, Boards
Arduino Pro Mini 5V 16Mhz ATMEGA328
- 131 Powerful Instructions – Most Single Clock Cycle Execution
- Up to 20 MIPS Throughput at 20 MHz
- Two 8-bit Timer/Counters with Separate Prescaler and Compare Mode
- One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode
- Real Time Counter with Separate Oscillator
- Six PWM Channels
- 8-channel 10-bit ADC in TQFP and QFN/MLF package
- Programmable Watchdog Timer with Separate On-chip Oscillator
- On-chip Analog Comparator
- 23 Programmable I/O Lines
SKU: n/a -
Arduino & IOT Boards, Shields
Arduino Proto Breadboard
- It has a nice standard 0.1×0.1 prototyping grid with big pads
- Comes with Stacking headers and plain header, choose whichever you want when soldering together
- A IC pattern for adding DIP ICs up to 20 pins
- Power rails down the middle and sides
- A reset button and an extra general use button
- 2 3mm general use LEDs, red and green, as well as 2 matching resistors
- A pass-thru ICSP stacking header so you can stack any kind of shield on top, and/or use an AVR programmer
- A surface-mount chip area for up to 14 SOIC size parts
- Compatible with tiny breadboards
- Every pin is brought out!
- Gold plated pads
- 2 x 0.1uF capacitors on either side for extra power stability
- It has a nice standard 0.1×0.1 prototyping grid with big pads
SKU: n/a -
Arduino & IOT Boards, Module
Arduino SD Card Reader Module
- Support Micro SD Card (<=2G), Micro SDHC card (<=32G) (high-speed card)
- The level conversion circuit board that can interface level is 5V or 3.3V
- Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board
- Communication interface is a standard SPI interface
- 4 M2 screw positioning holes for easy installation
- Size: 4.1 x 2.4cm
SKU: n/a -
Arduino & IOT Boards, Module, Others, Sensors, Shields
Arduino Sensor Shield
- It has a Pin 13 LED pilot.
- It has D0-D13 IO ports.
- A0-A5 analog IO ports.
- It contains a reset button.
- It also contains a Power LED.
- It has an SD card interface.
- It contains an Ultrasonic interface.
- This expansion board has an RS232 interface.
- It has a Bluetooth interface.
- It has an APC220 interface.
- IIC interface.
- 12864 LCD Parallel interfaces.
- It contains 12864 LCD Serial Interface
SKU: n/a -
Arduino & IOT Boards, Kits
Arduino Starter Kit RFID Based
Arduino Starter Kit RFID Based walks you through the basics of using the Arduino & RFID in a hands-on way. You’ll learn through building several creative projects. The kit includes a selection of the most common and useful electronic components with a book of 15 projects. Starting from the basics of electronics to more complex projects, the kit will help you control the physical world with sensors and actuators.
This kit aims to bring Arduino together with RFID technology, which will support individual production. With this kit, you will be able to use RFID with the code you wrote in Arduino. You will be able to come up with a practical technology such as Arduino, a technology that many people like RFID are trying to get into and stay away from using. All of the components and components required for RFID technology are combined in this kit.
Radio Frequency Identification (RFID) is the given name to the technology used to identify objects using radio waves. An RFID microchip embedded in a tag, keychain or card communicates with the reader/writer module to transfer data.
SKU: 167 -
Arduino & IOT Boards, Boards, Mega Payday Sale
Arduino UNO R3 Dip
- ATmega328 microcontroller
- Input voltage – 7-12V
- 14 Digital I/O Pins (6 PWM outputs)
- 6 Analog Inputs
- 32k Flash Memory
- 16Mhz Clock Speed
- ATmega328
- Operating Voltage 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) 6-20V
- Digital I/O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins 6
- DC Current per I/O Pin 40 mA
- DC Current for 3.3V Pin 150 mA
- Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader SRAM
- 2 KB (ATmega328) EEPROM
- 1 KB (ATmega328)
- Clock Speed 16 MHz
SKU: n/a -
Arduino & IOT Boards, Boards
Arduino UNO R3 Dip WITH CABLE
- ATmega328 microcontroller
- Input voltage – 7-12V
- 14 Digital I/O Pins (6 PWM outputs)
- 6 Analog Inputs
- 32k Flash Memory
- 16Mhz Clock Speed
- ATmega328
- Operating Voltage 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) 6-20V
- Digital I/O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins 6
- DC Current per I/O Pin 40 mA
- DC Current for 3.3V Pin 150 mA
- Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader SRAM
- 2 KB (ATmega328) EEPROM
- 1 KB (ATmega328)
- Clock Speed 16 MHz
SKU: ARD-002 -
Cases & Enclosure
Arduino UNO R3 Enclosure Transparent Clear Case
- To protect your little computer against damages, dust, and scratches Clear Top and Bottom.
- This case provides easy access to all ports
- It requires no tools for easy assembly and disassembly
- Simply Clicks Together Enclosure
- This case is a beautiful yet simple way to show off your UNO!
SKU: n/a -
Arduino & IOT Boards, Boards
Arduino UNO R3 SMD – Economic
- ATmega328-AU microcontroller with UNO Bootloader Installed.
- USB Programming Facilitated by the CH340G.
- Input voltage – 7-15V.
- 0-5V outputs with 3.3V compatible inputs.
- 14 Digital I/O Pins (6 PWM outputs).
- 6 Analog Inputs.
- ISP Header.
- 32k Flash Memory.
- 16MHz Clock Speed.
- All SMD Construction.
- R3 Shield Compatible
SKU: ARD-317-1 -
Arduino & IOT Boards, Boards
Arduino UNO R3 SMD – Economic WITH CABLE
- ATmega328-AU microcontroller with UNO Bootloader Installed.
- USB Programming Facilitated by the CH340G.
- USB-B Connector and cable included.
- Input voltage – 7-15V.
- 0-5V outputs with 3.3V compatible inputs.
- 14 Digital I/O Pins (6 PWM outputs).
- 6 Analog Inputs.
- ISP Header.
- 32k Flash Memory.
- 16MHz Clock Speed.
- All SMD Construction.
- R3 Shield Compatible
SKU: ARD-317 -
Arduino & IOT Boards, Module, Shields
Arduino WiFi Shield CC3000
- Based on TI CC3000 WIFI module.
- Use SPI communication .
- Integrated 3.3V regulator .
- Level shifter integrated .
- Integrated ceramic antenna .
- It has a connector for external antenna WIFI
- Compatible with Arduino UNO, Mega, Leondardo & Micro
- Antenna: Onboard Ceramic
- MicroSD card slot onboard
- Reset button
- Communication Protocol: SPI
- Connects via IEEE 802.11 b/g networks
- Tx Bandwidth: 11Mbps
- Tx Sensitivity: +/-18dBm
- Rx sensitivity: -86dBm
- IRQ pin for interrupts (useful for asynchronous connections)
- Supports WEP, WPA, WPA2, TKIP and AES
- TCP and UDP Client & Server Modes available
- Max Concurrent TCP/UDP Sockets: 4
- TCP/IP stack is built in.
SKU: n/a -
Arduino & IOT Boards, Bluetooth, Communication Modules, Module
AT-09 HM10 / HM-10 4.0 BLE Bluetooth Serial CC2540 CC2541 Module For IOS 6/Android 4.3
Arduino & IOT Boards, Bluetooth, Communication Modules, ModuleAT-09 HM10 / HM-10 4.0 BLE Bluetooth Serial CC2540 CC2541 Module For IOS 6/Android 4.3
- Ultra Low Standby Power 90uA ~ 400uA
- Communication Distance Range : 100 ft / 60mtr
- Super Fast Reaction Speed : 0.4 Sec.
- Built-in PCB antena
- Power Input : 3.6V To 6V DC (Cannot higher than 6V)
- Size : 43 X 15 mm
- Color : Blue
- Net weight : 4g
SKU: n/a -
ICs
ATMEGA 328P ATMEGA328P-PU MICROCONTROLLER
The ATMEGA328P-PU is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATmega328P-PU achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize power consumption versus processing speed.
The AVR core combines a rich instruction set with 32 general purpose working registers. All the 32 registers are directly connected to the Arithmetic Logic Unit (ALU),allowing two independent registers to be accessed in one single instruction executed in one clock cycle. The resulting architecture is more code efficient while achieving throughputs up to ten times faster than conventional CISC microcontrollers.The ATmega328P-PU AVR is supported with a full suite of program and system development tools including: C Compilers, Macro Assemblers, Program Debugger/Simulators, In-Circuit Emulators, and Evaluation kits.
SKU: n/a -
ICs
Atmega8 Microcontrollers IC 8Kbytes
The Atmel AVR ATmega8 is a low-power CMOS 8-bit microcontroller based on the AVR RISC architecture. By executing powerful instructions in a single clock cycle, the ATmega8 achieves throughputs approaching 1MIPS per MHz, allowing the system designer to optimize power consumption versus processing speed.
SKU: n/a -
ICs
Atmel Attiny85 Attiny-85 ATtiny85-20PU
Features of ATtiny85 Microcontroller:-
- Flash (Kbytes): 8 Kbytes
- Pin Count: 8
- Max. Operating Freq. (MHz): 20 MHz
- CPU: 8-bit AVR
- Number of Touch Channels: 3
- Hardware QTouch Acquisition: No
- Max I/O Pins: 6
- Ext Interrupts: 6
- USB Interface:No
- Package – SMD
SKU: n/a -
Arduino & IOT Boards, Light, Sensors
Automatic Photocell Street Light Sun Switch Sensor 12V or 220V
- Its color is white and blue.
- Its size is 5 x 4.2 x 3.3 cm.
- Its input voltages are AC 220V or DC 12V.
- Its maximum load current is 10A.
- Its frequency range is 50 to 60 Hz.
- It is widely used in street lighting, highways, factories, gardens, ports, airports, farms, parks, schools, and other places.
SKU: n/a -
-
AVR/Atmel, Development Boards
AVR C51 Development Board
Support for 51 series microcontroller STC89C52, STC12C5A60S2, AT89C51, AT89C52, AT89S51, AT89S52 most commonly used. In addition, to support the other 40 feet of the 51 series microcontroller and the ATmega16! STC89C52, STC12C5A60S2 can serial direct download program for, AT89S series microcontroller needs need specialized programming download program with USBISP a download manager program, AT89C series microcontroller. The ATmega16 use need to use an adapter plate, the download program needs USBISP Downloader!
SKU: n/a -
Battery Testers, Testers
Battery Capacity Indicator DC 8V-100V Voltmeter Voltage Gauge 12V 24V 48V 72V
Battery Testers, TestersBattery Capacity Indicator DC 8V-100V Voltmeter Voltage Gauge 12V 24V 48V 72V
- Item Type: Battery Monitor
- Material: ABS
- Display Color: Colored
- Voltage Measurement Range: DC8-80V
- Measurement Accuracy: 1% ± 1 word.
- Display: LCD screen
- Measurement Speed: about 2 times per second.
- Dimensions: Approx. 6.5 x 3.5 x 1.5cm / 2.6×1.4×0.6in
- Installation Size: Approx .58 x 28mm / 2.3×1.1in
- Lead Length: 20cm / 7.9in
SKU: n/a -
Batteries & Chargers, Battery Testers
Battery Meter Checker Tester -7 Cell Capacity
Digital Battery Capacity Checker Cellmeter 7
Compatible device: NiCd, NiMH, LiPo, LiFe, Li-ion
Use for LiPo LiFe Li-ion NiMH Nicd battery
Applies to check the batteries
2.1″ screen display
Battery Type: NiCd /NIMH, Li-Po, LiFe, Li-Ion
Cell number: NiCd/NIMH(4-7 Cells),Lithium type(2-7 Cells)
Display Mode: Battery cell voltages, total voltages, lowest cell voltage, Highest cell voltage gap between highest cell voltage and lowest cell voltage, Remaining battery capacity(%)SKU: n/a -
Batteries & Chargers, Battery Management System (BMS)
Battery Protection Board 2s 8a Bms For 18650 Lithium Ion Cells Hx-2s-jh10
Batteries & Chargers, Battery Management System (BMS)Battery Protection Board 2s 8a Bms For 18650 Lithium Ion Cells Hx-2s-jh10
- Model: HX-2S-JH10
- Size: 40*17*3.5mm
- Over-discharge voltage range: 2.5-3.0v±0.05v
- Overcharge voltage range: 4.25-4.35v±0.05v
- Upper limit working current: 8A
- Upper limit instantaneous current: 10A
- Working temperature: -40— 50 °C
- Storage conditions: -40– 80 ° C
- Quiescent current: less than 10uA
- Effective life: more than 50,000 hours
- Internal resistance: less than 300mΩ
- Charging voltage: 8.4V-9V
- Short circuit protection: protection, disconnect load delay self-recovery Solder join
SKU: n/a -
Optical Sensors/Photo Transistors
Baumer O300-GR (11110414) Diffuse Photoelectric Sensor
Baumer O300-GR (11110414) diffuse photoelectric sensor offering reliable non-contact object detection, high precision sensing, and stable performance for industrial automation, material handling, and manufacturing systems.
SKU: n/a -
-
Transistors & Mosfet
BC108
- Bi-Polar NPN Transistor
- DC Current Gain (hFE) is 900 maximum
- Continuous Collector current (IC) is 200mA
- Emitter Base Voltage (VBE) is 5V
- Base Current(IB) is 10mA maximum
- Available in TO-18 Metal Can Package
- Maximum Collector-Base Voltage |Vcb|: 30 V’
- Collector Dissipation: 0.3 W
- Transition Frequency:150 MHz
- Operating Junction Temperature Max (Tj): 175 °C
- Noise Figure – 2 dB
- Operating and Storage Junction Temperature Range -65 to +175 °C
- Collector Capacitance 5pF
SKU: n/a -
-
Common Components, ICs
BC547-B166 NPN Transistor 50V/ 0.3A
Overall, the BC547 NPN transistor is a versatile and reliable transistor that is suitable for a wide range of applications. NPN Transistor BC547 is a popular choice for electronic hobbyists and engineers because it is inexpensive and easy to use. here are the specifications of the BC547-B166 NPN transistor:
- Collector current (maximum): 300mA
- Collector-emitter voltage (maximum): 65V
- Base current (maximum): 5mA
- Current gain (hFE): 110 to 800
- Package: TO-92
SKU: n/a -
Transistors & Mosfet
BC557
- Package Type: TO-92
- Transistor Type: PNP
- Max Collector Current(IC): -100mA
- Max Collector-Emitter Voltage (VCE): -45V
- Max Collector-Base Voltage (VCB): -50V
- Max Emitter-Base Voltage (VBE): -5V
- Max Collector Dissipation (Pc): 500 Milliwatt
- Max Transition Frequency (fT): 100 MHz
- Minimum & Maximum DC Current Gain (hFE): 125 to 800
- Max Storage & Operating temperature Should be: -65 to +150Centigrade
SKU: n/a -
Transistors & Mosfet
BD139 – NPN TRANSISTOR
- Plastic casing NPN Transistor
- Continuous Collector current (IC) is 1.5A
- Collector-Emitter voltage (VCE) is 80 V
- Collector-Base voltage (VCB) is 80V
- Base Current (Ib) is 0.5A
- Emitter Base Breakdown Voltage (VBE) is 5V
- DC current gain (hfe) is 40 to 160
- Available in To-225 package
SKU: n/a -
Transistors & Mosfet
BD140 General Purpose PNP Epitaxial Silicon Transistor
- Bi-Polar PNP Transistor
- Continuous Collector current (IC) is -1.5A
- Collector-Emitter voltage (VCE) is- 80 V
- Collector-Base voltage (VCB) is- 80V
- Base Current (Ib) is -0.5A
- Emitter Base Breakdown Voltage (VBE) is -5V
- DC current gain (hfe) is 40 to 160
- Available in To-225 and SOT-32 Package
- Collector Dissipation: 12.5 W
- Operating Junction Temperature Max (Tj): 150°C
SKU: n/a -
Arduino & IOT Boards, Kits
Beginner Arduino Uno Starter Kit
In Pakistan, the Arduino Starter Kit Arduino Basic Kit Arduino Beginner Kit is the finest educational option for learning how to utilize the Arduino platform. It includes an Arduino Uno SMD board, an enhanced version of the R3, a variety of sensors and, Motor, led’s Dot-matrix, Lcd, and many other components required for the very first steps with electronics into the realm of interactive and sensing objects. The Arduino Starter Kit is an excellent present for children aged 9 to 99. The Arduino starter kit is an open-source electronics prototyping platform built on adaptable, user-friendly hardware and software. It includes all of the necessary components to begin programming with the Arduino Uno board.
SKU: n/a -
Pumps, Water Pumps
Best Mini 5v DC Water Pump/Submersible Pump For Arduino
- Operating Current: 130 ~ 220mA
- Operating Voltage: 2.5 ~ 6V
- Flow Rate: 80 ~ 120 L/H
- Maximum Lift: 40 ~ 110 mm
- Driving Mode: DC, Magnetic Driving
- Continuous Working Life: 500 hours
- Material: Engineering Plastic
- Outlet Outside Diameter: 7.5 mm
- Outlet Inside Diameter: 5 mm
SKU: n/a -
Arduino & IOT Boards, Pumps, Water Pumps
Best Mini 5v DC Water Pump/Submersible Pump For Arduino
- Operating Current : 130 ~ 220mA
- Operating Voltage : 2.5 ~ 6V
- Flow Rate : 80 ~ 120 L/H
- Maximum Lift : 40 ~ 110 mm
- Driving Mode : DC, Magnetic Driving
- Continuous Working Life : 500 hours
- Material: Engineering Plastic
- Outlet Outside Diameter: 7.5 mm
- Outlet Inside Diameter: 5 mm
SKU: n/a -
Transistors & Mosfet
BF495
- Package Type: TO-92
- Transistor Type: NPN
- Max Collector Current(IC): 30mA
- Max Collector-Emitter Voltage (VCE): 20V
- Max Collector-Base Voltage (VCB): 30V
- Max Emitter-Base Voltage (VBE): 5V
- Max Collector Dissipation (Pc): 300 Milliwatt
- Max Transition Frequency (fT): 120 MHz
- Minimum & Maximum DC Current Gain (hFE): 35 to 125
- Max Storage, Operating & Junction temperature range: -65 to +150 Centigrade
SKU: n/a -
Converters
Bi Directional Communication Data Rs232 To Rs485 Serial Converter Stm485s
- Interface: Compatible with EIA /TIA RS-232C Standard and RS-485 Standard
- Electronic interface: At the side of RS-232 is a DB9 female (Hole-type) connector. At the side of RS-485 is DB9 Male (Needle-Type) Connector, with a connection board.
- Working mode: Asynchronous, half-duplex, differential transmission.
- Transmission media: Twisted pair or shielded twisted pair (STP)
- Transmission rate: 300-115200bps
- Telecommunications protocol: Transparent
- Mechanical dimension: 95mm x 33mm x 17mm
- Transmission distance: 1200m (RS-485), 5m (RS-232)
- Working environment: -10 degrees Celsius to 85 degrees Celsius, relative humidity: 5% to 95%
- Signals: RS-232 232: TXD, RDX, RTS, CTS, DTR, DSR, DCD, GND; RS-485: Data, Data-, GND
SKU: n/a
